ULTRAVOLT® C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLIES DC-to-HVDC single-output high voltage cap- charging modules The C series of high voltage regulated DC-to-DC converters are designed for fast rise time/charging applications utilizing state-of-the-art power conversion topology. This high power density module is especially suited to high-energy pulsers, amplifiers, and discharge devices with large capacitance, fast repetition rates, or high current loads. Surface-mount technology and encapsulation techniques provide high reliability and low cost. Features Typical Applications › 7 models from 0 to 125 V › Cap-charging through 0 to 6 kV › Pulsed power › 20 or 30 W output power › Test equipment › Maximum Iout capability down › Mass spectrometry to 0 V › Automated test equipment › Maximum Iout during (ATE) charge/rise time › Lasers and electro-optics › Indefinite output short circuit › HV pulse generator bias protection › HV amplifier bias › Very fast rise with very low overshoot › Output voltage and current monitors › > 400,000 h MTBF at 65°C › Fixed-frequency, low-stored-energy design › UL/cUL recognized component; CE Mark (LVD and RoHS) Note: See Application Note 10 for more charging information. PARAMETER CONDITIONS MODELS UNITS Input All Types Voltage Range Full Power +23 to 30 VDC Voltage Range Derated Power Range +9 to 32 VDC Current Standby/Disable < 30 mA Current No Load, Max Eout < 90 mA Current Max Load, Max Eout 20 W: 950, 30 W: 1425 mA AC Ripple Current Nominal Input, Full Load < 80 mA pk to pk Output 1/8C 1/4C 1/2C Voltage Range Nominal Input 0 to 125 0 to 250 0 to 500 VDC Power Nominal Input, Max Eout 20 30 20 30 20 30 W Current Iout, Entire Output Voltage Range 160 240 80 120 40 60 mA Current Scale Factor Full Load 2540 4210 1096 2000 1142 1667 mA/V Voltage Monitor Scaling 100:1 ±2% into 10 MΩ Ripple Full Load, Max Eout, Cload ≥ 0.5 uF < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 V pk to pk Overshoot C Load, 0 Eout to Full Eout < 1.0 < 1.0 < 1.0 < 1.0 < 2.0 < 2.0 V pk Rise Time Max Iout, Various C Loads and Eout Figure A - Storage Capacitance Internal 0.50 0.50 0.15 0.15 0.16 0.16 uF Line Regulation Nominal Input, Max Eout, Full < 0.01 % VDC Power Static Load Regulation No Load to Full Load, Max Eout < 0.01% VDC Stability 30 Min Warmup, Per 8 h, Per Day < 0.01%/< 0.02% VDC Programming And Controls All Types Input Impedance Nominal Input +Output models 1.1 MΩ to ground, -output models 1.1 MΩ to +5 vRef. MΩ Adjust Resistance Typical Potentiometer Values 10 to 100 K (potentiometer across vRef. and signal ground, wiper to adjust) Ω Adjust Logic 0 to +5 for +Out, +5 to 0 for -Out +4.64 VDC for +output or +0.36 for -output = nominal Eout - Output Voltage T = +25°C +5.00 VDC ±2%, Zout = 464 Ω ±1% - and Impedance Enable/Disable 0 to +0.5 disable, +2.4 to 32 enable (default = enable) VDC Environmental Standard Operating Full Load, Max Eout, Case Temp. -40 to +65 °C Coefficient Over The Specified Temperature ±50 PPM/°C Thermal Shock Mil-Std 810, Method 503-4, Proc. II -40 to +65 °C Storage Non-operating, Case Temp. -55 to +105 °C Humidity All Conditions, Standard Package 0 to 95% non-condensing - Altitude All Conditions, Standard Package Sea level through vacuum (vacuum may require -P2 option, contact factory - for details) Shock Mil-Std-810, Method 516.5, Proc. IV 20 (standard), 40 (-C option) Gs Vibration Mil-Std-810, Method 514.5, 10 (standard), 20 (-C option) Gs Fig.514.5C-3 C = uF C = uF C = uF C = uF 2 C x V I C x E V = Volts V = kV V = kV T = I = C x V x F F = E² = kV J = I = mA I = mA I = mA I CxV 2 J = Ws T = mS F = Hz F = Hz Figure A - Rise time formulas Note: Capacitance must include HVPS internal capacitance. PARAMETER UNITS Input Voltage Range VDC Voltage Range VDC Current mA Current mA Current mA AC Ripple Current mA pk to pk Output 1C 2C 4C 6C Voltage Range 0 to 1000 0 to 2000 0 to 4000 0 to 6000 VDC Power 20 30 20 30 20 30 20 30 W Current 20 30 10 15 5 7.5 3.3 5 mA Current Scale Factor 307 476 159 259 94 112 51 86 mA/V Voltage Monitor Scaling - Ripple < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 V pk to pk Overshoot < 2.0 < 2.0 < 2.0 < 2.0 < 4.0 < 4.0 < 6.0 < 6.0 V pk Rise Time - Storage Capacitance 0.033 0.018 0.009 0.009 0.010 0.010 0.0064 0.0064 uF Line Regulation VDC Static Load Regulation VDC Stability VDC Programming And Controls Input Impedance MΩ Adjust Resistance Ω Adjust Logic - Output Voltage - and Impedance Enable/Disable VDC Environmental -25 PPM Option Operating +10 to +45 °C Coefficient ±25 PPM/°C Thermal Shock °C Storage °C Humidity - Altitude - Shock Gs Vibration Gs Upta quam: nonsectem aut vella et facerovit, undipsunt pel ipsa quidenimusam labore nit quas eici conet modite quae porio dis preritenihil et plique di aligendi omnia sunt maionse quature rumquaera aliqui odit. Note: Downloadable drawings (complete with mounting and pin information) and 3D models are available online. PHYSICAL SPECIFICATIONS Epoxy-filled DAP box certified to ASTM-D-5948 with -C option, aluminum box, Construction chem film per MIL-A-8625 Type II (anodizing) 70.5 cc (4.30 in³), with -C option: 131.1 cc (8.00 in³) Volume 142 g (5.0 oz), with -C Option: 284 g (10.0 oz) Weight Overall 1.27 mm (±0.050"), pin to pin 0.38 mm (±0.015"), mounting hole location 0.64 (±0.025") Tolerance (plastic case) Overall 0.64 mm (±0.025"), pin to pin 0.38 mm (±0.015"), hole to hole location 0.64 mm (±0.025") (metal case) Notes: 20 and 30 W versions are an additional 157 mm (0.062") in height. -M equipped units are an additional 0.76 mm (0.030") for each dimension. Contact Advanced Energy for drawings of models equipped with -E or -H options. CONNECTIONS ORDERING INFORMATION 0 to 125 VDC Main Output 1/8C Pin Function Type INPUT POWER GROUND 0 to 250 VDC Main Output 1/4C 1 RETURN 0 to 500 VDC Main Output 1/2C POSITIVE POWER INPUT 2 0 to 1,000 VDC Main Output 1C IOUT MONITOR 3 0 to 2000 VDC Main Output 2C ENABLE/DISABLE 4 0 to 4000 VDC Main Output 4C SIGNAL GROUND RETURN 5 0 to 6000 VDC Main Output 6C REMOTE ADJUST INPUT 24 VDC Nominal (20 and 30 W) 24 6 Input Positive Output -P +5 VDC REFERENCE OUTPUT Polarity 7 Negative Output -N HV GROUND RETURN 8 W Output 20 Power EOUT MONITOR 9 W Output 30 HV OUTPUT 10 and 11 Plastic Case - Diallyl Phthalate (Standard) Case All grounds joined internally. Power supply mounting points isolated from internal ‘Eared’ Heatsink Plate (Plastic Case) -E grounds by > 100 kΩ, 0.01 uF/50 V (max) RF-Tight Aluminum Case -C on all models except -M, -M-C, -M-E, and -M-H configurations which are 0 Ω. 0.400" High (Sized-to-Fit Case) -H Heatsink Six-sided Mu-Metal Shield -M Shield 25 PPM Temperature Coefficient -25 PPM Temp. Coefficient Contact the factory for boosted current monitor options. Example: 1/2C24-P20-C Voltage Option Type Model Power Input Polarity Popular accessories ordered with this product include CONN-KIT and BR-1 mounting bracket kit. IEC-60950-1 Non-RoHS compliant units are available. Please contact the factory for more information. Upta quam: nonsectem aut vella et facerovit, undipsunt pel ipsa quidenimusam labore nit quas eici conet modite quae porio dis preritenihil et plique di aligendi omnia sunt maionse quature rumquaera aliqui odit. For international contact information, visit advanced-energy.com. ENG-HV-CSeries-230-A 10.16 Specifications are subject to change without notice. ©2016 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and UltraVolt®, are U.S. trademarks of Advanced Energy Industries, Inc.