ULTRAVOLT® US SERIES MICRO-SIZED HIGH VOLTAGE POWER SUPPLIES Single-output micro-sized HV modules 3 Measuring only 5.75 cc (0.35 in ), the highly compact, micro-sized US series is specially designed to meet the needs of design engineers working with commercial, military, industrial, and medical applications. These modules allow access to voltages up to 500 V for customers with size-critical requirements. Features Typical Applications › Micro-sized: 5.75 cc › Small, lightweight, portable devices › Lightweight: 13 g › Fiber-optic telecom detectors › PCB flat mounting: 11 mm height › Particle physics detectors › 4 models from 0 to 200 V › Laser range finder detectors to 500 V › Thin-film bias › 100 mW output power › Avalanche photo diodes (APD) › Low ripple < 0.01% peak › Silicon photomultipliers (SiPM) to peak › Multi-pixel photon counter › Tight line/load regulation (MPPC) < ±0.01% › Ionization detectors › Low temperature coe‡cient < ±50 ppm per °C › Ultrasonic transducers › Small PZT drivers › Programmable HV output ±0.5% F.S. › ATE leakage testing › Output arc and short circuit › Bias supplies protection › 5, 9 or 12 VDC Input › Precision 2.5 V reference › TTL enable/disable/inhibit › Output voltage monitor › Metal case for low radiated noise › Optional flying lead for HV output PARAMETER SPECIFICATIONS UNITS 5 VDC ±0.5 or 12 to 15 ±0.5 VDC Input Voltage Vin Inhibition mode: < 5 at full output voltage, full load: mA Input Current < 65 (200 Vout) < 60 (300 Vout) < 55 (400 Vout) < 50 (500 Vout) mA Fixed positive or negative Polarity 0 to 200 0 to 300 0 to 400 0 to 500 VDC Output Voltage 500 330 250 200 µA Output Current Via external potentiometer, minimum resistance 10 kΩ or via external voltage source 0/2.5V ±0.5% - HV Setting at full scale, and input impedance > 1 MΩ ±0.01% of full output voltage for no load to full load - Load Voltage Regulation ±0.01% of full output voltage over specified input voltage range - Line Voltage Regulation < 0.01% pk to pk at full output voltage and current - Residual Ripple < 50 PPM/°C Temperature Coefficient 0/2.5 V signal - Output HV Monitoring Accuracy: ±0.2% F.S. Output impedance: 1 kΩ 2.5 V ±0.5%, TC: 50 ppm/°C, max output current: 1 mA - Output Reference Voltage ON: 0 V, connected to ground - HV Power ON/OFF OFF: not connected Open collector compatible -10 to +65, full load, max Eout, case temp. °C Operating Temperature -40 to +70 °C Storage Temperature Output current internally limited - Safeguards Soft start feature: the start is guaranteed with no overshoot Note: Drawing views: third angle projections. PHYSICAL SPECIFICATIONS Steel, tin-plated, thickness 0.5 mm (0.02") Construction Insulation: fully potted in RTV 3 5.750 cc (0351 in ) Volume 13 g (0.459 oz) Weight > 2 mm (0.078"), spacing 2.54 mm (0.1") Pin Length Coaxial cable (RG178), diameter 2 mm (0.079"), length 500 mm (19.685") Optional Lead CONNECTIONS ORDERING INFORMATION 0 to 200 VDC Output 0.2US Pin Function Type 0 to 300 VDC Output 0.3US POSITIVE POWER INPUT 1 0 to 400 VDC Output 0.4US POWER GROUND 2 0 to 500 VDC Output 0.5US REMOTE ADJUST INPUT 3 5 VDC Nominal 5 Input +2.5 VDC REFERENCE OUTPUT 4 12 VDC Nominal 12 ENABLE/DISABLE 5 W Output 0.1 Power EOUT MONITOR 6 Steel, Tin-plated Case (Standard) Case HV OUTPUT 7 Positive Output -P Polarity Mounting tabs must be connected to ground. Negative Output -N Output Voltage Lead Wire -WS Option Popular accessories ordered with this product include the PCB-CONN-US. Example: 0.5US5-P0.1-WS Voltage Option Type Model Power Input Polarity IEC-60950-1 Non-RoHS compliant units are available. Please contact the factory for more information. The US series is not available in all territories. Please contact Advanced Energy ford details concerning sales in your area. For international contact information, visit advanced-energy.com. ENG-HV-USSeries-230-G 5.16 Specifications are subject to change without notice. ©2016 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and UltraVolt® are U.S. trademarks of Advanced Energy Industries, Inc.