ULTRAVOLT® BIPOLAR HIGH POWER C SERIES DUAL-OUTPUT HIGH VOLTAGE POWER SUPPLIES DC-to-HVDC dual-output high voltage cap- charging modules Page 2 The bipolar C series line of regulated DC-to-DC high voltage converters is an extension of the high power C series. Bipolar C series units contain a pair of + and - standard-product, 60 or 125 W high power C series assemblies, providing a total of 125 or 250 W. By encapsulating a module pair within one case, the cost of testing, potting, burn-in, and system integration is reduced. The ± HV output pair is packaged in UltraVolt’s 11.4 cm x 20.3 cm x 2.8 cm (4.5" x 8" x 1.1") standard case. This high power density is especially suited to high-energy pulsers, amplifiers, and discharge devices with large capacitance, fast repetition rates, or high current loads. Features Typical Applications › 125 or 250 W total › Fast T with very low overshoot › Cap-charging rise output power › High power to voltage density › Pulsed power › Dual, independently › > 200,000 h MTBF at 65°C › Ultrasound controlled outputs › Output short circuit protection › Amplifiers › Output current and voltage monitors › Fixed-frequency, low stored › Pulse generators energy design › Lasers › High efficiency › UL/cUL recognized component; › Electro-optics › Maximum Iout capability CE mark (LVD and RoHS) down to 0 V › HV pulse generator bias › Low profile › HV amplifier bias Page 3 PARAMETER CONDITIONS UNITS Input All Types Full Power +23 to 30 VDC Voltage Range Derated Power +11 to 32 VDC Voltage Range Range Standby/Disable < 40 mA Current Max Load, Max 125 W: 3, 250 W: 6 A Current Eout Current No Load, Max 1/8C to 1C: < 600 mA Eout 2C to 6C: < 1000 Nominal Input, < 50 mA AC Ripple Full Load pk to pk Current Output 1/8C 1/4C 1/2C 1C 2C 4C 6C Nominal Input 0 to ±125 0 to ±250 0 to ±500 0 to ±1000 0 to ±2000 0 to ±4000 0 to ±6000 VDC Voltage Range Nominal Input, 125 250 125 250 125 250 125 250 125 250 125 250 125 250 W Power Max Eout Iout, Entire 1000 2000 500 1000 250 500 125 250 62 125 31 62 21 42 mA Current Output Voltage Range Current Scale Full Load 833 1667 417 833 208 417 114 227 52 104 26 52 17.7 35 mA/V Factor Voltage 100:1 ±2% into 10 MΩ - Monitor Scaling Full Load, Max < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 V Ripple Eout, Cload pk to pk ≥ 0.5 uF Max Iout, Figure A - Rise Time Various C Loads and Eout Internal 0.90 0.90 0.90 0.90 0.43 0.43 0.019 0.019 0.019 0.019 0.013 0.013 0.013 0.013 uF Storage Capacitance C Load, 0 Eout < 1 V < 1 V < 1 V < 1 V < 1 V < 1 V < 1 V V pk Overshoot to Full Eout Nominal Input, < 0.01% VDC Line Max Eout, Full Regulation Power Static Load No Load to Full < 0.01% VDC Load, Max Eout Regulation 30 Min Warmup, < 0.01%/< 0.02% VDC Stability Per 8 h, Per Day Environmental All Types Nominal Input +Output models 1.1 MΩ to ground, -output models 1.1 MΩ to +5 vRef. MΩ Input Impedance Typical 10 to 100 K (potentiometer across vRef. and signal ground, wiper to adjust) Ω Adjust Potentiometer Resistance Values 0 to +5 for +Out, +4.64 VDC for +output or +0.36 for -output = nominal Eout - Adjust Logic +5 to 0 for - Out T = +25°C +5.00 VDC ± 2%, Zout = 464 Ω ±1% - Output Voltage and Impedance 0 to +0.5 disable, +2.4 to 32 enable (default = enable) - Enable/ disable Page 4 PARAMETER CONDITIONS UNITS Temperature and Humidity All Types Full Load, Max -40 to +65 °C Operating Eout, Case Temperature Over the ±50 PPM/°C Coefficient Specified Temperature Mil-Std 810, -40 to +65 °C Thermal Method 503-4, Shock Proc. II Storage Non-Operating, -55 to +105 °C Case Temperature All Conditions, 0 to 95% non-condensing - Humidity Standard Package Standard Sea level through vacuum (vacuum may require -P2 option, contact factory for details) - Altitude Package, All Conditions Mil-Std-810, 20 Gs Shock Method 516.5, Proc. IV Mil-Std-810, 10 Gs Vibration Method 514.5, Fig.514.5C-3 C = uF C = uF C = uF C = uF 2 C x V I C x E V = Volts V = kV V = kV T = I = C x V x F F = E² = kV J = I = mA I = mA I = mA I CxV 2 J = Ws T = mS F = Hz F = Hz Figure A - Rise time formulas Note: Capacitance must include HVPS internal capacitance. Page 5 STANDARD CASE PHYSICAL SPECIFICATIONS Epoxy-filled aluminum box Construction Chem film per MIL-A-8625 Type II (anodizing) 634 cc (38.7in³) Volume 1.1 kg (2.45 lb) Weight Tolerance ±0.64 mm (0.025") Overall Pin to Pin ±0.38 mm (0.015”) ±0.64 mm (0.025”) Hole to Hole Location Page 6 +HVPS CONNECTIONS ORDERING INFORMATION INPUT POWER GROUND 1 and 8 Type 0 to 125 VDC Output 1/8C RETURN 0 to 250 VDC Output 1/4C IOUT MONITOR 3 0 to 500 VDC Output 1/2C ENABLE/DISABLE 4 0 to 1000 VDC Output 1C 5 SIGNAL GROUND 0 to 2000 VDC Output 2C RETURN 0 to 4000 VDC Output 4C 6 REMOTE ADJUST INPUT 0 to 6000 VDC Output 6C +5 VDC REFERENCE 7 OUTPUT 24 VDC Nominal 24 Input POSITIVE POWER INPUT 2, 9, and 10 Negative and Positive Output -NP Polarity N/C 11, 12, and 13 Power 125 W Output 125 (60Wx2) EOUT MONITOR 14 250 W Output 250 (125Wx2) HV GROUND RETURN 15 and 16 10.16 mm (0.400”) High (sized -H Heat Sink to fit case) 17 and 18 HV OUTPUT (7) 4.75 mm (0.187") -Z11 PCB Support All grounds joined internally. Power supply Standoffs on Top Cover mounting points isolated from internal grounds by > 100 kW, 0.01 uF/50 V (max). Example: 1/2C24-NP125(60Wx2) -HVPS CONNECTIONS Voltage Total Output Power INPUT POWER GROUND 1 and 8 Type RETURN Model IOUT MONITOR 3 Input Polarity 4 ENABLE/DISABLE Popular accessories ordered with this product include CONN-KIT-HP, and BR-7 and BR-8 SIGNAL GROUND 5 mounting bracket kits. RETURN REMOTE ADJUST INPUT 6 +5 VDC REFERENCE 7 OUTPUT POSITIVE POWER INPUT 2, 9, and 10 N/C 11, 12, and 13 EOUT MONITOR 14 15 and 16 HV GROUND RETURN HV OUTPUT 17 and 18 All grounds joined internally. Power supply mounting points isolated from internal grounds by > 100 kW, 0.01 uF/50 V (max). IEC-60950-1 Non-RoHS compliant units are available. Please contact the factory for more information. Page 7 For international contact information, visit advanced-energy.com. ENG-HV-BiPolarC-230-A 10.16 Specifications are subject to change without notice. ©2016 Advanced Energy Industries, Inc. Advanced Energy®, AE®, and UltraVolt® are U.S. trademarks of Advanced Energy Industries, Inc.