Angle Position Sensors ANG Sensors Thin, programmable, non-contact magnetic position sensors capable of continuous rotation, with dual outputs available. Description The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft. Actuator magnet part number AS500106 is required to assure proper operation (ordered separately). Features Typical Applications  Angular position sensor with high tolerance for misalignment  Hydraulic valves O  Non-contact angular position sensing and full 360 rotation  Hydraulic controls  Custom programming available for: angle range, slope, PWM  Electric drives output – contact factory  Pneumatic controls  No mechanical interface means no parts to wear out or jam  Zero-contact encoder alternative  Comes with 20 AWG 305 mm (12”) discrete wire leads  Gear selection / shifting position  RoHS Compliant  Lifting / ride height position  IP68*  Throttle / pedal position  Maximum air gap of 6 mm (0.24”)  Steering wheel position  Compliant to industrial/automotive EMC/EMI/ESD directives Environmental Specifications ⁰ ⁰ ⁰ ⁰ Operating Temperature -40 C to 140 C (-40 F to 284 F) Ingress Protection IP68* **Contact ZF for details on testing conditions Electrical Specifications Input Supply Voltage Maximum Overvoltage Reverse Battery Protection 5.0 VDC ± 10% 16 VDC 12 VDC Output Signal 0.5 – 4.5 VDC (with 5 VDC input) Input Current Single output 8 mA typ., 10 mA max. Dual output 16 mA typ., 20 mA max. Resolution 12 bit ⁰ ⁰ Accuracy, overall Programmed angle sensing range 35 < 65 : ± 2.5% Full scale ⁰ ⁰ Programmed angle sensing range: 65 < 360 : ± 2.0% Full scale ⁰ ⁰ Output Linearity Programmed angle sensing range 35 < 65 : ± 2.5% Full scale ⁰ ⁰ Programmed angle sensing range: 65 < 360 : ± 1.0% Full scale Mechanical Specifications ⁰ ⁰ Measuring Range 0 to 360 , customizable (see graph) Air Gap 1 mm to 6 mm (application dependent); 2.5 mm typ. Eccentricity ± 2 mm (0.08”) www.cherryswitches.com Page 1 of 2 Last update 2016-07-12; specifications subject to change without notice. Products Part Number Output Interface ANG-11HAW1 Analog single 20 AWG x 305 mm (12") discrete wires ANG-21HAW1 Analog dual 20 AWG x 305 mm (12") discrete wires Typical Output vs. Angular Rotation (as percentage of input) Dimensions mm (inches) www.cherryswitches.com Page 2 of 2 Last update 2016-07-12; specifications subject to change without notice.