Manufacturers
TT ELECTRONICS PS30-10PC3BR10K
Description
Res POT 10K Ohm 20% 0.2W(1/5W) Pin Thru-Hole
Part Number
PS30-10PC3BR10K
Price
Request Quote
Manufacturer
TT ELECTRONICS
Lead Time
Request Quote
Category
Resistors » Resistor Trimmers, Potentiometer and Rheostat
Specifications
Manufacturer
TT electronics
Manufacturers Part #
PS30-10PC3BR10K
Lead Time
11 Week Lead Time
Industry Aliases
PS30-10PC3BR10K
Sub-Category
Trimmers, Potentiometers and Rheostat Resistors
Brand
BI Technologies
Packaging
Tray | Box
Series
PS
Factory Pack Quantity
270
Datasheet
Extracted Text
Model PSxx Slide Potentiometer 100,000 Cycle Life Metal/Plastic Lever RoHS Compliant MODEL STYLE Single Gang PSxx-1 Dual Gang PSxx-2 1 ELECTRICAL Resistance Range, Ohms 500 -1M Standard Resistance Tolerance ± 20% Resistance Tapers A,B,C Residual Resistance Terminals 1 to 2:Less than 10 ohms Terminals 2 to 3:Less than 30 ohms Input Voltage, Maximum Linear B taper: 200 Vac Other tapers: 150 Vac Linear B taper: 20mm: 0.1W / 0.05W, 30mm: 0.2W / 0.1W Power rating, Watts (Single Unit / Dual Unit) 45mm: 0.25W / 0.125W, 60mm:0.2W / 0.2W Other tapers: 20mm: 0.05W / 0.025W, 30mm: 0.1W / 0.05W 45mm: 0.125W / 0.06W, 60mm:0.1W / 0.1W Dielectric Strength 300Vac, 1 minute Insulation Resistance, Minimum 100M ohms at 250Vdc/ 1 minute Sliding Noise Less than 100mV Gang Error ±3dB (-40dB to 0dB) MECHANICAL Static Stop Strength, Minimum 5.0 Kgf/cm Operating Force 10gf to 100gf Detent Slip-out force 30gf to 200gf DURABILITY Sliding Life 100,000 cycles 1 Specifications subject to change without notice. General Note BI Technologies Corporation TT Electronics reserves the right to make changes in product specification without notice or 4200 Bonita Place, Fullerton, CA 92835 USA liability. All information is subject to TT Electronics’ own data and is considered accurate T: +1 714 447 2345 at time of going to print. www.ttelectronics.com August 16, 2016 page1 of 4 © TT electronics plc Model PSxx 2 ORDERING INFORMATION Model PSxx PS30 – 1 0 P C 1 B R100K Model Style Total Resistance Tapers: Travel in millimeters A = Audio 15, 20, 30, 45, 60 B = Linear C = Reverse Audio Number of Gangs: Lever Material: Detent Lever Length: 1 = Single P = Plastic 2 = Dual 0 = Without See “L” Code M = Metal Lever Type: 1 = Center Below See Below STANDARD RESISTANCE VALUES, OHMS 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1 MEG Plastic Lever Types Metal Lever Types 2 Contact our customer service for custom designs and features. General Note BI Technologies Corporation TT Electronics reserves the right to make changes in product specification without notice or 4200 Bonita Place, Fullerton, CA 92835 USA liability. All information is subject to TT Electronics’ own data and is considered accurate T: +1 714 447 2345 at time of going to print. www.ttelectronics.com August 16, 2016 page2 of 4 © TT electronics plc Model PSxx OUTLINE DRAWING PSxx-1 Single Gang PSxx-2 Dual Gang General Note BI Technologies Corporation TT Electronics reserves the right to make changes in product specification without notice or 4200 Bonita Place, Fullerton, CA 92835 USA liability. All information is subject to TT Electronics’ own data and is considered accurate T: +1 714 447 2345 at time of going to print. www.ttelectronics.com August 16, 2016 page3 of 4 © TT electronics plc Model PSxx MODEL A B C D E F G PS15-1 30 26 15 17.8 20.2 28.8 --- PS15-2 30 26 15 17.8 20.2 28.8 18 PS20-1 35 31 20 22.8 25.2 33.8 --- PS20-2 35 31 20 22.8 25.2 33.8 23 PS30-1 45 41 30 32.8 35.2 43.8 --- PS30-2 45 41 30 32.8 35.2 43.8 33 PS45-1 60 56 45 47.8 50.2 58.8 --- PS45-2 60 56 45 47.8 50.2 58.8 48 PS60-1 75 71 60 62.8 65.2 73.8 --- PS60-2 75 71 60 62.8 65.2 73.8 63 CIRCUIT DIAGRAM PSxx-1 Single Gang PSxx-2 Dual Gang General Note BI Technologies Corporation TT Electronics reserves the right to make changes in product specification without notice or 4200 Bonita Place, Fullerton, CA 92835 USA liability. All information is subject to TT Electronics’ own data and is considered accurate T: +1 714 447 2345 at time of going to print. www.ttelectronics.com August 16, 2016 page4 of 4 © TT electronics plc
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the PS30-10PC3BR10K?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Res Cermet Trimmer 100 Ohm 20% 0.125W(1/8W) 1(Elec)/1(Mech)Turn 1.93mm (3.2 X 3.51 X 2.21mm) J-Hook ...
Res Cermet Trimmer 100K Ohm 20% 0.125W(1/8W) 1(Elec)/1(Mech)Turn 1.93mm (3.2 X 3.51 X 2.21mm) J-Hook...
Res Cermet Trimmer 100K Ohm 20% 0.125W(1/8W) 1(Elec)/1(Mech)Turn 1.93mm (3.2 X 3.51 X 2.21mm) J-Hook...
Res Cermet Trimmer 100K Ohm 20% 0.125W(1/8W) 1(Elec)/1(Mech)Turn 1.93mm (3.2 X 3.51 X 2.21mm) J-Hook...
Res Cermet Trimmer 100 Ohm 20% 0.125W(1/8W) 1(Elec)/1(Mech)Turn 1.93mm (3.2 X 3.51 X 2.21mm) J-Hook ...
Res Cermet Trimmer 100 Ohm 20% 0.125W(1/8W) 1(Elec)/1(Mech)Turn 1.93mm (3.2 X 3.51 X 2.21mm) J-Hook ...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods