SMD OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY Series RoHS/RoHS II compliant Pb 25.4 x 22.1 x 12.7 m m | | | | | | | | | | | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = 1 FEATURES: APPLICATIONS: • Cellular Infrastructure • 25.4 x 22.1 x 12.7 mm True SMT- RoHS Compliant Reflow-able Package • SC-Cut, High “Q” resonator based design • Radar Systems • Either Sinewave or CMOS RF output • Test & Measurement Equipment • Available with ±30 ppb over -40°C to +75°C operating temperature Range • GPS Tracking with precision hold-over accuracy • Tighter Stabilities to ±5.0 ppb over 0°C to +50°C also available • WiMax / WLAN • Exceptional long-term Aging of ±500 ppb over 10-Year Product Life • Excellent close-in phase noise (-135 dBc/Hz Typical @100 Hz offset from 10MHz carrier) STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes RF Output 10.00 100.00 MHz CMOS output Frequency 10.00 100.00 MHz Sinewave output 10.00, 12.80, 13.00, 16.384, 20.00, 26.00, 38.40, Standard Available Frequencies 38.88, 40.00, 100.00 MHz Operable Temperature Range 0 50 º C See Stability Options Frequency Stability Options 0º C to +50ºC ±5.00 ppb Default Spec. -20º C to +70ºC ±10.00 ppb Option “E” -40º C to +75ºC ±30.00 ppb Option “F” Frequency Stability vs. Supply ±20.00 ppb Voltage (Vdd ± 5%) ±100.00 ppb In < 3-minutes Warm-Up @ 25 ºC Power Consumption @ turn on 3.60 Watts Power Consumption Steady State 1.40 Watt Supply Voltage (Vdd) 3.135 3.30 3.465 Volts See Options 2.60 2.80 3.00 Volts For Vdd=+3.3V version Reference Voltage (Vref) (available as an output to facilitate oscillator tuning) 4.30 4.50 4.70 Volts For Vdd=+5.0V version Aging Daily aging (after 30 days) ±1.0 ppb Yearly ±100 ppb 10-Years ±500 ppb Waveform LVCMOS Level "1" (Logic High) 0.9*Vdd Volts Level "0" (Logic Low) 0.1*Vdd Volts Load 15 pf Rise & Fall Time 5.0 ns Duty Cycle 45 55 % Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 | fax 949-546-8001| ww w .abrac on.c om SMD OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY Series RoHS/RoHS II compliant Pb 25.4 x 22.1 x 12.7 m m |||| | | | | | | | | | | | STANDARD SPECIFICATIONS contd. Parameters Minimum Typical Maximum Units Notes Waveform Sinewave Peak Power 2.00 dBm Output Load 50 Ω Spectral Content Spurious Response -70 dBc Phase Noise @ 10MHz Carrier (Vdd=3.3V) @ 1 Hz offset -90 dBc / Hz @ 10 Hz offset -120 dBc / Hz @ 100 Hz offset -135 dBc / Hz @ 1,000 Hz offset -145 dBc / Hz @ 10,000 Hz offset -150 dBc / Hz @ 100,000 Hz offset -150 dBc / Hz @ 1,000,000 Hz offset -150 dBc / Hz Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Vdd Volts Frequency Pull Range ±0.7 ppm Frequency Pull Slope Positive Control Voltage Port Impedance 10 kΩ Center Control Voltage (Vdd/2) -0.5 Vdd/2 (Vdd/2) +0.5 Volts OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY - - MHz - - Supply Voltage Option Frequency in MHz Temperature Options RF Output Options Blank: 3.30V±5% Such as; 10.000 MHz Blank: ±5.0ppb/0°C to+50°C Blank: CMOS A: 5.00V±5% 26.000 MHz E: ±10.0ppb/-20°C to +70°C SW: Sinewave 100.000 MHz F: ±30.0ppb/-40°C to +75°C OUTLINE DIMENSIONS Recommended Soldering Pattern Pin Function 1 Control Voltage 2 VREF 3 Supply Voltage 4 RF-output 5 Ground. Case Dimensions: Inches (mm) Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000| fax 949-546-8001| ww w .abrac on.c om SMD OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY Series RoHS/RoHS II compliant Pb 25.4 x 22.1 x 12.7 m m |||||| | | | | | | | | | REFLOW PROFILE: T max to T (Ramp-up Rate) 3°C/second max. S L Prehe at Tempe rature Min. (T Min.) 150°C S Tempe rature Typical (T Typ.) 175°C S Tempe rature Max. (T Max.) 200°C S Time (t ) 60 ~ 180 seconds S Ramp-up rate (T to T ) 3°C/second max. L p Time Maintained Above: --Temperature (T )/Time (T ) 217°C/60 ~ 150 seconds L L Peak Temperature (T ) 250°C max. for 10 seconds p Target Peak Temperature (T Target) 250°C +0/-5°C p Time within 5°C of actua l peak (t ) 20 ~ 40 seconds p Ramp-down Rate 6°C/second max. Tune 25°C to Peak Temperature (t) 8 minutes max. PACKAGING: (15) units per tray ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000| fax 949-546-8001| ww w .abrac on.c om