Manufacturers
ADVANCED ENERGY 1/2C24-P250-I5-H
Description
DC TO HIGH POWER/REGULATED HIGH-VOLTAGE DC CONVERTER, CHASSIS-MOUNT, SINGLE OUTPUT
Part Number
1/2C24-P250-I5-H
Price
Request Quote
Manufacturer
ADVANCED ENERGY
Lead Time
Request Quote
Category
Capacitors » DC-DC Converter
Specifications
Manufacturer
Advanced Energy
Manufacturers Part #
1/2C24-P250-I5-H
Brand
UltraVolt
Series
High-Power C Series
Factory Pack Quantity
1
Dimensions
8.00 x 4.50 x 1.06"
Input Type
DC
Input Voltage Nominal
24 VDC
Mechanical Style
Non-Isolated / POL
Mounting
Chassis
Number of Outputs
1
Operating Temperature
- 40 to + 65°C
Output Amps 1
0.5 A
Output Voltage V1 Nominal
500 VDC
Package Type
Enclosed
Power
250 W
Subcategory
DC-DC Converter
Datasheet
Extracted Text
ULTRAVOLT® HIGH-POWER C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLY High voltage cap-charging supplies The high-power line of high voltage regulated DC- to-DC converters is an extension of the C series, directly addressing the high power density needs of > 30 W applications. High-power C units provide up to 60/125/250 W. This high power density is especially suited to high-energy systems with large capacitances, fast repetition rates, or high continuous-DC-power requirements. › Seven models from 0 to 125 V through 0 to 6 kV › 60, 125, or 250 W of output power › Maximum Iout capability down to 0 V › Maximum Iout during charge/rise time › Output short-circuit protection › Very fast rise with very low overshoot › High efficiency › High power-to-voltage density › Very low profile › Output current and voltage monitors › > 200,000 hour MTBF at 65°C (149°F) Typical Applications › Fixed-frequency, low-stored-energy design › UL/CUL recognized component; › Laser CE Mark (LVD and RoHS) › Cap charging › Pulsed power › Pulse generation › Test equipment PARAMETER CONDITIONS UNITS Input All Types Full Power +23 to 30 VDC Voltage Range Derated Power Range +11 to 32 VDC Voltage Range Standby/Disable < 40 mA Current Max Load, Max Eout 60 W: 3; 125 W: 6; 250 W: 12 A Current No Load, Max Eout 1/8C to 1C: < 300; 2C to 6C: < 500 mA Current Output 1/8C 1/4C 1/2C 1C 2C 4C 6C Nominal Input 0 to 125 0 to 250 0 to 500 0 to 1000 0 to 2000 0 to 4000 0 to 6000 VDC Voltage Range Nominal Input, Max Eout 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 Watts Power Iout, Entire Output Voltage Range 480 1000 2000 240 500 1000 120 250 500 60 125 250 30 62 125 15 31 62 10 21 42 mA Current Full Load 400 833 1667 200 417 833 109 208 417 50 114 227 26 52 104 11.5 26 52 6.2 17.7 35 mA/V Current Scale Factor 100:1 ±2% into 10 MΩ - Voltage Monitor Scaling Full Load, Max Eout, Cload ≥ 0.5 μF < 1.0 %V p to p Ripple C Load, 0 Eout to Full Eout < 1 %V pk Overshoot Max Iout, Various C Loads and Eout Figure A (below) - Rise Time Internal 0.90 0.90 1.80 0.90 0.90 1.80 0.43 0.43 0.85 0.019 0.019 0.038 0.019 0.019 0.038 0.013 0.013 0.026 0.013 0.013 0.026 μF Storage Capacitance Nom. Input, Max Eout, Full Power < 0.01% VDC Line Regulation No Load to Full Load, Max Eout < 0.01% VDC Static Load Regulation 30 Min Warmup, Per 8 hr/Per Day < 0.01%/< 0.02% VDC Stability Programming and controls All Types Nominal Input +output models 1.1 MΩ to GND; -output models 1.1 MΩ to +5 Vref M Input Impedance Typical Potentiometer Values 10 to 100 K (pot. across Vref. and signal GND, wiper to adjust) Adjust Resistance 0 to +5 for +Out, +5 to 0 for - Out +4.64 VDC for +output or +0.36 for -output = nominal Eout - Adjust Logic T=+25°C +5.00 VDC ±2%; Zout = 464 Ω ± 1% - Output Voltage & Impedance 0 to +0.5 disable; +2.4 to 32 enable (default: enable) VDC Enable/Disable (ON/OFF) Environmental All Types Full Load, Max Eout, Case Temp. -40 to +65 (-40 to +149) °C (°F) Operating Over the Specified Temperature ±50 (±25 optional) PPM/°C Coefficient Mil-Std 810, Method 503-4, Proc. II -40 to +65 (-40 to +149) °C (°F) Thermal Shock Non-Operating, Case Temp. -55 to +105 (-67 to +221) °C (°F) Storage All Conditions, Standard Package 0 to 95%, non-condensing - Humidity Standard Package, All Conditions Sea level through 21,336 m (70,000') - Altitude Mil-Std-810, Method 516.5, Proc. IV 20 Gs Shock Mil-Std-810, Method 514.5, Fig.514.5C-3 10 Gs Vibration Figure A. Rise time formulas C = μF C = μF C = μF C = μF 2 V = Volts CxV V = kV V = kV I E² = kV CxE T= I = C x V x F F= J= I = mA I = mA I = mA J = Ws I CxV 2 T = mS F = Hz F = Hz Note: Capacitance must include HVPS internal capacitance. PARAMETER CONDITIONS UNITS Input All Types Full Power +23 to 30 VDC Voltage Range Derated Power Range +11 to 32 VDC Voltage Range Standby/Disable < 40 mA Current Max Load, Max Eout 60 W: 3; 125 W: 6; 250 W: 12 A Current No Load, Max Eout 1/8C to 1C: < 300; 2C to 6C: < 500 mA Current Output 1/8C 1/4C 1/2C 1C 2C 4C 6C Nominal Input 0 to 125 0 to 250 0 to 500 0 to 1000 0 to 2000 0 to 4000 0 to 6000 VDC Voltage Range Nominal Input, Max Eout 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 Watts Power Iout, Entire Output Voltage Range 480 1000 2000 240 500 1000 120 250 500 60 125 250 30 62 125 15 31 62 10 21 42 mA Current Full Load 400 833 1667 200 417 833 109 208 417 50 114 227 26 52 104 11.5 26 52 6.2 17.7 35 mA/V Current Scale Factor 100:1 ±2% into 10 MΩ - Voltage Monitor Scaling Full Load, Max Eout, Cload ≥ 0.5 μF < 1.0 %V p to p Ripple C Load, 0 Eout to Full Eout < 1 %V pk Overshoot Max Iout, Various C Loads and Eout Figure A (below) - Rise Time Internal 0.90 0.90 1.80 0.90 0.90 1.80 0.43 0.43 0.85 0.019 0.019 0.038 0.019 0.019 0.038 0.013 0.013 0.026 0.013 0.013 0.026 μF Storage Capacitance Nom. Input, Max Eout, Full Power < 0.01% VDC Line Regulation No Load to Full Load, Max Eout < 0.01% VDC Static Load Regulation 30 Min Warmup, Per 8 hr/Per Day < 0.01%/< 0.02% VDC Stability Programming and controls All Types Nominal Input +output models 1.1 MΩ to GND; -output models 1.1 MΩ to +5 Vref M Input Impedance Typical Potentiometer Values 10 to 100 K (pot. across Vref. and signal GND, wiper to adjust) Adjust Resistance 0 to +5 for +Out, +5 to 0 for - Out +4.64 VDC for +output or +0.36 for -output = nominal Eout - Adjust Logic T=+25°C +5.00 VDC ±2%; Zout = 464 Ω ± 1% - Output Voltage & Impedance 0 to +0.5 disable; +2.4 to 32 enable (default: enable) VDC Enable/Disable (ON/OFF) Environmental All Types Full Load, Max Eout, Case Temp. -40 to +65 (-40 to +149) °C (°F) Operating Over the Specified Temperature ±50 (±25 optional) PPM/°C Coefficient Mil-Std 810, Method 503-4, Proc. II -40 to +65 (-40 to +149) °C (°F) Thermal Shock Non-Operating, Case Temp. -55 to +105 (-67 to +221) °C (°F) Storage All Conditions, Standard Package 0 to 95%, non-condensing - Humidity Standard Package, All Conditions Sea level through 21,336 m (70,000') - Altitude Mil-Std-810, Method 516.5, Proc. IV 20 Gs Shock Mil-Std-810, Method 514.5, Fig.514.5C-3 10 Gs Vibration Figure A. Rise time formulas 2.320 60 W/125 W 250 W PHYSICAL SPECIFICATIONS RTV-silicone filled aluminum box (epoxy optional) Construction Chem film per MIL-A-8625 type II (anodizing) Size 317 cc (19.35 in³) Volume 60 W/125 W 634 cc (38.7 in³) 250 W 0.64 kg (1.4 lb) Weight 60 W/125 W 1.18 kg (2.6 lb) 250 W Note: For detailed outline drawings and 3D STEP files, please visit www.advanced-energy.com/en/High_Voltage.html. CONNECTIONS HIGH-POWER PIN CONNECTIONS (250 W UNITS) Pin Function Pin Function Input power ground return N/C 1 & 8 2, 9, & 10 Positive power input Positive Power Input 2 & 9 19 & 20 Iout monitor Input Power Ground Return 3 21 & 22 Enable/disable 4 Signal ground return 5 Remote adjust input 6 +5 VDC reference output 7 N/C 10, 11, 12, & 13 Eout monitor 14 HV ground return 15 & 16 HV output 17 & 18 All grounds joined internally. Power-supply mounting points isolated from internal grounds by > 100 kΩ, 0.01 μF/50 V (max). Non-RoHS compliant units are available. Please contact the factory for more information. IEC-60950-1 ORDERING INFORMATION 0 to 125 VDC Output 1/8C Type 0 to 250 VDC Output 1/4C 0 to 500 VDC Output 1/2C 0 to 1000 VDC Output 1C 0 to 2000 VDC Output 2C 0 to 4000 VDC Output 4C 0 to 6000 VDC Output 6C 24 VDC Nominal 24 Input Positive Output -P Polarity Negative Output -N 60 W Output 60 Power 125 W Output 125 250 W Output 250 1.02 cm (0.400") high (sized to fit case) -H Heat Sink (5 or 7) 0.47 cm (0.187") standoffs on top cover -Z11 PCB Support 5 V Control and Monitors -I5 Enhanced Interface 10 V Control and Monitors -I10 25 PPM Temperature Coefficient -25PPM Options Popular accessories ordered with this product include CONN-KIT-HP250, CONN-KIT-HP, and the BR-7 and BR-8 mounting bracket kits. Note: For more information on the enhanced interface options, download the I5/I10 option datasheet. Example: 1/2C24-P125-H (Heat Sink) Voltage Option Type Model Power Input Polarity For international contact information, visit advanced-energy.com. ENG-HV-HPCSeries-230-AA 2.16 Specifications are subject to change without notice. ©2016 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and UltraVolt® are U.S. trademarks of Advanced Energy Industries, Inc.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 1/2C24-P250-I5-H?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Ultra-small DC to Regulated DC Converter to 100V, Low-current, PCB-Mount Module, Single Output
Ultra-small DC to Regulated DC Converter to 100V, Low-current, PCB-Mount Module, Single Output
EXTRA-SMALL DC TO REGULATED HIGH-VOLTAGE DC CONVERTER, PCB-MOUNT MODULE, SINGLE OUTPUT
EXTRA-SMALL DC TO REGULATED HIGH-VOLTAGE DC CONVERTER, PCB-MOUNT MODULE, SINGLE OUTPUT
0.1 W, 11.5 -15.5 VDC Vin, Single Output, 200 VDC@0.0005 A Industrial DC-DC Converter
EXTRA-SMALL DC TO REGULATED HIGH-VOLTAGE DC CONVERTER, PCB-MOUNT MODULE, SINGLE OUTPUT
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods