ULTRAVOLT® E SERIES PRECISION HIGH VOLTAGE POWER SUPPLIES Single-output precision high voltage power supply modules The E series of precision high voltage power supplies has very low ripple, excellent linearity, and very stable temperature characteristics. Models in this series are offered at two levels of performance; the best delivers 10 ppm characteristics. This series is ideal for applications where system performance is directly linked to high voltage power quality and performance. Features Typical Applications › Precision output voltage from › Bias supplies 0 to 1 kV through 0 to 15 kV › Mass spectrometry › PPM level ripple, regulation, › SEM/FIB and stability › Electron beams › As low as 10 ppm temperature › Ion beams coecient and reference › 0 to 4, 15/20, or 30 W of output power › Maximum Iout capability down to 0 V › Voltage and current regulation/limit capability › Precision output voltage and current monitors PARAMETER CONDITIONS MODELS UNITS Input All Types Full Power +23 to 30 VDC Voltage Range Standby/Disable < 50 mA Current No Load, Max Eout < 325 mA Current Full Load, Max Eout 2.5 A Current Nominal Input, Full Load < 10 mA pk to pk AC Ripple Current Output 1E 2E 4E 6E 10E 15E Nominal Input 0 to 1000 0 to 2000 0 to 4000 0 to 6000 0 to 10000 0 to 15000 VDC Voltage Range 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 VDC Nominal Input Voltage/Model Nominal Input, Max Eout 4 20 30 4 20 30 4 20 30 4 20 30 4 15 30 4 15 30 Watts Power Iout Entire Output Voltage Range 4 20 30 2 10 15 1 5 7.5 0.67 3.3 5 0.4 1.5 3 0.26 1 2 mA Current Normal Operating Conditions 0 to 10 ±0.5% VDC Voltage Monitor Normal Operating Conditions 0 to 10 ±0.5% VDC Current Monitor Full Load, Max Eout ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ≤ 10 ppm Ripple Nom Input, Max Eout, Full Power < 25 ppm or < 10 ppm VDC Line Regulation No Load to Full Load, Max Eout < 25 ppm or < 10 ppm VDC Static Load Regulation 30 Min Warmup, Per 8 h, Per Day < 25 ppm or < 10 ppm VDC Stability Programming and Controls All Types Nominal Input 10 MΩ Input Impedance 10 to 100% ±0.05% % Adjust Accuracy and Adjust Linearity Differential 0 to +10 VDC Adjust Voltage T = +25°C, Initial Value +10.00 ±0.05% VDC Output Voltage T = +25°C 5 mA Max Source Current Normal Operating Conditions Buffered, low impedance, 2 mA max for source/sink current - Output Impedance 0 to +0.8 disable, +2.5 to 10 enable (default = disable) VDC Enable/Disable Environmental All Types Full Load, Max Eout, Case Temp. +10 to +45 °C Operating Over the Specified Temperature ±25 or ±10 ppm/°C Temperature Coefficient Mil-Std-810, Method 504, Class 2 -40 to +65 °C Thermal Shock Non-Operating, Case Temp. -55 to +105 °C Storage All Conditions, Standard Package 0 to 95%, non-condensing - Humidity Standard Package, All Conditions Sea level through 10,000 ft Altitude Mil-Std-810, Method 516, Proc. 4 20 Gs Shock Mil-Std-810, Method 514, Fig. 514-3 10 Gs Vibration Note: Downloadable drawings (complete with mounting and pin information) and 3D models are available online. PHYSICAL SPECIFICATIONS Construction Aluminum alloy 5052-H32 Material Anodize MIL-A-8625E blue Finish Size 561.9 cc (34.29 in³) Volume 1.1 kg (2.4 lb) Weight Tolerance ±1.27 mm (0.030") Overall ±0.38 mm (0.015") Pin to Pin ±0.64 mm (0.025") Mounting Hole Location Connections 15-pin, female D-Sub LGH1/2L HV Connector #6-32 x 0.437 long threaded post HV Return E SERIES INPUT CONNECTOR PINOUT AND FUNCTIONS Pin Description Function Reference Voltage (+)10.00 V PRECISION REFERENCE 1 Voltage Programming - 0 TO 10 V TO PROGRAM FULL OUTPUT VOLTAGE 2 PROGRAMMING INPUT IS DIFFERENTIAL BETWEEN PINS 2 AND 3. Voltage Programming + 3 Voltage Monitor 0 TO +10 V REPRESENTS 0 TO FULL OUTPUT VOLTAGE 4 Voltage Mode Indicator OPEN DRAIN ACTIVE LOW WHEN IN VOLTAGE CONTROL 5 Signal Ground REFERENCE ALL CONTROL SIGNALS HERE. 6 Input Power +23 TO +30 V 7 Input Power 8 Power Ground INPUT POWER RETURN 9 Power Ground 10 Enable TTL HIGH TO ENABLE, LOW TO DISABLE, DEFAULT IS OFF 11 Current Monitor 0 TO +10 V REPRESENTS 0 TO FULL OUTPUT CURRENT 12 Current Programming 0 TO +10 V SETS CURRENT FROM 0 TO FULL RATED OUTPUT 13 CURRENT Current Mode Indicator OPEN DRAIN ACTIVE LOW WHEN IN CURRENT CONTROL 14 Signal Ground REFERENCE ALL CONTROL SIGNALS HERE. 15 NOTE: Use stud next to high voltage output connector as HV return. A secure ground connection here is critical to safety and proper operation. ORDERING INFORMATION 0 to 1000 VDC Output 1E Type 0 to 2000 VDC Output 2E 0 to 4000 VDC Output 4E 0 to 6000 VDC Output 6E 0 to 10,000 VDC Output 10E 0 to 15,000 VDC Output 15E 24 V Input 24 Input Positive Output -P Polarity Negative Output -N 4 W Output 4 Power 15 W Output (10 and 15 kV only) 15 20 W Output (1 to 6 kV only) 20 30 W Output 30 Performance 10 ppm Line/Load Regulation, Stability, and Temp. Coefficient -10 ppm Level 25 ppm Line/Load Regulation, Stability, and Temp. Coefficient -25 ppm LGH (Standard) Connectors 5 kV, SHV Type -SHV-5 kV 10 kV, BNC Type -BNC-10 kV Popular accessories ordered with this product include our full range of high voltage output connectors. (See Accessories and Connectors datasheet.) Non-RoHS compliant units are available. Please contact the factory for more information. IEC-60950-1 For international contact information, visit advanced-energy.com. ENG-HV-ESeries-230-I 5.16 Specifications are subject to change without notice. ©2016 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and UltraVolt® are U.S. trademarks of Advanced Energy Industries, Inc.