4-Pin LED Lamp (7.6 mm) OVFSxxC8 • Packaged in tubes • Compatible with automatic placement equipment Product Photo Here • Compatible with infrared and vapor phase reflow solder process • Mono-colors • Pb-free The OVFSxxC8 series is designed with higher forward voltage to maximize brightness and incorporates a low- profile lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low current requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square package allows high-density arrays to form light engines. Applications • Illumination for signs and channel letters • Automotive: Rear stop/turn signal lamps/truck marker lamps • Traffic signals, pedestrian and walkway • Mood-setting decoration and landscape lighting signs • Special decorative interior/exterior lighting • Special effects stage lighting Part Number DIM A Beam Angle Material Emitted Color Flux Typ. mlm Lens Color [1.50] 100° AllnGaP Amber 8000 Clear OVFSAAC8 .059 [1.29] 70° InGaN Blue 2500 Clear OVFSB7C8 .051 [1.29] 70° InGaN Green 8500 Clear OVFSG7C8 .051 [1.50] 100° AllnGaP Red 8000 Clear OVFSRAC8 .059 [1.90] 60° InGaN White 7000 Clear OVFSW6C8 .075 RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue C 09/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 1 of 8 4-Pin LED Lamp OVFSxxC8 o Absolute Maximum Ratings T = 25 C unless otherwise noted A -40 ~ +100 °C Storage Temperature Range Blue, Green, Red, Amber, White Blue, Green, Red, Amber -40 ~ +100 °C Operating Temperature Range -40 ~ +95 °C White 5 V Reverse Voltage Blue, Green, White 35 mA Continuous Forward Current Red, Amber 70 mA Blue, Green, White 100 mA Peak Forward Current (10% Duty Cycle, 1 kHz) Red, Amber 200 mA Blue, Green, White 154 mW Power Dissipation Red, Amber 210 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb) 260° C / 3 sec max Electrostatic Discharge Classification (JEDE-JESD22-A114F) Class 2 Optical and Electrical Characteristics (T = 25° C) A PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS SYMBOL Blue 1650 2500 ---- 5500 8500 ---- Green I = 30 mA F 3850 7000 ---- Φ Luminous Flux White v mlm Red 5500 8000 ---- I = 70 mA F Amber 6600 8000 ---- Blue & Green ---- 3.6 4.4 I = 30 mA F V Forward Voltage V F White ---- 3.6 4.4 Red, Amber ---- 2.5 3.0 I = 70 mA F Blue & Green I Reverse Current White ---- ---- 100 μA V = 5 V R R Red, Amber Blue 460 470 475 I = 30 mA F Green 515 527 535 λ Dominant Wavelength nm D Red 620 628 637 I = 70 mA F 584 591 599 Amber 0.2895 x Chromaticity Coordinates White I = 30 mA F 0.2905 y Blue & Green ---- 70 ---- I = 30 mA F 2Θ½H-H 50% Power Angle White ---- 60 ---- deg ---- 100 ---- I = 70 mA Red, Amber F OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 8 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin LED Lamp OVFSxxC8 Standard Bins LEDs are sorted to luminous flux (Φ), luminous intensity (I ), forward voltage (V ), and dominant wavelength (λ ) V F D bins shown. Each tube will consist of a single intensity bin, forward voltage bin and dominant wavelength bin. Orders may be filled with any of the intensity bins or color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Luminous Intensity (I ) @ 30mA Dominant Wavelength (nm) Forward Voltage (V ) @ 30mA V F Blue: OVFSB7C8 Blue: OVFSB7C8 BLUE: OVFSB7C8 & IV Code Min (mlm) Max (mlm) nm Code Min (nm) Max (nm) GREEN: OVFSG7C8 F0 1650 2220 B3 460 465 VF Code Min (V) Max (V) G0 2200 2750 B4 465 470 27 2.8 3.0 H0 2750 3300 B5 470 475 28 3.0 3.2 29 3.2 3.4 2a 3.4 3.6 Green: OVFSG7C8 Green: OVFSG7C8 IV Code Min (mlm) Max (mlm) 2b 3.6 3.8 nm Code Min (nm) Max (nm) M0 5500 6600 2c 3.8 4.0 G6 515 520 N0 6600 8730 2d 4.0 4.2 G7 520 525 P0 8730 11,000 2e 4.2 4.4 G8 525 530 Q0 11,000 13,200 G9 530 535 Luminous Intensity (I ) @ 70mA Forward Voltage (V ) @ 70mA Dominant Wavelength (nm) V F Amber: OVFSAAC8 Amber: OVFSAAC8 Amber: OVFSAAC8 & IV Code Min (mlm) Max (mlm) nm Code Min (nm) Max (nm) Red: OVFSRAC8 N0 6600 8730 A3 587 590 VF Code Min (V) Max (V) P0 8730 11,000 A4 590 593 23 2.0 2.2 Q0 11,000 13,200 A5 593 596 24 2.2 2.4 25 2.4 2.6 Red: OVFSRAC8 26 2.6 2.8 Red: OVFSRAC8 IV Code Min (mlm) Max (mlm) 27 2.8 3.0 nm Code Min (nm) Max (nm) M0 5500 6600 RE 620 637 N0 6600 8730 P0 8730 11,000 Q0 11,000 13,200 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue C 09/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 3 of 8 4-Pin LED Lamp OVFSxxC8 Standard Bins (I = 30 mA) F LEDs are sorted to luminous flux (Φ), forward voltage (V ), and chromaticity coordinates (x,y) bins shown. Each F tube will consist of a single intensity bin, forward voltage bin, and chromaticity bin. Orders may be filled with any of the intensity bins or color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Φ Luminous Flux Bin Min (mlm) Max (mlm) M0 5500 6600 N0 6600 8730 P0 8730 11,000 V Forward Voltage F Bin Min (V) Max (V) 27 2.8 3.0 28 3.0 3.2 29 3.2 3.4 2a 3.4 3.6 2b 3.6 3.8 2c 3.8 4.0 2d 4.0 4.2 2e 4.2 4.4 Chromaticity Coordinates (x, y) Rank We Wf Wg Wh Cx 0.2640 0.2735 0.2808 0.2720 0.2720 0.2808 0.2880 0.2800 0.2735 0.2830 0.2895 0.2808 0.2808 0.2895 0.2960 0.2880 Cy 0.2670 0.2860 0.2740 0.2575 0.2575 0.2740 0.2620 0.2480 0.2860 0.3050 0.2905 0.2740 0.2740 0.2905 0.2760 0.2620 Rank Wj Wk Wm Wn Cx 0.2830 0.2950 0.2998 0.2895 0.2895 0.2998 0.3045 0.2960 0.2950 0.3070 0.3100 0.2998 0.2998 0.3100 0.3130 0.3045 Cy 0.3050 0.3210 0.3028 0.2905 0.2905 0.3028 0.2865 0.2760 0.3210 0.3370 0.3150 0.3028 0.3028 0.3150 0.2970 0.2865 Rank Wp Wq Wr Ws Cx 0.3070 0.3185 0.3200 0.3100 0.3100 0.3200 0.3215 0.3130 0.3185 0.3300 0.3300 0.3200 0.3200 0.3300 0.3300 0.3215 Cy 0.3370 0.3485 0.3270 0.3150 0.3150 0.3270 0.3075 0.2970 0.3485 0.3600 0.3390 0.3270 0.3270 0.3390 0.3180 0.3075 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Page 4 of 8 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin LED Lamp OVFSxxC8 Typical Electro-Optical Characteristics Curves — OVFSB7C8 (Blue) & OVFSG7C8 (Green) Forward Current vs Forward Voltage Relative Luminous Flux vs Forward Current Relative Luminous Flux vs Wavelength Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 70° Reverse Current vs Reverse Voltage Angular Distribution OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue C 09/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 5 of 8 4-Pin LED Lamp OVFSxxC8 Typical Electro-Optical Characteristics Curves — OVFSAAC8 (Amber) & OVFSRAC8 (Red) Forward Current vs Forward Voltage Relative Luminous Flux vs Forward Current Relative Luminous Flux vs Wavelength Maximum Forward DC Current vs Am- bient Temperature 50% Power Angle: 100° Angular Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Page 6 of 8 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin LED Lamp OVFSxxC8 Typical Electro-Optical Characteristics Curves — OVFSW6C8 (White) Forward Current vs Forward Voltage Relative Luminous Flux vs Forward Current Relative Luminous Flux vs Wavelength Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 60° Angular Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue C 09/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 7 of 8 4-Pin LED Lamp OVFSxxC8 Packaging 60/Tube Aluminum Moisture-proof Bag Bar Code Label Desiccant OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Page 8 of 8 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com