BEI SENSORS 8360360
Specifications
Manufacturer
BEI SENSORS
Manufacturers Part #
8360360
Lead Time
10 Week Lead Time
Industry Aliases
8360360
Sub-Category
Optical Encoders
Factory Pack Quantity
1
Datasheet
ds_8360_Series.pdf
421 KiB
Extracted Text
8360 Series 8360 Series 360° Non-Contacting Through-Hole Position Sensor 360° Non-Contacting Through-Hole Position Sensor BEI Sensors BEI Sensors The 8360 Series is BEI Sensors’ latest addition to the company’s line-up of robust, reliable, and highly accurate non-contacting position sensors. The 8360’s low profile and through- hole design make it desirable for applications like steering wheel and boom angle, where space is limited and the sensor must mount around a shaft. The sensor’s dual analog output is capable of resolving 360 degrees of motion with high accuracy and 12 bit resolution. The 8360 Series provides IP65 sealing, 360 degree continuous rotation, a robust package and wide operating temperature range, making it especially well suited for applications with harsh environments like industrial vehicles, agricultural and construction equipment and process controls. Non-contacting, redundant outputs provide the high reliability and long life that are an absolute necessity in applications such as medical equipment or wind/solar energy applications. A wide range of adaptations are available including PWM or Can Bus output, shaft interface, electrical angle, connector type, cable length, output slope and much more. Features Non-contacting technology Through-hole design Provides long life Fits around shaft, shaft options available Output signal choices Environmental Analog, PWM, CAN Bus IP65-protected from dust and water jets Electrical angle Operating temperature The standard version is available with rotational angles in 15 degree increments, up to 360° -30° to +85°C standard, (option for -40°C to +125°C) Connector Electrical protection Flying lead terminated w/6 pin AMP connector P/N 776434-1, contact P/N 1924463-1, other options Overvoltage, short circuit, ESD available Magnetic Shielding to 20G Mechanical Specifications Electrical Specifications Environmental Specifications Mechanical travel : travel 0° to +360° with no stops, Electrical angle : 15° to 360° in 15 degree increments Environmental Sealing : IP65 standard allowing for 360 degree continuous rotation standard (other options available) Electromagnetic compatibility : 100V/meter, 15kHz – Actuation (starting) Torque : 0.2 N-m (28.5 oz-in) Input voltage : 5.0 V±0.25V DC 1GHz range Weight 220 grams max. Input current : 16mA maximum per output Vibration : 10 – 10,000 Hz, Total PSD: 4.94 Grms Rotational life : 10 million revolutions 32mA maximum total (both channels) Shock : 50Gs, half sine pulse, 11 m sec duration Sensor Output : 0.25V – 4.75V for Analog at 5.0V input Operating temperature range : -30°C to +85°C (wider Accuracy : +/- 0.6% operating temperature -40° to +125 C° available) Resolution : 12 Bit, 0.088 degree Storage temperature range : -40°C to +105°C Ordering information FOR ASSISTANCE CALL 800-350-2727 SAMPLE: 8360075 (8360 Sensor with 75 Degrees Active Electrical Angle 8360XXX Consult factory for options including: *Standard Active Electrical Angles • Non-standard output slope 015 = 15 degrees 195 = 195 degrees • Clipped outputs 030 = 30 degrees 210 = 210 degrees • Non-standard Active Electrical Angles 045 = 45 degrees 225 = 225 degrees 060 = 60 degrees 240 = 240 degrees • PWM output (pulse width modulation) 075 = 75 degrees 255 = 255 degrees • Special marking 090 = 90 degrees 270 = 270 degrees • CAN Bus output 105 = 105 degrees 285 = 285 degrees • Multi-turn 120 = 120 degrees 300 = 300 degrees • Lead length 135 = 135 degrees 315 = 315 degrees • Connector type 150 = 150 degrees 330 = 330 degrees • IP67 sealing 165 = 165 degrees 345 = 345 degrees • Shaft interface 180 = 180 degrees 360 = 360 degrees 7230 Hollister Avenue Tel: 800-350-2727 Goleta, CA 93117 Fax: 805-968-3154 www.beisensors.com Rev 3-17-15 8360 Series 360° Non-Contacting Through-Hole Position Sensor BEI Sensors Dimensions Dimensions Spline Details Output Function Rotor Interface is 12 tooth spline Pitch Angle: 30° Diametral Pitch: 16/32 Pitch Diameter: 19.05 Largest Diameter: 20.3 ± 0.1 Smallest Diameter: 16.5 ± 0.5/-0 (Ref ANSI B92.1 - 1970 Tol. Class B) Connector Connector Pin Layout PIN # Pinout Color 1 Voltage Supply Red 2 Output 1 White 3 GND Black 4 Voltage Supply Yellow 5 Output 2 Green 6 GND Brown 7230 Hollister Avenue Tel: 800-350-2727 Goleta, CA 93117 Fax: 805-968-3154 www.beisensors.com Rev 3-17-15
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 8360360?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
EXPRESS ENCODER, HEAVY DUTY 2.5" DIA SQUARE FLANGE MOUNT, 1.25" DIA PILOT AND 3/8" DIA SHAFT, ROTATI...
EXPRESS ENCODER, HEAVY DUTY 2.5" DIA SQUARE FLANGE MOUNT, 1.25" DIA PILOT AND 3/8" DIA SHAFT, ROTATI...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods