OVEN CONTROLLED CRYSTAL OSCILLATOR ESD Sensitive RoHS / RoHS II Compliant Pb AOCJY2 Series 21.0 x 21.0 x 11.0 mm FEATURES: APPLICATIONS:  21.0 x 21.0 x 11.0 mm Leaded- RoHS Compliant Reflow-able Package  Cellular Infrastructure  SC-Cut, High “Q” resonator based design  Radar Systems  Either Sinewave or CMOS RF output  Test & Measurement Equipment  Available with ±30 ppb over -40°C to +75°C operating temperature range  GPS Tracking with precision hold-over accuracy  Tighter Stabilities to ±5.0 ppb over 0°C to +50°C also available  WiMax / WLAN  Exceptional long-term Aging of ±500 ppb max. over 10-Year Product Life  Excellent close-in phase noise (-140 dBc/Hz Max. @100Hz offset; 10MHz carrier) STANDARD SPECIFICATIONS: Notes Parameters Minimum Typical Maximum Units Notes RF Output Overall Frequency Frequency 10.00 100.00 MHz range Standard Available Frequencies 10.00, 12.80, 13.00, 26.00, 38.88, 40.00, 100.00 MHz Waveform CMOS Level "1" (Logic High) 0.9*Vdd Volts Level "0" (Logic Low) 0.1*Vdd Volts Load 15 pf Rise & Fall Time 6.0 ns Duty Cycle 45 55 % Waveform Sinewave Peak Power 2.00 dBm Output Load 50 Ω -10 Short Term Stability /second Alan Variance 2x10 See Stability Operable Temperature Range -40 75 º C Options Frequency Stability Options 0º C to +50ºC (Note #1) ±5.00 ppb Default Spec. -20º C to +70ºC ±10.00 ppb Option “E” -40º C to +75ºC ±30.00 ppb Option “F” Frequency Stability vs. Supply ±5.00 ppb Voltage (Vdd ± 5%) Frequency Stability vs. Load ±5.00 ppb Variation (± 10%) Warm-Up @ 25 ºC ±100.00 ppb In < 3-minutes Power Consumption @ turn on 3.00 Watts Power Consumption Steady State 1.00 Watts Supply Voltage (Vdd) 3.13 3.30 3.46 Volts See Options Note #1: ±5.00 ppb stability is only available for F0 < 40MHz. For frequencies above 40MHz, the best available frequency stability is ±10.00 ppb over -20°C to +70°C Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.12.14 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 | fax 949-546-8001| ww w .abrac on.c om OVEN CONTROLLED CRYSTAL OSCILLATOR ESD Sensitive RoHS / RoHS II Compliant AOCJY2 Series Pb 21.0 x 21.0 x 11.0 mm STANDARD SPECIFICATIONS - continued. Parameters Minimum Typical Maximum Units Notes Aging Daily ±1.0 ppb First Year ±100 ppb 10-Years ±500 ppb Spectral Content Spurious Response -35 dBc Phase Noise (10MHz Carrier) @ 5V @ 1 Hz offset -90 dBc @ 10 Hz offset -120 dBc @ 100 Hz offset -140 dBc @ 1,000 Hz offset -145 dBc @ 10,000 Hz offset -150 dBc Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Vdd Volts Frequency Pull Range ±0.70 ppm Frequency Pull Slope Positive Control Voltage Port Control Voltage Port Impedance 10 kΩ Impedance Center Control Center Control Voltage (Vdd/2) -0.5 Vdd/2 (Vdd/2) +0.5 Volts Voltage 2.70 2.80 2.90 Volts Output @ Pin#5 Reference Voltage (Vdd=3.3V) 4.40 4.50 4.60 Volts Output @ Pin#5 Reference Voltage (Vdd=5.0V) Storage Temperature -40 +100 º C OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY2 - - MHz - - Supply Voltage Option Blank : 3.30V RF Output Options A : 5.00V Blank : CMOS SW : Sinewave Frequency in MHz Temperature Options Such as; 10.000 MHz E : -20°C to +70°C 26.000 MHz F : -40°C to +75°C 100.000 MHz Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.12.14 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 | fax 949-546-8001 | ww w .abrac on.c om OVEN CONTROLLED CRYSTAL OSCILLATOR ESD Sensitive RoHS / RoHS II Compliant Pb AOCJY2 Series 21.0 x 21.0 x 11.0 mm OUTLINE DIMENSIONS REFLOW PROFILE: PACKAGING: (20) units per tray T max to T (Ramp-up Rate) 3°C/second max. S L Preheat Temperature Min. (T Min.) 150°C S Temperature Typical (T Typ.) 175°C S Temperature Max. (T Max.) 200°C S Time (t ) 60 ~ 180 seconds S Ramp-up rate (T to T ) 3°C/second max. L p Time Maintained Above: --Temperature (T L)/Time (TL) 217°C/60 ~ 150 seconds Peak Temperature (T ) 250°C max. for 10 seconds p Target Peak Temperature (T Target) 250°C +0/-5°C p Time within 5°C of actual peak (t ) 20 ~ 40 seconds p Ramp-down Rate 6°C/second max. Tune 25°C to Peak Temperature (t) 8 minutes max. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica- tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.12.14 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 | fax 949-546-8001 | ww w .abrac on.c om