ISOLATED LOW VOLTAGE POWER SUPPLIES 61 FL SERIES Floating Hot Deck LVPS With Isolated Digital and Analog I/O The FL Series of floating-hot-deck, low-voltage power supplies offers an integrated solution for systems requiring LV power & controls with high-voltage isolation. Combining a highly isolated, DC-to-DC, multi-output low-voltage power supply (LVPS) with an advanced isolated digital & analog I/O topology, the FL sub-system provides both power and controls to floating-hot-deck circuitry. This solution, when combined with one or more UV HVPS or other circuitry, can provide high-performance solutions for applications such as: • Isolated up to 15kV Floating/Stacked Ion or E-Beam Biases Floating Filament Bias • DC leakage current of <10nA Floating Pulsers & Gated Grids Floating Capacitance Meters • AC leakage capacitance of <40pF Floating High Side Current Monitors Floating Leakage Testers • 3 regulated floating LV power outputs • Isolated digital I/O to and from floating hot deck Please contact UltraVolt's customer service department for an • Isolated analog I/O to and from floating hot deck analysis of your requirements. • UL/cUL Recognized Component; CE Mark (LVD & RoHS) Specifications subject to change without notice. Higher Service, Higher Performance, Higher Reliability ® Making High Voltage Easier! ©2011, UltraVolt Inc. All rights reserved. ULTRAVOLT® ISOLATED LOW VOLTAGE POWER SUPPLIES 62 FL SERIES Floating Hot Deck LVPS With Isolated Digital and Analog I/O PARAMETER CONDITIONS MODELS UNITS INPUT POWER: 12V MODELS 24V MODELS Voltage Range Full Power +12 ± 5% +24 ± 5% VDC Voltage Range Derated Power Range +10.8 to +16 +21.6 to +30 VDC Current Standby ( Disabled ) < 90 < 50 mA Current No Load < 0.15 < 0.15 A Current Max Load < 1.60 < 1.40 A AC Ripple Current Nominal Input, Full Load < 80 < 100 mA p-p LOCAL CONTROLS: REFERENCE ALL TYPES Output Voltage T = +25°C, Initial value +5.1 ± 1% VDC Output Impedance T = +25°C 464 ± 1% Ω Stability Over full temperature range 0.2 mV/°C LOCAL CONTROLS: LVPS ENABLE / DISABLE ALL TYPES Power supply on Open, or a voltage above TTL high +2.4 to 32 VDC Power supply off Grounded, or a voltage below TTL low 0 to + 0.7 ± 0.2 (Isink 1mA minimum) VDC INPUT / OUTPUT ISOLATION: 12V MODELS 24V MODELS Isolation Voltage Continuous 15 15 kV Leakage Current All inputs to all outputs < 10 std, < 100 “-E” < 10 std, < 100 “-E” nA Leakage Capacitance All inputs to all outputs < 40 std, < 50 “-E” < 50 std or “-E” pF ISOLATED POWER OUTPUTS: 15FL12-12W 15FL24-24W Output #1 Power Nominal input, max Iout 12 24 W Output #1 Voltage Nominal input voltage range +12 ± 2% +24 ± 2% VDC Output #1 Current Minimum to Maximum 0 to 1 0 to 1 A Output #1 Line Regulation Nominal input range, full load < 0.1% < 0.1% VDC Output #1 Load Regulation No load to full load < 0.1% < 0.1% VDC Output #1 Ripple Full load < 2% < 1% V p-p Output #2 Voltage Nominal input voltage range -15 ± 1 -15 ± 1 VDC Output #2 Current Minimum > Maximum 0 to 10 0 to 10 mA Output #2 Line Regulation Nominal input range, full load < 0.1% < 0.1% VDC Output #2 Load Regulation No load to full load < 2% < 2% VDC Output #2 Ripple Full load < 2% < 2% V p-p Output #3 Voltage Nominal input voltage range +5.6 ± 6% +5.6 ± 6% VDC Output #3 Current Minimum > Maximum 0 to 10 0 to 10 mA Output #3 Line Regulation Nominal input range, full load < 1 % < 1 % VDC Output #3 Load Regulation No load to full load < 1 % < 1 % VDC Output #3 Ripple Full load < 1 % < 1 % V p-p ISOLATED CONTROLS: TTL CHANNEL “UP” ALL TYPES WITH “-I/O” OPTION 10MΩ internal pull up to +15V Local input Source voltage, sink current VDC <1V low, >2.5V high Open collector with internal 1kΩ pull up to +5V Isolated output Inverted & buffered TTL VDC Can sink 10mA max Baud Rate Varying duty cycle DC to >300 kHz ISOLATED CONTROLS: ANALOG CHANNEL “UP” ALL TYPES WITH “-I/O” OPTION Local input voltage Range 0 to + 5 VDC Local input impedance 10 Meg Ω Isolated output voltage Range 0 to + 5 VDC Isolated output impedance Buffered low impedance - Initial offset error < ± 1% mV Gain error Full scale < ± 2% VDC Linearity error 0 to full scale < ± 1% VDC Stability 30 min. warm-up, per 8 hrs / per day < 0.01% / < 0.02% VDC Temperature Coefficient 0 to +55°C < ± 50 ppm/°C Bandwidth Symmetric or asymmetric signal DC to 30 (-3dB point is 47 Hz) Hz 1800 Ocean Avenue, Ronkonkoma, NY 11779 ® Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT® ISOLATED LOW VOLTAGE POWER SUPPLIES 63 FL SERIES Floating Hot Deck LVPS With Isolated Digital and Analog I/O ‘-RB’ ISOLATED CONTROLS: TTL CHANNEL “DOWN” PARAMETER CONDITIONS ALL TYPES WITH “-I/O-R/B” OPTION UNITS 10MΩ internal pull up to +15V Isolated ‘Hot Deck’ Input Source voltage, sink current VDC <1V low, >2.5V high Open collector with internal 1kΩ pull up to +5V Local output Inverted & Buffered TTL VDC Can sink 10mA max Bandwidth Varying duty cycle DC to >300 kHz ISOLATED CONTROLS: ANALOG CHANNELS #1 & #2 “DOWN” PARAMETER CONDITIONS ALL TYPES WITH “-I/O-R/B” OPTION UNITS Isolated ‘Hot Deck’ +Input Range 0 to +5, 0 to +10 with >+15VDC input power VDC Isolated ‘Hot Deck’ -Input Range 0 to –5, 0 to -10 with >+15VDC input power VDC Isolated ‘Hot Deck’ + or - Signal source > 10 Meg Ω Input impedance Local output +voltage Range 0 to +5, 0 to +10 with >+15VDC input power VDC Local output -voltage Range 0 to –5, 0 to -10 with >+15VDC input power VDC Local output impedance Signal source Buffered low impedance Ω Initial offset error Signal source < ± 5 mVDC Gain error Full scale < ± 1% VDC Linearity error 0 to full scale < ± 1% VDC Stability 30 min. warm-up, per 8 hrs / per day < 0.01% / < 0.02% VDC Temperature Coefficient -20 °C to +55 °C < ± 50 ppm/°C Bandwidth Symmetric or asymmetric signal DC to 30 (-3dB point is 47Hz) Hz TEMPERATURE: CONDITIONS ALL TYPES Operating Full load, case measurement -20 to +55 °C Storage Non-operating, case measurement -55 to +85 °C Thermal shock Mil-Std-810, Method 503-4, Proc. II -20 to +55 °C ALTITUDE: ALL TYPES Sea level to Vacuum Operating All operating conditions Sea level to Vacuum Storage Non-operating SHOCK & VIBRATION: STANDARD - R/B OPTION Shock Mil-Std-810, Method 516.5, Proc IV 20 20 G’s Vibration Mil-Std-810, Method 514.5, Fig. 514.5C-3 10 10 G’s ® 1800 Ocean Avenue, Ronkonkoma, NY 11779 Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT® Rev. Q 10/14 ISOLATED LOW VOLTAGE POWER SUPPLIES 64 FL SERIES Floating Hot Deck LVPS With Isolated Digital and Analog I/O CONSTRUCTION Epoxy-filled DAP box certified to ASTM-D-5948 SIZE STANDARD Downloadable drawings Volume: Standard: 10 in³ (163.9cc) (complete with mounting -R/B Option: 11.1 in³ (182cc) & pin information) and 3D Weight: Standard: 12.0 oz (340.2g) models are available online. -R/B Option: 13.3 oz (377.1g) TOLERANCE Overall ±0.050” (1.27) Pin to Pin ±0.015” (0.38) Mounting hole locations ±0.025” (0.64) NOTES 24-watt versions are an additional 0.062” (1.57) in height. -M equipped units are an additional 0.030” (0.76) in height. Contact UV Customer Service for drawings of models equipped with -E options. WITH -RB OPTION IEC-60950-1 Non-RoHS compliant units are available. Please contact the factory for more information. LOCAL CONNECTIONS ISOLATED/FLOATING CONNECTIONS PIN FUNCTION PIN FUNCTION 1 Input Power Ground Return 8 Floating PWR Ground Return 2 Positive Power Input 9 Floating +12VDC or +24VDC Output 3 LVPS Enable/Disable Input 10 Floating -15VDC Output 4 TTL Up/HVPS Enable/Disable (-I/O Only) 11 Floating TTL Up/HVPS Enable/Disable (-I/O Only) 5 Signal Ground Return 12 Floating Signal Ground Return 6 Analog Up/ HVPS Remote Programming Input (-I/O Only) 13 Floating Analog Up/HVPS Remote Programming Input (-I/O Only) 7 +5V Reference Output 14 Floating +5.6V Reference Output ADDITIONAL LOCAL CONNECTIONS (-R/B OPTION) ADDITIONAL ISOLATED CONNECTIONS (-R/B ONLY) PIN FUNCTION PIN FUNCTION 8 +Iout monitor output (Analog Down Channel 1) 1 Floating +Iout monitor input (Analog Down Channel 1) 9 -Iout monitor output (Analog Down Channel 1) 2 Floating -Iout monitor input (Analog Down Channel 1) 10 +Eout monitor output (Analog Down Channel 2) 3 Floating +Eout monitor input (Analog Down Channel 2) 11 -Eout monitor output (Analog Down Channel 2) 4 Floating -Eout monitor input (Analog Down Channel 2) 12 & 13 N/C (reserved for future use) 5 & 6 N/C (reserved for future use) 14 TTL output (Digital Down Channel 1) 7 Floating TTL input (Digital Down Channel 1) ORDERING INFORMATION Type 15kV Isolation 15FL Manufactured in USA Input 12VDC Nominal 12 24VDC Nominal 24 Voltage Watts Output (12 V Only) -12W Power Watts Output (24 V Only) -24W (1) Digital Up Channel & (1) Analog Up Channel -I/O Example: 15FL12-12W-I/O Options (1) Digital Down Channel & (2) Analog Down Channels -RB Isolation Partial Mu-Metal Shield -M Type Option Plastic Case - Diallyl Phthalate Standard Model Case Power ‘Eared’ Chassis Mounting Plate -E Input 1800 Ocean Avenue, Ronkonkoma, NY 11779 ® Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT®