CRYDOM CN240A24

PCB Mount DataSheet CN Series • 5mm Mini SIP SSR • Ratings 24 VDC @ 3.5 A, 48 VDC @ 100mA and 240 VAC @ 2 A • DC Control, 5, 24 and 60 V • UL & cUL recognized @ 40°C, 100K-Cycle Endurance Test • CE & RoHS Compliant PRODUCT SELECTION Control Voltage 3.5 A 100mA 2 A 3-12 VDC CN024D05 CN048D05 CN240A05 15-30 VDC CN024D24 CN048D24 CN240A24 38-72 VDC CN024D60 CN048D60 CN240A60 AVAILABLE OPTIONS Operating Voltage 240A: 240 VAC, 2 A Switching Mode 024D: 24 VDC, 3.5 A Blank: Zero Voltage Turn-On Series 048D: 48 VDC, 0.1 A R: Random Turn-On 24 R CN 240A Control Voltage 05: 3-12 VDC 24: 15-30 VDC 60: 38-72 VDC Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description CN024Dxx CN048Dxx CN240Axx Operating Voltage 0-24 VDC 0-48 VDC 24-280 VAC (47-63Hz) 3.5 A 100mA (3) 2 A Maximum Load Current @ 40°C (2) Minimum Load Current [mA] 1 1 70 Maximum Blocking Voltage 30 VDC 60 VDC 600 VDC Maximum Surge Current [Apk] 9 (10ms) 0.3 mA (10ms) 115/120 (50/60 Hz, 1 cycle) N.A. N.A. 66/60 Maximum I²t for fusing 50/60Hz (1/2 cycle) [A² sec] Typical On-State Voltage Drop @ Rated Current (V) 0.4 1.0 1.1 (peak) 0.001 0.001 4.0 Maximum Off-State Leakage Current @ Rated Voltage [mA] Maximum PWM (Hz) (4) 500 500 N.A. Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (5) N/A N/A 500 Switch Configuration N.O. N.O. N.O. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. PCB Mount DataSheet INPUT SPECIFICATIONS FOR CN024 (1) Description CN024D05 CN024D24 CN024D60 3.0-12 VDC 15-30 VDC 38-72 VDC Control Voltage Range Must Turn On Voltage 3.0 VDC 15 VDC 38 VDC Must Turn Off Voltage 1.0 VDC 5 VDC 5 VDC Nominal Input Impedance 500 Ohm 3.5K Ohm 20K Ohm Typical Input Current 10mA @ 5 VDC 7mA @ 24 VDC 3mA @ 60 VDC 120 350 400 100 80 70 INPUT SPECIFICATIONS FOR CN048 (1) Description CN048D05 CN048D24 CN048D60 Control Voltage Range 3.0-12 VDC 16-30 VDC 38-72 VDC Must Turn On Voltage 3.0 VDC 16 VDC 38 VDC Must Turn Off Voltage 1.0 VDC 5 VDC 5 VDC Nominal Input Impedance 1.25K Ohm 3.5K Ohm 20K Ohm Typical Input Current 4mA @ 5 VDC 5mA @ 24 VDC 3mA @ 60 VDC 20 20 20 130 130 130 INPUT SPECIFICATIONS FOR CN240 (1) Description CN240A05 CN240A24 CN240A60 Control Voltage Range 3.0-12 VDC 15-30 VDC 38-72 VDC Must Turn On Voltage 3.0 VDC 15 VDC 38 VDC Must Turn Off Voltage 1.0 VDC 5 VDC (6) 5 VDC Nominal Input Impedance 240 Ohm 3.5K Ohm 20K Ohm Typical Input Current 15mA @ 5 VDC 6mA @ 24 VDC 4mA @ 60 VDC (6) 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input/Output (50/60Hz) (7) 2.5KV Maximum Capacitance, Input/Output 1.5 pF -20 to 80°C Ambient Operating Temperature Range -20 to 100°C Ambient Storage Temperature Range 0.14 oz. (4.05g) Weight (typical) UL 94 V0 Housing Material Overvoltage Category lll 2 Polution Degree IP67 Degree of protection (Encapsulation) GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Turn-On time for random turn-on versions is 0.01 msec (DC control Models). (4) Operating frequency above 500Hz will damage the SSR (DC output only). (5) Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (6) Turn-on time for random turn-on version is 0.1msec. (7) 3.75KV for CN048Dxx Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. PCB Mount DataSheet THERMAL DERATE INFORMATION DERATE CURVES: DERATE CURVES: CN024D - 3.5 A CN024 A - 2 AMP 3.5 2 3 2.5 1.5 2 1 1.5 0.5 1 0.5 0 30 80 20 40 50 60 70 0 30 20 40 50 60 70 80 Ambient Temperature (ºC) Ambient Temperature (ºC) DERATE CURVES: CN048D - 100mA 0.1 0.08 0.06 0.04 0.02 0 20 30 40 50 60 70 80 Ambient Temperature (ºC) MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 0.99 [25.2] 0.84 [21.4] 0.20 0.08 [5.0] [1.9] 0.20 1.10 [5.0] [28.0] 0.59 [15.0] 0.15 1 14 4 13(+) A1+ A2- [3.8] 0.15 [3.8] 0.02 [0.4] 0.040 ±.005 0.020 ±.005 0.06 [1.00 ±.13] [0.50 ±.13] [1.4] (2PLACES) (2PLACES) Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amps) Load Current (Amps) Load Current (Amps) PCB Mount DataSheet AGENCY APPROVALS Agency Approvals Designed in accordance with the requirements of IEC 62314 E116950 ACCESSORIES DRSCN Series DIN Rail Mountable Sockets ID Marker Strips DRSCN05, DRSCN24 CNLB, CNLN, CNL2 Blank Strips Sockets are fully compatible with CN series SSRs Part no.: CNLB 6.2 mm wide A package of 10 plastic strips comprising 10 LED status indicator individual unprinted markers which can be placed Socket clip fits all standard 35 mm on sockets’ terminal block for easy identification DIN rail profiles during the use of multiple units. UL & cUL recognized, CE & RoHS compliant Numbered 1 to 10 Strips Part no.: CNLN A package of 10 plastic strips comprising 10 markers printed individually from 1 to 10 which can be placed on sockets’ terminal block for easy identification during the use of multiple units. (G, H) RELAY/SOCKET COMPATIBILITY Numbered 11 to 20 Strips Socket Input Part no.: CNL2 SSR PN DR Socket PN Voltage A package of 10 plastic strips comprising 10 markers printed individually from 11 to 20 which can be placed CN024D05 on sockets’ terminal block for easy identification CN048D05 DRSCN05 3-12 VDC during the use of multiple units. CN240A05 CN024D24 CN048D24 DRSCN24 15-30 VDC CN240A24 (G) Installing a CN Series solid state relay in a socket that does not have matching input/output specifications may result in non-operation or damage to either the relay, socket or both. (H) Maximum output rating for DRSCN Series sockets is 250 V / 6 Amps regardless of chosen SSR. Rev. 060116 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. PCB Mount DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI 存在电击、 ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. EXPLOSION. • 在操作此设 • Desconectar • Eteindre • Spenga tutta • Disconnect all • Stellen Sie todos los toutes les l'alimentazione 备之前请先 power before jeglichen suministros de sources che fornisce 关闭电源。 installing or Strom ab, der energia a este d'énergie de questa working with dieses Gerät equipo antes cet appareil apparecchiatura 若不遵守这些说明， this equipment. versorgt, bevor de trabajar avant de prima di lavorare 可能会导致严重的 Sie an dem travailler a questa con este equipo. • Verify all Gerät Arbeiten 人身伤害甚至死亡。 dessus de cet apparecchiatura connections • Verificar todas durchführen appareil and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima überprüfen Failure to follow dell’accensione olace avant de und alle these El mettre sous Abdeckungen instructions will L'omissione di incumplimiento ersetzen. result in death De non-suivi de queste istruzioni de estas or serious injury. ces instructions provocherà la Unterlassung instrucciones provoquera la morte o dieser puede provocar mort ou des lesioni serie Anweisungen la muerte o lésions sérieuses können zum lesiones serias. sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND RISK OF MATERIAL DAMAGE AND HOT SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG ENCLOSURE • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie • The product's side panels may be hot, allow chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. the product to cool before touching. toucher. • Beachten Sie die Montageanweisungen, • Follow proper mounting instructions including • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder torque values. notamment les couples de serrage. Fremdkörper in das Produkt ein. • Do not allow liquids or foreign objects to enter • Ne pas laisser pénétrer de liquide ni de corps this product. étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE RISCHIO DI DANNI MATERIALI E D'INVOLUCRO 材料损坏和高温外壳的危险性 SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Respetar las instrucciones de montaje, y en • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. PCB Mount DataSheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Chromium biphenyls diphenyl ethers (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.