ADVANCED ENERGY FIL-5V-3A-E

LOW-VOLTAGE FILAMENT SUPPLY 69 FIL SERIES Precision Filament Supply The FIL Series is a non-isolated precision filament supply. This line of regulated DC-DC converters addresses the needs of the high precision and high stability power supply user. Designed and built utilizing a state-of-the-art power-conversion topology, these units feature surface-mount technology and encapsulation techniques that provide high reliability and low cost. The FIL Series supply allows users to properly operate the filament to maximize performance and extend its life. Typical applications for this series include precision filaments for mass spectrometry, electron beams, and test equipment. • High precision and high stability • Indefinite output short-circuit protection • 15PPM temperature coefficient • Buffered output current & voltage monitors • 0 to 5VDC • Excellent linearity & accuracy of control • 0 to 3 Amps of current • Current mode and voltage mode indicator • Maximum Iout capability down to 0 Volts • Synchronizable • Programmable voltage and current controls PARAMETER CONDITIONS MODELS UNITS INPUT ALL TYPES Operating Range All Conditions +24 ± 10 VDC Current Full Load Output 900mA Typical mA OUTPUT ALL TYPES Voltage Range Nominal Input 0 to 5 VDC DC Current Range Nominal Input 0 to 3 Amps Voltage Range Derated 0 to 5.7 VDC DC Current Range Derated 0 to 3.3 Amps Voltage Monitor Scaling Full Load 10 VDC Current Monitor Scaling Full Load 10 VDC PROGRAMMING & CONTROLS ALL TYPES Input Impedance Nominal Input + Output Models 10MΩ to GND MΩ Adjust Resistance Typical Potentiometer Values 10K to 100K (Pot across Vref. & Signal GND, Wiper to Adjust) Ω Adjust Voltage Referenced to signal ground 0 to +10 VDC VDC Accuracy In current control ±0.1% Amps Offset Voltage control 0.04% VDC Offset Current control 0.001% Amps Output Voltage T=+25°C, Initial Value +10.0V ± 0.05% VDC Enable/Disable 0 to +0.5 Disable, +2.4 to 10 Enable (Default = Enable) VDC ENVIRONMENTAL ALL TYPES Operating Full Load, Max Eout, Case Temp. +10 to +45 °C Coefficient Over the Specified Temperature ≤ PPM/°C 15 Thermal Shock Mil-Std 810, Method 503-4, Proc. II -40 to +65 °C Storage Non-Operating, Case Temp. -55 to +85 °C Altitude Standard Package, All Conditions Sea Level through Vacuum - Shock Mil-Std-810, Method 516.5, Proc. IV 20 G’s Vibration Mil-Std-810, Method 514.5, Fig.514.5C-3 10 G’s Specifications subject to change without notice. Higher Service, Higher Performance, Higher Reliability ® Making High Voltage Easier! ©2011, UltraVolt Inc. All rights reserved. ULTRAVOLT® Rev. E 10/14 LOW-VOLTAGE FILAMENT SUPPLY 70 FIL SERIES High Voltage Biasing Supply Precision Filament Supply INPUT/OUTPUT WIRING DIAGRAM FIL(+) OUTPUT +24V INPUT The filament power supply load should FIL-5V-3A be connected between the FIL(+) output R LOAD and the FIL(-) output, load current should +24V RETURN FIL CENTER TAP not flow through the center tap, which is common with the (+)24V return. The FIL(-) or FIL(+) outputs should not be grounded. FIL(-) OUTPUT CONSTRUCTION Epoxy-filled DAP box certified to ASTM-D-5948 SIZE Volume: 6.35 in³ (104cc) Weight: 6.75 oz (191g) TOLERANCE Overall ±0.050” (1.27) Pin to Pin ±0.015” (0.38) Mounting hole locations ±0.025” (0.64) NOTES -M equipped units are an additional 0.030” (0.76) in height. Contact UV Customer Service for drawings of models equipped with -E or -H options. Downloadable drawings (complete with mounting & pin information) and 3D models are available online. CONNECTIONS PIN FUNCTION Non-RoHS compliant units are available. Please contact the 1 & 8 Input-Power Ground factory for more information. 2 & 9 Positive Power Input 3 Iout Monitor Manufactured in USA 4 Enable/Disable 5 Signal Ground ORDERING INFORMATION 6 Voltage Programming Type 0 to 5 VDC Output FIL-5V 7 +10.0V Reference Output Current Current Output (0 to 3A) -3A 10 Sync In Case ‘Eared’ Chassis Mounting Plate -E 11 Imode Indicator Heat Sink .400” High (sized to fit case) -H 12 Vmode Indicator Shield Six-sided Mu-Metal Shield -M 13 Current Programming 14, 17, & 18 Vout Monitor Example: FIL-5V-3A-M 15 & 16 Fil Output (-) 19 & 20 Fil Output (+) 21 & 22 Center Tap Model Option (Mu-Metal) All grounds joined internally. Output Voltage Output Current 1800 Ocean Avenue, Ronkonkoma, NY 11779 ® Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT®