CRYDOM DC100D60

PowerPlus DC • Optically Isolated MOSFET output • Ratings from 10A to 100A @ 72 VDC • AC and DC control • Relays are easily paralleled for higher-current applications • LED Status Indicator • Optional IP20 Cover • UL Recognized, CE and RoHS Compliant • PWM to 1K Hz PRODUCT SELECTION Control Voltage 10A 20A 40A 60A 80A 100A 4-32 VDC DC100D10 DC100D20 DC100D40 DC100D60 DC100D80 DC100D100 90-140 VAC DC100A10 DC100A20 DC100A40 DC100A60 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description 10A 20A 40A 60A 80A 100A Operating Voltage [Vdc] (2) 1-72 VDC 1-72 VDC 1-72 VDC 1-72 VDC 7-72 VDC 7-72 VDC Blocking Voltage 100 100 100 100 100 100 Rated Load Current [Adc] (3) 10 20 40 60 80 100 Minimum Load Current [mA] (4) 2.5 2.5 2.5 2.5 2.5 2.5 Maximum Surge Current [Adc] (10ms) 66 91 136 167 215 272 Maximum On-State Voltage Drop @ Rated Current [Vdc] 0.32 0.34 0.6 00.6 0.72 0.56 Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.15 0.15 0.15 0.15 0.15 0.15 Thermal Resistance Junction to Case (Rjc) [°C/W] 1.44 0.85 0.78 0.58 0.55 0.42 Maximum On-State Resistance @ Rated Current [RDS-ON][mOhms] 32 17 15 10 9 5.6 Maximum PWM [Hz] (5) 1K 1K 900 900 700 700 INPUT SPECIFICATIONS (1) Description DCxxxDxx DCxxxAxx Control Voltage Range 4-32 VDC 90-140 VAC Minimum Input Current @ min Control Voltage [mA] 11 11 Maximum Input Current @ max Control Voltage [mA] 12 13 Nominal Input Impedance Current Regulated Current Regulated Maximum Turn-On Time [msec] 0.075 10 Maximum Turn-Off Time [msec] 0.32 10 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance (@ 500 V DC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range (6) -30 to 80°C Ambient Storage Temperature Range -40 to 125 °C Housing Material Valox 420 SEO Black, UL 94 V-0 Weight (typical) (7) 2.65 oz (75g) Encapsulation (8) Epoxy Free Terminal Finish Electroless Nickel Recommended Terminal Screw Torque (6-32) [in lbs/Nm] 10/1.1 Recommended Terminal Screw Torque (8-32) [in lbs/Nm] 20/2.2 GENERAL NOTES 1) All parameters at 40°C and per section unless otherwise specified. 2) Maximum voltage is 100VDC 3) Heat sinking required, see derating curves. 4) Low current loads and high ambient temperature can affect turn-on time. 5) @ a minimum of 8VDC control. See PWM Derating Information page 3. 6) Maximum Ambient Operating Temperature for the AC control relays is 65°C. 7) Typical weight for the AC control relays is 2.99 oz/85g. 8) AC controlled relays contain thermal conductive epoxy. MECHANICAL SPECIFICATIONS WIRING DIAGRAM PWM DERATE INFORMATION AGENCY APPROVALS IEC 61000-4-2 Electrostatic Discharge Level 3, Criteria A IEC 61000-4-4 Electrically Fast Transients Level 3, Criteria A IEC 61000-4-5 Electrical Surges Level 3, Criteria A E116950 072312 THERMAL DERATE INFORMATION ANNEX - ENVIROMENTAL INFORMATION