SINGLE OUTPUT HIGH VOLTAGE MODULES 12 HIGH POWER 8C-30C SERIES 8kV to 30kV High Voltage Cap-Charging Supplies This High Power line of high-voltage regulated DC to DC converters is an extension of the C Series, directly addressing the high power density needs of >30 watt applications. High Power 8C - 30C units provide up to 60/125/250 watts. This high power density is especially suited to high-energy systems with large capacitances, fast repetition rates, or high continuous-DC-power requirements. See Application Note 10 for more changing information. Typical applications for the High Power 8C-30C Series include the following: laser, cap-charger, pulse generators, Q-switch, and TDR test equipment. • High efficiency • 7 models from 0 to 8kV through 0 to 30kV • High power to voltage density • 60, 125, or 250 watts of output power • Very low profile • Maximum Iout capability down to 0 Volts • Output current & voltage monitors • Maximum Iout during charge/rise time • >200,000 hour MTBF @65°C • Output short-circuit protection • Fixed-frequency, low-stored-energy design • Very fast rise with very low overshoot • UL/cUL Recognized Component; CE Mark (LVD & RoHS) PARAMETER CONDITIONS UNITS INPUT ALL TYPES Voltage Range Full Power + 23 to 30 VDC Voltage Range Derated Power Range 60W, 125W: + 11 to 30, 250W: 15-30 VDC Current Standby / Disable < 40 mA Current No Load, Max Eout 8C to 15C < 500, 20C to 25C < 600 mA Current Max Load, Max Eout 60W: 3.25, 125W: 6.5, 250W: 13 A AC Ripple Current Nominal Input, Full Load < 50 mA p-p OUTPUT 8C 10C 12C 15C 20C 25C 30C Voltage Range Nominal Input 0 to 8,000 0 to 10,000 0 to 12,000 0 to 15,000 0 to 20,000 0 to 25,000 0 to 30,000 VDC Power Nominal Input, Max Eout 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 60 125 250 Watts Current Iout, Entire Output Voltage Range 7.5 15.5 31.2 6 12.5 25 5 10.5 20.8 4 8.3 16.7 3 6.25 12.5 2.4 5 10 2 4.17 8.33 mA Current Scale Factor Full Load 4.7 14.2 6.25 4.1 10.9 5 4.0 7.4 4.17 4.0 7.5 3.33 .65 .653 2.5 .65 .650 2 .65 .642 1.67 mA/V Voltage Monitor Scaling 60W & 125W Models - 1000:1 ± 2% into 10MΩ; 250W Models - 10,000:1 ± 2% - 4400/ 2200/ 1500/ 2933/ 1467/ 1500/ 2933/ 1467/ 750/ 2200/ 1100/ 750/ 1320/ 880/ 750/ 1100/ 733/ 500/ 825/ 550/ 500/ Internal Capacitance Capacitance / 95% Decay (50Meg Load) pF/mS 659 330 225 439 220 225 439 220 112 330 165 112 200 132 112 165 110 75 125 85 75 Ripple Full Load, Max Eout < 1% < 1% V p-p Rise Time Max Iout, Various C Loads & Eout Figure A - Storage Capacitance Internal 4400 2200 1500 2933 1467 1500 2933 1467 750 2200 1100 750 1320 880 750 1100 733 500 825 550 500 pF Overshoot C Load, 0 Eout to Full Eout < 1% V pk Line Regulation Nom. Input, Max Eout, Full Power < 0.01% VDC Static Load Regulation No Load to Full Load, Max Eout < 0.01% VDC Stability 30 Min. warmup, per 8 hr/ per day < 0.01% / < 0.02% VDC PROGRAMMING & CONTROLS ALL TYPES Input Impedance Nominal Input + Output Models 1.1MΩ to GND, - Output Models 1.1MΩ to +5 Vref MΩ Adjust Resistance Typical Potentiometer Values 10K to 100K (Pot across Vref. & Signal GND, Wiper to Adjust) Ω Adjust Logic 0 to +5 for +Out, +5 to 0 for - Out +4.64 VDC for +Output or +0.36 for -Output = Nominal Eout - Output Voltage & Impedance T=+25°C + 5.00VDC ± 1%, Zout = 464Ω ± 1% - Enable/Disable 0 to +0.8V Disable, +2.0 to 32 Enable (Default = Enable) VDC ENVIRONMENTAL ALL TYPES Operating Full Load, Max E out, Case Temperature -40 to +65 °C Coefficient Over the Specified Temperature PPM/°C ±50 (±25 Optional) Thermal Shock Mil-Std-810, Method 503-4, Proc. II -40 to +65 °C Storage Non-Operating, Case Temp. -55 to +105 °C Humidity All Conditions, Standard Package 0 to 95% non-condensing - Altitude Standard Package, All Conditions Sea Level through 70,000 ft Shock Mil-Std-810, Method 516.5, Proc. IV 20 G’s Vibration Mil-Std-810, Method 514.5, Fig.514.5C-3 10 G’s Specifications subject to change without notice. C = uF C = uF C = uF V = Volts V = kV V = kV I C = uF C x V C x E² I = C x V x F F= T= J= I = mA I = mA I = mA E² = kV C x V I 2 T = mS F = Hz F = Hz J = Ws Figure A - Rise Time Formulas NOTES: Capacitance must include HVPS internal Capacitance. Higher Service, Higher Performance, Higher Reliability ® Making High Voltage Easier! ©2011, UltraVolt Inc. All rights reserved. ® ULTRAVOLT SINGLE OUTPUT HIGH VOLTAGE MODULES 13 HIGH POWER 8C-30C SERIES High Voltage Biasing Supply 8kV to 30kV High Voltage Cap-Charging Supplies 8C TO 15C - 60/125W 20C TO 30C - 60/125W Downloadable drawings (complete with mounting & pin information) and 3D models are available online. 1800 Ocean Avenue, Ronkonkoma, NY 11779 ® Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT® SINGLE OUTPUT HIGH VOLTAGE MODULES 14 HIGH POWER 8C-30C SERIES High Voltage Biasing Supply 8kV to 30kV High Voltage Cap-Charging Supplies 8C TO 30C - 250W (PRELIMINARY) CONSTRUCTION PINS Epoxy-filled Aluminum Box Gold-plated 0.025 (0.64) sq. Chem film per MIL-A-8625 Type II (Anodizing) The center of the pins and mounting holes are located from the center of pin 1 SIZE - 60 & 125W MODELS Pins 1 thru 14 spacing 0.100 (2.54) x 0.200 (5.08) on center, Volume 38.7 in³ (634cc) height from cover 0.280 (7.11) min Weight 2.6 lbs. (1.18kg) Pins 15 and 16 spacing 0.100 (2.54) on center, height from cover 0.450 (11.43) min SIZE - 250W MODELS HV OUTPUT CONNECTION Volume 84.5 in³ (1386cc) Weight 5.6 lbs. (1.18kg) Unit requires an LGH flying lead connector for proper operation: 8C to 15C (60W & 125W Models) = CA-20KV-1000 TOLERANCE 20C to 30C (60W & 125W Models) = CA-40KV-1000 Overall ±0.025” (0.64) 8C to 30C (250W Models) = CA-40KV-1000 Pin to Pin ±0.015” (0.38) Hole to hole location ±0.025” (0.64) 1800 Ocean Avenue, Ronkonkoma, NY 11779 ® Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT® Rev. AB 12/14 SINGLE OUTPUT HIGH VOLTAGE MODULES 15 HIGH POWER 8C-30C SERIES High Voltage Biasing Supply 8kV to 30kV High Voltage Cap-Charging Supplies ORDERING INFORMATION 0 to 8,000 VDC Output 8C 0 to 10,000 VDC Output 10C CONNECTIONS 0 to 12,000 VDC Output 12C PIN FUNCTION Type 0 to 15,000 VDC Output 15C 1 & 8 Input-Power Ground Return 0 to 20,000 VDC Output 20C 2 & 9 Positive Power Input 0 to 25,000 VDC Output 25C 3 Iout Monitor 0 to 30,000 VDC Output 30C 4 Enable/Disable Input 24VDC Nominal 24 5 Signal Ground Return Positive Output -P 6 Remote Adjust Input Polarity Negative Output -N 7 +5VDC Reference Output 60 Watts Output 60 10 N/C (or Arc Detect option) Power 125 Watts Output 125 11, 12, & 13 N/C 250 Watts Output 250 14 Eout Monitor Heat Sink .400” High (sized to fit case) -H 15 & 16 HV Ground Return PCB Support (5) 0.187" standoffs on top cover -Z11 All grounds joined internally. Power-supply 5V Controls and Monitors -I5 mounting points isolated from internal grounds Enhanced Interface 10V Control and Monitors -I10 by >100kΩ, .01uF / 500V (Max). Arc Detect -AD Options Arc Quench -AQ 25PPM Temperature Coefficient -25PPM Note: For more information on the enhanced interface options, download the I5/I10 Option datasheet. Example: 8C24-P125 Voltage Type Model Power Input Polarity Popular accessories ordered with this product include CONN-KIT-HP, BR-7 and BR-8 mounting bracket kits and our full range of high voltage output connectors IEC-60950-1 (see Accessories & Connectors datasheet). Non-RoHS compliant units are available. Please contact the factory for more information. Manufactured in USA 1800 Ocean Avenue, Ronkonkoma, NY 11779 ® Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT®