ULTRAVOLT® D SERIES MICRO-SIZED HIGH VOLTAGE BIASING SUPPLIES Single-output micro-sized HV modules Page 2 The D series of high voltage power supplies is designed to meet the needs of customers with low-profile, < 13 mm (< 0.511") or < 17.5 mm (< 0.689") applications at 1 to 6 W. These ultra-compact modules are ideal for detectors that require high-bias voltages and currents at low ripple. D series PCB-mount high voltage power supplies feature a lightweight design, state-of-the-art surface-mount technology, and five-sided metal enclosures. Features Typical Applications › 4 models from 0 to 1 kV › Scanning electron microscopes › Photo multiplier tubes (PMT) through 0 to 6 kV (SEM) › Photodiodes (PD) › 1, 2, 4 or 6 W output power › Mass spectrometry › Multi-pixel photon counters › Low ripple (< 0.02% peak to › Gas chromatography (MPPC) peak) › Spectrometers › Channel electron multipliers › Tight line/load regulation › Electrostatic chuck (e-chuck) › Silicon detectors (SiD) › Output current limit protection › PZT drivers › Silicon photomultipliers (SiPM) › Adjustable from 0 to full › Pulse generators › Image intensifiers (II and IIT) output › Laser electro-optic modulation › Microchannel plates (MCP) › Buffered voltage and current monitoring › Fiber-optic telecom detectors › Ionization chamber detectors › Particle physics detectors › Thin-film bias › 15 or 24 VDC Input › Laser range finder detectors › High voltage testing › Low profile and lightweight › Detectors › ATE leakage testing › PCB flat mounting › Geiger-Muller tubes (GM) › General laboratory › Avalanche photo diodes (APD) › Bias supplies Page 3 PARAMETERS SPECIFICATIONS UNITS 15 VDC ±1.5 V or 24 VDC ±2 V, according to type VDC Input Voltage Vin (Pins 2 and 3) Example for a 15 VDC, output 6000 V, 1 mA model: - Input Current inhibition mode: 27 mA at no load and HV = 6000 V 46 mA, at full load < 630 mA Fixed positive or negative - Polarity 0 to 1000 0 to 2000 0 to 4000 0 to 6000 VDC Output Voltage 1 2 4 6 1 2 4 6 1 2 4 6 1 2 4 6 W Output Power 1 2 4 6 0.5 1 2 3 0.25 0.5 1 1.5 0.17 0.33 0.67 1 mA Output Current Via external voltage source 0 to +5 V ±0.1% at full scale, and input impedance = 94 kΩ - Programming (Pins 4 and 6) Limited to 110% of nominal current - Max Output Current Iout ±0.01% of full output voltage for no load to full load VDC Load Voltage Regulation ±0.01% of full output voltage over specified input voltage range VDC Line Voltage Regulation < 0.02% at full load V pk to pk Residual Ripple 100 PPM/°C Temperature Coefficient Analog 0 to +5 V buffered output signal, accuracy ±0.2% - Output HV Monitoring (Pin 7) {still operating Output impedance = 1 kΩ in inhibition mode} Temperature coefficient: 50 ppm/°C for ≤ 4 kV units, 100 ppm/°C for 6 kV units Analog 0 to +5 V buffered output signal, accuracy ±2% - Output Current Monitoring (Pin 5) {still Output impedance = 1 kΩ operating in inhibition Temperature coefficient: 100 ppm/°C mode} To disable (opened remote interlock) or enable (closed remote interlock) - HV ON/OFF (Pin 1) -10 to +65, full load, max Eout, Tcase temp °C Operating Temperature -10 to +70 °C Storage Temperature Protected against reverse Vin - Safeguards Soft start feature: the start is guaranteed with no overshoot Auto inhibition if case > 75°C HV setting internally limited to 5.3 V Page 4 1 to 4 kV, 1 to 4 W PHYSICAL SPECIFICATIONS Tin steel plate, thickness 0.5 mm Construction Insulation: fully potted in an epoxy resin 1-4kV, 1-4W 3 1 to 4 kV, 1 to 4 W: 36.2 cc (2.21 in ) Volume 1 2 3 4 5 6 7 8 1 to 4 kV, 6 W and 1 to 6 kV, 1 to 6 W: 48.6 cc 3 (2.97 in ) 1 to 4 kV, 1 to 4 W: 72 g (2.54 oz) Weight 1 to 4 kV, 6 W and 1 to 6 kV, 1 to 6 W: 85 g (3 oz) Tolerance 1 to 4 kV, 6 W and 1 to 6 kV, 1 to 6 W ±0.3 mm (0.0118") Overall ±0.1 mm (0.0039") Pin to Pin 1-4kV, 6W ±1.5 mm (0.0591") Case to Pin 1-6kV, 1-6W Standard case length, width, and height specs are 1.27 mm (0.050") 1 2 3 4 5 6 7 8 Pin length > 6 mm (0.24"), spacing 2.54 mm (0.1") CONNECTIONS Pin Function ENABLE/DISABLE 1 POWER GROUND 2 TOP VIEW POSITIVE POWER INPUT 3 SIGNAL GROUND 0.0248² (0.63²) 4 IOUT MONITOR 5 ( ) 0.100 2.54 REMOTE ADJUST INPUT 6 ( ) EOUT MONITOR 1.75 44.45 7 HV OUTPUT 8 ( ) 1.00 25.4 0.276 (7±0.5) ( 2.5 63.5) IEC-60950-1 Non-RoHS compliant units are available. Please contact the factory for more information. Page 5 ( ) 0.886 22.5 ±0.5 ( ) 0.125 3.175 ( ) 0.697 17.7 ( ) ( ) ( ) 1.73 44.0 0.689 17.5 0.511 13 ORDERING INFORMATION 0 to 1000 VDC Output 1D Type 0 to 2000 VDC Output 2D 0 to 4000 VDC Output 4D 0 to 6000 VDC Output 6D 15 VDC Nominal 15 Input 24 VDC Nominal 24 W Output 1 Power W Output 2 W Output 4 W Output 6 Steel, Tin-plated (Standard) Case Positive Output -P Polarity Negative Output -N The D series is not available in all territories. Please contact Advanced Energy for details concerning sales in your area. Example: 6D24-P6 Output Type Model Power Input Polarity For international contact information, visit advanced-energy.com. ENG-HV-DSeries-230-A 10.16 Specifications are subject to change without notice. ©2016 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and UltraVolt® are U.S. trademarks of Advanced Energy Industries, Inc.