SINGLE OUTPUT HIGH VOLTAGE MODULES 6 A SERIES High Voltage Biasing Supply The A Series of high-voltage regulated DC-DC converters addresses the needs of the miniature PCB-mount regulated high voltage power supply user. Designed and built utilizing state-of-the-art power-conversion topology, these units feature surface-mount technology and encapsulation techniques that provide high reliability and performance. Typical applications for the A Series include the following: bias supplies, electrostatic detectors, mass spectrometry, and photomultiplier tubes (PMTs). • 8 models from 0 to 62V through 0 to 6kV • Indefinite output short-circuit protection • 4, 20 or 30 watts of output power • Output current monitor • Maximum Iout capability down to 0 Volts • Fixed-frequency, low-stored-energy design • Wide input voltage range • >430,000 hour MTBF @65°C ® • Available with Ripple Stripper Filter (-F Option) • UL/cUL Recognized Component; CE Mark (LVD & RoHS) PARAMETER CONDITIONS MODELS UNITS INPUT 12V 24V Voltage Range Full Power + 11 to 16 + 23 to 30 VDC Voltage Range Derated Power Range + 9 to 32 + 9 to 32 VDC Current Standby / Disable < 30 < 30 mA Current No Load, Max Eout < 100 < 90 mA Current Max Load, Max Eout ~ 400 ~ 1350 mA AC Ripple Current Nominal Input, Full Load < 80 < 80 mA p-p OUTPUT 1/16A 1/8A 1/4A 1/2A 1A 2A 4A 6A Voltage Range Nominal Input 0 to 62 0 to 125 0 to 250 0 to 500 0 to 1,000 0 to 2,000 0 to 4,000 0 to 6,000 VDC Nominal Input Voltage 12 24 24 12 24 24 12 24 24 12 24 24 12 24 24 12 24 24 12 24 24 12 24 24 VDC Power Nominal Input, Max Eout 4 20 30 4 20 30 4 20 30 4 20 30 4 20 30 4 20 30 4 20 30 4 20 30 Watts Current Iout Entire Output Voltage Range 64 320 480 32 160 240 16 80 120 8 40 60 4 20 30 2 10 15 1 5 7.5 0.67 3.3 5 mA Current Monitor Scaling Full Load 0.985 3.90 7.40 438.4 1860.5 2891.5 213.3 1000 1481.5 123.1 506.3 740.7 55.56 243.9 400 31.75 129.9 211.3 16.4 66.7 85.2 12.9 48.5 56.8 mA/V Voltage Monitor Scaling With -Y5 option 10:1 ± 2% into 10MΩ 100:1 ± 2% into 10MΩ - Ripple Full Load, Max Eout .02 .03 .05 .013 .015 .016 .01 .04 .048 .001 .02 .017 .038 .071 .15 .01 .05 .065 .019 .057 .022 .018 .073 .112 %V p-p Ripple with -F-M Option* Full Load, Max Eout, 300pF bypass Cap .002 .004 .006 .0048 .0056 .006 .0052 .0028 .005 .001 .0138 .0016 .001 .0008 .002 .0007 .0038 .004 .0004 .0088 .0026 .0003 .0012 .004 %V p-p Dynamic Load Regulation ½ to Full Load, Max Eout per .1mA <.12 <.12 <.12 <.12 <.12 <.12 <.20 <.20 <.20 <.50 <.50 <.50 <1.0 <1.0 <1.0 <2.0 <2.0 <2.0 <4.0 <4.0 <4.0 <6.0 <6.0 <6.0 V pk Line Regulation Nom. Input, Max Eout, Full Power < 0.01 % VDC Static Load Regulation No Load to Full Load, Max Eout < 0.01% VDC Stability 30 Min. warmup, per 8 hr/ per day < 0.01% / < 0.02% VDC PROGRAMMING & CONTROLS ALL TYPES Input Impedance Nominal Input + Output Models 1.1MΩ to GND, - Output Models 1.1MΩ to +5 Vref MΩ Adjust Resistance Typical Potentiometer Values 10K to 100K (Pot across Vref. & Signal GND, Wiper to Adjust) Ω Adjust Logic 0 to +5 for +Out, +5 to 0 for - Out +4.64 VDC for +Output or +0.36 for -Output = Nominal Eout - Output Voltage & Impedance T=+25°C + 5.00VDC ± 2%, Zout = 464Ω ± 1% - Enable/Disable 0 to +0.5 Disable, +2.4 to 32 Enable (Default = Enable) VDC ENVIRONMENTAL STANDARD -25PPM OPTION Operating Full Load, Max Eout, Case Temp. -40 to +65 +10 to +45 °C Coefficient Over the Specified Temperature PPM/°C ±50 +25 Thermal Shock Mil-Std 810, Method 503-4, Proc. II -40 to +65 °C Storage Non-Operating, Case Temp. -55 to +105 °C Humidity All Conditions, Standard Package 0 to 95% non-condensing - Altitude Standard Package, All Conditions Sea Level through Vacuum (Vacuum may require -P2 option, contact factory for details.) - Shock Mil-Std-810, Method 516.5, Proc. IV 20 (Standard), 40 (-C Option) G’s Vibration Mil-Std-810, Method 514.5, Fig.14.5C-3 10 (Standard), 20 (-C Option) G’s Specifications subject to change without notice. *Note: For additional information on the reduced ripple option, see -F Option datasheet. Higher Service, Higher Performance, Higher Reliability ® Making High Voltage Easier! ©2011, UltraVolt Inc. All rights reserved. ULTRAVOLT® Rev. AE 10/14 SINGLE OUTPUT HIGH VOLTAGE MODULES 7 A SERIES High Voltage Biasing Supply CONSTRUCTION STANDARD CASE Epoxy-filled DAP box certified to ASTM-D-5948 with -C Option: Aluminum Alloy 5052-H32, Finish: MIL-A-8625 Type II (Anodizing) SIZE ³ ³ Volume 4.30in (70.5cc), w/ -C Option: 8.00in (131.1cc) Weight 5.0oz (142g), w/ -C Option: 10.0oz (284g) TOLERANCE Overall ±0.050” (1.27) Pin to Pin ±0.015” (0.38) Mounting hole location ±0.025” (0.64) NOTES 20W and 30W versions are an additional 0.062” (1.57) in height. -M equipped units are an additional 0.030” (0.76) for each dimension. Contact UltraVolt’s Customer Service Department for drawings of models equipped with -E or -H options. WITH -C OPTION Downloadable drawings (complete with mounting & pin information) and 3D models are available online. IEC-60950-1 ORDERING INFORMATION 0 to 62 VDC Output 1/16A 0 to 125 VDC Output 1/8A 0 to 250 VDC Output 1/4A 0 to 500 VDC Output 1/2A Type 0 to 1,000 VDC Output 1A 0 to 2,000 VDC Output 2A 0 to 4,000 VDC Output 4A 0 to 6,000 VDC Output 6A 12VDC Nominal 12 Input 24VDC Nominal 24 Positive Output -P Non-RoHS compliant units are Polarity available. Please contact the Negative Output -N factory for more information. Watts Output (12 V Only) 4 Manufactured in USA Power Watts Output (24 V Only) 20 Watts Output (24 V Only) 30 CONNECTIONS Plastic Case - Diallyl Phthalate (Standard) PIN FUNCTION Case ‘Eared’ Chassis Mounting Plate -E 1 Input-Power Ground Return RF-Tight Aluminum Case -C 2 Positive Power Input Heat Sink .400” High (sized to fit case) -H 3 Iout Monitor ® Ripple Stripper Integral Output Filter* -F 4 Enable/Disable Shield Six-sided Mu-Metal Shield -M 5 Signal Ground Return Voltage Monitor Optional Eout Monitor -Y5 6 Remote Adjust Input Iout Monitor Boost Boosted Iout Monitor Signal Level -Y10 7 +5VDC Reference Output Temp. Coefficient 25PPM Temperature Coefficient -25PPM 8 HV Ground Return 5V Control and Monitors -I5 9 HV Ground Return or Eout Monitor (-Y5) Enhanced Interface 10V Control and Monitors (24Vin only) -I10 10 & 11 HV Output Flying Lead for HV Output -W Option All grounds joined internally. Power-supply mounting Shielded Flying Lead for HV Output -WS points isolated from internal grounds by >100kΩ, *Note: For additional information on the reduced ripple option, see -F .01uF / 50V (Max) on all models except -M (20W and Option datasheet. above), -M-E, -M-C, and -M-H configurations which Example: 1/2A12-P4-M are 0Ω. Voltage Option (Mu-Metal) Type Popular accessories ordered with this product include Model Power CONN-KIT and BR-1 mounting bracket kit. Input Polarity 1800 Ocean Avenue, Ronkonkoma, NY 11779 ® Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT®