SECTION 3 ® SB 175 ® SB 175 Connectors - up to 280 Amps Wires sizes from #10 (5.3 mm²) to 1/0 (50 mm²) Ţ t in ® the second to largest connector in the SB series. The ® 3 pole SB 175 adds an additional position for power or grounding. All Multipole wire connector housings are genderless and mate to themselves minimizing inven- tory and assembly complexity. 2 Pole 3 Pole • Silver Plated Wire Contacts up to 1/0 (50 mm²) Allows UL rated currents up to 280 amps • Chemical Resistant Housing Option Extends temperature range down to -40°C, while offering enhanced UV and chemical resistance • UL Rated for Hot Plugging up to 100 Amps Great for battery or other applications where the ability to interrupt circuits is required ® | SB 175 ORDERING INFORMATION | ® SB 175 Standard Housings ® The second to largest SB housings work with wire contacts up to 1/0 AWG [50 mm²] as well as busbar contacts. Genderless design mates with ® itself. Mechanical keys are color coded. NOTE: SB 175 black housing is keyless and can be mated with all other colors. Description --- Part Numbers --- Minimum Quantity .......... 200 50 ... Bottom View Yellow 943-BK 943 Orange 942-BK 942 [ 79.6 ] Red 949-BK 949 3.13 Gray 940-BK 940 [ 6.5 ] Ø 0.26 Blue 941-BK 941 (2) PLC’S Black (Keyless) 2-7252G11 - [ 55.6] 2.19 Material ID P = Chemical Resistant [ 11.3 ] [ 28.6 ] 0.45 1.13 Mated Length [ 133.4 ] ® SB 175 Chemical Resistant Housings 5.25 ® Same features as the Standard SB 175 but molded in a chemical resistant PBT/ PC blend. Suitable for use to -40°C. [ 25.4 ] Description ---- Part Numbers ---- 1.00 Minimum Quantity .... 200 50 ... Red P949-BK P949 Gray P940-BK P940 © 2018 Anderson Power Products, Inc. All rights reserved. APP®, Anderson Power Products®, A®, SB® and the APP Logo are registered trademarks of Anderson Power Products, Inc. - 77 - All Data Subject To Change Without Notice www.andersonpower.com ® Top View SB 175 3 Pole Housings & Hardware [ 11.7 ] [ 79.4 ] ® A three pole version of the standard SB 175 housing has [28.6] 0.46 3.13 [ 6.7 ] 1.13 a two piece housing with springs and hardware. Useful for Ø 0.27 (4) DC 2 wire plus ground and AC single phase applications. Description --- Part Numbers --- Minimum Quantity .......................... 100 25 .... [ 28.6 ] Gray Housing and Hardware Kit - 902 1.13 Side View Gray Housing Top Half 2-5048 - [ 82.6 ] Gray Housing Bottom Half 2-5049 - 3.25 Hardware Kit - 110G34 [ 25.4 ] [ 26.2 ] 1.00 1.03 ® SB 175 Silver Plated Wire Contacts Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. See reducing bushings in accessory section for smaller wires. Dimensions Mating Loose Piece - A - - B - - C - - D - AWG mm² Force - Part Numbers - inches mm inches mm inches mm inches mm Minimum Quantity ........... 500 50 .......................................................................................................... 1/0 53.5 High 1382-BK 1382 2.35 59.69 0.52 13.21 0.44 11.18 1.04 26.42 1 42.4 High 1347-BK 1347 2.35 59.69 0.52 13.21 0.39 9.91 1.04 26.42 2 33.6 High 1383-BK 1383 2.35 59.69 0.52 13.21 0.35 8.89 1.04 26.42 4 21.1 High 1384-BK 1384 2.35 59.69 0.52 13.21 0.30 7.62 1.04 26.42 6 13.3 High 1348-BK 1348 2.10 53.34 0.37 9.40 0.22 5.59 0.80 20.32 A D C [ 12.7 ] B 0.50 ® SB 175 Silver Plated Busbar Contacts Provides a quick disconnect input or output busbar connection. Busbar contacts are for mating with wire contacts only. Part number 180BBS includes lock nuts. Locknuts must be ordered separately for 180BBS-BK. Mating See Busbar contact drawing on Type Thread Force ------ Loose Piece Part Numbers ------ website for further detail. Minimum Quantity ................... 1,000 120 10 .... [ 109.0 ] #¼- 20 THD Busbar 1/4-20 High - 180BBS-BK 180BBS 4.29 Lock Nut 1/4-20 - H1216P7 110G56 110G55 [ 25.4 ] B 1.0 [ 12.7 ] 0.5 [ 4.57 ] 0.18 - 78 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SB 175 SECTION 3 ® SB 175 ® | SB 175 CONNECTOR SPECIFICATIONS | Electrical Mechanical Current Rating Amperes ¹ UL 1977 CSA Wire Size Range AWG mm² Wire to Wire (1/0 AWG) 280 175 Wire Contacts with Bushings 10 to 1/0 5.3 to 53.5 Wire to Busbar (1/0 AWG) 200 3 Pole Wire to Wire (1/0 AWG) 175 Max. Wire Insulation Diameter in. mm 0.600 15.240 Voltage Rating AC/DC UL 1977 600 Operating Temperature² °F °C Standard -4° to 221° -20° to 105° Dielectric Withstanding Voltage Chemical Resistant* -40 to 221° -40° to 105° Volts AC 2,200 Mating Cycles No Load by Plating Silver (Ag) Avg. Mated Contact Resistance Milliohms ¹ Wire and Busbar Contacts 10,000 6” of 1/0 AWG wire 0.100 Avg. Mating / Unmating Force Lbf. N UL Hot Plug Current Rating Amperes - Wire & Busbar 2 Pole 25 111 250 cycles at 120V DC 1/0 wire 100A 3 Pole 35 156 Materials Min. Contact / Spring Retention Force lbf 150 Housing N 667 Standard Plastic Resin Polycarbonate Chem. Resistant Resin Polycarbonate / PBT blend 4 Mechanical Shock Contact Retention Spring Stainless Steel MIL-STD-202 213 Condition A 50g’s Housing Flammability Rating 4 Vibration High Frequency UL94 V-0 MIL-STD-202 204 Condition A 10g’s Glow Wire 960°C (GWFI) / 850°C (GWIT) Wire & Busbar Contacts NOTE 1: See IEC 60664-1 for working voltage. Base Copper Alloy NOTE 2: Amp ratings are stated per position and based on all positions being fully loaded. Plating Silver ¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP recommended tooling, and a 25°C Contact Termination Methods ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating Crimp ³ Wire Contacts below a 30°C temperature rise. Hand Solder Wire Contacts Wrench / Socket Busbar Contacts ² Limited by the thermal properties of the connector plastic housing. ³ Use APP recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition. 4 Tested with contact part number 1382. | IEC INFORMATION | Connector Creepage/Clearance Material Series Configurations per IEC 60950-1 Group Unmated 5.73 mm SB®175 IIIa Mated 5.73 mm Attributes SB175 Protection Touch Safety with Wire Contacts AMP Rating AC/DC 175 IEC 60529 IP10 Voltage Rating AC/DC (Steady State) 500 V AC/DC ( Operational) Environmental Sealing with Boots Breaking Capacity - AMP Rating /Cycles 175 Amp / 10 Cycles IEC 60529 IP64 Voltage Rating (Breaking Capacity) 220 VDC Finger Safety - Mated Only IEC 60529 - IP20 Wire Size Tested 50 mm² Contact Series Tested 1382 Climatic Testing (Cold, Heat & MFG) IEC 60512 Test -11j, 11i & 11g, NOTE 3: Refer to the Constructional Data form for additional Cycle Life IEC 60512 Test 9a - 5000 Cycles information on our website., www.andersonpower.com Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - dropped 8 times Temperature Range -20 °C to 105 °C -4 °F to 221 °F - 79 - All Data Subject To Change Without Notice www.andersonpower.com ® Temperature rise charts are based on a | SB 175 CONNECTOR TEMPERATURE CHARTS | 25°C ambient temperature. For Temperature Rise Above 60°C, Consult the Extended Temperature Rise Charts in the Appropriate Product Section on the Website. Current - Temperature Derating per IEC 60512-5-2 Test 5B ® SB 175 ® SB 175 Temperature Rise at Constant Current Derating vs. Ambient Temperature 60 125 50 100 40 30 75 20 50 10 0 25 0 25 50 75 100 125 150 175 200 225 250 0 25 50 75 100 125 150 175 200 225 250 275 300 Amperes Applied Amperes Applied 1/0 AWG 1 AWG 1/0 AWG 1 AWG 2 AWG 4 AWG 2 AWG 4 AWG ® | SB 175 ACCESSORIES | Cable Clamps Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Only Bolt On type clamps can be used with the handles. Cable clamps are recommended for solder terminated wires. Not for use with 3 pole housing. Cable Size Max / Min In. Max / Min mm Description Inches O.D. mm O.D. ---- Part Numbers ---- Minimum Quantity ................................................................................... 100 50 .... 945G3 Self Attaching for Discrete Conductor 0.55 to 0.24 14 to 6 105G3 945 Bolt On for Discrete Conductor 0.66 to 0.24 16.7 to 6.2 945G3-BK 945G3 "A" Frame Handle Bolt On for Bundled Conductor 0.75 to 0.29 18.3 to 7.3 946G1-BK 946G1 (not included). "A" Frame Handle 946G1 (not included). The given wire O.D. information is an estimate. Cable clamps should be 945 evaluated for performance with the actual wire to be used. Handles Handles are made out of durable PC plastic. Hardware to attach to connector body included in kits. Not for use with 3 pole housing. Description ----- Part Numbers ----- Minimum Quantity .... 100 25 ... 995G1 Gray Handle Kit - 995G1 Red Handle Kit - 995G3 Handle Only, Gray 3-5074P1 - Handle Only, Red 3-5074P3 - Handle Only, Black 3-5074P5 - Hardware Bag - 105G8 - 80 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SB 175 Temperature Rise Above Ambient (°C) Ambient Temperature (°C) SECTION 3 ® SB 175 Dust Cover Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. Not for use with 3 pole housing. Description ----- Part Numbers ---- Slide cover over Minimum Quantity ............................. 500 50 ... mating end. Dust Cover with Lanyard Strap, Red 113890P2 134G2 ® SB Environmental Boots ® ® SB Environmental Boots provide water, dirt, chemical and UV protection for SB 175 connectors. The durable boots shield the connectors from water and dirt to IP64* in both the mated and unmated condition. Dimensions Description --------------- Part Number -------------- - A - - B - - C - Minimum Quantity ...................................... 250 25 ... in mm in mm in mm ® SB 175 Environmental Boot, Load 3-6037P1-BK 3-6037P1 9.5 241 3.2 80 9.3 236 ® SB 175 Environmental Boot, Source 3-6036P1-BK 3-6036P1 A *IP64 test pending C B ® SB 175 Lockout Works with standard lockout - tagout equipment to prevent access to the mating interface of the connector. Made from durable PC plastic. Can be used with 3 pole housing to lockout positive and negative positions only. ® Description ---- Part Number ---- SB 175 Connector not included. Minimum Quantity .......... 25 ... Red Lockout - Tagout Kit SB175-LOCKOUT Manual Release Bracket - Mounting Side Works with the Locking Side to ease mating and unmating connectors. Not for use with 3 pole housing. Description - Part Number - Minimum Quantity ............ 10 ... Mounting Plate Bracket and Hardware Kit 924G1 Locking Plate Manual Release Bracket - Locking Side Works with the Mounting Side to ease mating and unmating Handle connectors. Not for use with 3 pole housing. Cable Size Max / Min Max / Min Description Inches O.D. mm O.D. - Part Number - Minimum Quantity ............................................................................ 10 .... Bracket and Hardware Kit w/ Clamp 0.50 to 0.21 12.6 to 5.4 923G1 Cable Clamp The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. Reducing Bushings: for Use with Contact # 1382 Use with contact part number 1382-BK to allow a smaller wire to be used with the connector. Electrical capability is derated with smaller wire. Dimensions - ID - Contact Barrel Size Wire Size ----------------- Part Numbers ------------------ inches mm Minimum Quantity ....................................................... 1,500 1,000 500 100 ...................... [ 25.4 ] ID 1/0 AWG [53.5 mm²] #1 AWG [42.4 mm²] - - 5687-BK 5687 0.39 9.91 1.00 1/0 AWG [53.5 mm²] #2 AWG [33.6 mm²] 5690-BK - - 5690 0.34 8.64 1/0 AWG [53.5 mm²] #4 AWG [21.2 mm²] - 5693-BK - 5693 0.27 6.86 1/0 AWG [53.5 mm²] #6 AWG [13.3 mm²] - 5663-BK - 5663 0.22 5.59 Wire Entrance 1/0 AWG [53.5 mm²] #10 - 8 AWG [5.3 - 8.4 mm²] 5648-BK - - 5648 0.19 4.83 - 81 - All Data Subject To Change Without Notice 2018-0054 DS-SB175 REV C6 www.andersonpower.com ® SB - Tooling Information Loose Piece Wire Size Part Numbers Loose Piece Contact Crimp Tools Number Silver Pneumatic of Hand AWG mm² Plating Bench Tool Die Locator Crimps Tool SB®50 1307 #6 13.3 1388G6 1389G6 5900 1309G4 1387G1 Single #8 8.4 5952 5953 #10 / 12 5.3 / 3.3 1388G7 1389G7 5915 SB®120 1388G3 #1 42.4 1323G1 #2 33.6 1319 1368 1387G1 1389G4 Single 1388G4 #4 21.2 1319G4 Series #6 13.3 1319G6 SB®175 1/0 53.5 1382 #1 42.4 1347 1368 1387G2 1303G13 1304G32 Double #2 33.6 1383 Series #4 21.1 1384 1387G1 1388G4 1389G3 Single #6 13.3 1348 SB®350 N/A 300mcm 152 910 4/0 107.2 908 1303G3 1368 Double 3/0 85 916 Series 1387G2 1304G31 1303G12 2/0 67.4 907 1/0 53.5 917 NOTE: See website for the most current information. - 86 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SB