CRYDOM DRA-CN024D240

DIN Rail Mount DataSheet AC DC DRACN Series • 6.2mm Din-Rail Mount (35 mm) SSR Assembly • Ratings 24VDC @ 3.5A, 48VDC @ 100mA and 240VAC @ 2A • UL & cUL recognized @ 40°C, 100K-Cycle Endurance Test (SSR Only) • AC output SSR is UL rated for Pilot Duty @ 240VAC • CE & RoHS Compliant • Yellow LED input status indicator • 5 & 24 VDC Control PRODUCT SELECTION Control Voltage 3.5 A 100 mA 2 A DRA-CN048D05 3-12 VDC DRA-CN024D05 DRA-CN240A05 15-30 VDC DRA-CN024D24 DRA-CN048D24 DRA-CN240A24 AVAILABLE OPTIONS Load Voltage Switching Mode 024D: 24 VDC, 3.5 A Blank: Zero Cross 048D: 48 VDC, 0.1 A Turn-On (AC Output Only) 240A: 240 VAC, 2 A R: Random Turn On Series (AC Output Only) DRA-CN 4 024D D Assembly Input Voltage 05: 05 VDC 24: 24VDC Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS DRA-CN024DXX DRA-CN048DXX DRA-CN240AXX Description 0-48 VDC Operating Voltage 0-24 VDC 24-250 VAC 100 mA Maximum Load Current @ 40°C (2) 3.5 A 2 A 1 Minimum Load Current [mA] 1 70 60 VDC Maximum Blocking Voltage 30 VDC 600 VAC 300 mA (10 ms) Maximum Surge Current [Apk] 9 A (10 ms) 120/115 A (16.6/20 ms) N.A. Maximum I²t for fusing 50/60Hz (1/2 cycle) [A² sec] N.A. 285/260 1.0 Typical On-State Voltage Drop @ Rated Current (V) 0.4 1.1 Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.001 0.001 4.0 500 Maximum PWM (Hz) (3) 500 N.A. Switch Configuration N.O. N.O. N.O. (1) INPUT SPECIFICATIONS for CN024 Description DRA-CN024D05 DRA-CN024D24 Control Voltage Range 3-12 VDC 15-30 VDC Minimum Turn-On Voltage 3.0 VDC 15 VDC Must Turn-Off Voltage 1.0 VDC 15 VDC Nominal Input Impedance 500 Ohm 2.67K Ohm Typical Input Current 10 mA @ 5.0 VDC 2.67K Ohm Typical Turn-On Time 120 μs 350 μs Typical Turn-Off Time 120 μs 80 μs Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. DIN Rail Mount DataSheet (1) INPUT SPECIFICATIONS for CN048 Description DRA-CN048D05 DRA-CN048D24 15-30 VDC Control Voltage Range 3-12 VDC Must Turn On Voltage 15 VDC 3.0 VDC Must Turn Off Voltage 1.0 VDC 5 VDC Nominal Input Impedance 833 Ohm 3.43K Ohm Typical Input Current 6 mA @ 5.0 VDC 7 mA @ 24 VDC 20 μs Typical Turn-On Time 20 μs Typical Turn-Off Time 130 μs 130 μs (1) INPUT SPECIFICATIONS for CN240 Description DRA-CN240A05 DRA-CN240A24 Control Voltage Range 3-12 VDC 15-30 VDC Must Turn On Voltage 3.0 VDC 15 VDC Must Turn Off Voltage 1.0 VDC 5 VDC Nominal Input Impedance 333 Ohm 3.43K Ohm Typical Input Current 15 mA @ 5.0 VDC 7 mA @ 24 VDC Typical Turn-On Time 1/2 Cycle 1/2 Cycle 1/2 Cycle Typical Turn-Off Time 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) (5) 2.5 KV Maximum Capacitance, Input/Output 1.5 pF Ambient Operating Temperature Range -25 to 60°C Ambient Storage Temperature Range -40 to 80°C Weight (typical) 0.067 lb (31g) Housing Material UL 94 V0 Overvoltage Category III Polution Degree 2 Degree of protection (SSR Encapsulation) IP67 Max. Torque (output screws) 5-7 in lb (0.56-0.8 Nm) Max. Wire Size (load side) 24-14 AWG Solid or Stranded GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) See derate curves for more information (3) Operating frequency above 500Hz will damage the SSR (DC output only). (4) Turn-on time for random turn-on version is 0.1msec (5) 3.75KV for CN048Dxx Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. DIN Rail Mount DataSheet MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] THERMAL DERATE INFORMATION DERATING CURVE: DRA-CN024DXX DERATING CURVE: DRA-CN048DXX No spacing Required 3.5 0.1 3.0 0.08 2.5 6.2 Spacing 2.0 0.06 No spacing 1.5 0.04 1.0 0.02 0.5 0 0 20 30 40 50 60 40 20 30 50 60 Ambient Temperature (ºC) Ambient Temperature (ºC) DERATING CURVE: DRA-CN240AXX 2 1.5 6.2 Spacing 1 No spacing 0.5 0 20 30 40 50 60 Ambient Temperature (ºC) Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amps) Load Current (Amps) Load Current (Amps) DIN Rail Mount DataSheet AGENCY APPROVALS AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E334072. AC output relay is UL rated for Pilot Duty @ 240VAC Rev. 052112 ACCESSORIES ID Marker Strips CNLB, CNLN, CNL2 Blank Strips Part no.: CNLB A package of 10 plastic strips comprising 10 individual unprinted markers which can be placed on sockets’ terminal block for easy identification during the use of multiple units. Numbered 1 to 10 Strips Part no.: CNLN A package of 10 plastic strips comprising 10 markers printed individual 1 to 10 which can be placed on sockets’ terminal block for easy identification during the use of multiple units. Numbered 1 to 10 Strips Part no.: CNL2 A package of 10 plastic strips comprising 10 markers printed individual 11 to 20 which can be placed on sockets’ terminal block for easy identification during the use of multiple units. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. DIN Rail Mount DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI 存在电击、 ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. EXPLOSION. • Eteindre • 在操作此设 • Desconectar • Spenga tutta • Disconnect all • Stellen Sie toutes les todos los l'alimentazione 备之前请先 jeglichen power before sources suministros de che fornisce 关闭电源。 installing or Strom ab, der d'énergie de energia a este questa working with dieses Gerät cet appareil equipo antes apparecchiatura 若不遵守这些说明， this equipment. versorgt, bevor avant de de trabajar prima di lavorare 可能会导致严重的 Sie an dem con este equipo. travailler a questa • Verify all Gerät Arbeiten 人身伤害甚至死亡。 dessus de cet apparecchiatura connections • Verificar todas durchführen appareil and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas i collegamenti • Vérifier tous Drehen auf turning on las tapas antes e sostituire connections, et Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse prima el equipo. couverts en überprüfen Failure to follow dell’accensione olace avant de und alle these El mettre sous Abdeckungen instructions will L'omissione di incumplimiento ersetzen. De non-suivi de result in death queste istruzioni de estas ces instructions or serious injury. provocherà la Unterlassung instrucciones provoquera la morte o dieser puede provocar mort ou des lesioni serie Anweisungen la muerte o lésions sérieuses können zum lesiones serias. sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 GEFAHR VON MATERIALSCHÄDEN UND RISQUE DE DOMMAGE MATERIEL ET DE RISK OF MATERIAL DAMAGE AND HOT SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG ENCLOSURE • Die Seitenwände können heiß sein. Lassen Sie • Les panneaux latéraux du produit peuvent être • The product's side panels may be hot, allow das Produkt abkühlen, bevor Sie es berühren. chauds. Laisser le produit refroidir avant de le the product to cool before touching. • Beachten Sie die Montageanweisungen, toucher. • Follow proper mounting instructions including • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder torque values. Fremdkörper in das Produkt ein. notamment les couples de serrage. • Do not allow liquids or foreign objects to enter • Ne pas laisser pénétrer de liquide ni de corps this product. étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE RISCHIO DI DANNI MATERIALI E D'INVOLUCRO 材料损坏和高温外壳的危险性 SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Respetar las instrucciones de montaje, y en • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. DIN Rail Mount DataSheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Chromium biphenyls diphenyl ethers (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.