CRYDOM DRA3P48B2R

DIN Rail Mount Contactor Datasheet DRA3P Series • 2.4 & 4.2 Amp rated Solid State Contactor • Load voltage range of 48-510 VAC, 3-Phase • Fits standard 35mm DIN-RAIL • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or instantaneous turn-on (inductive loads) output • cUL Recognized, IEC Rated, CE, CCC & RoHS Compliant, Horsepower Rated • Built in Overvoltage Protection Start / Stop PRODUCT SELECTION Control Voltage 2.4 A 4.2 A 4-6 VDC Control DRA3P48D2 DRA3P48D4 18-28 VDC Control DRA3P48E2 DRA3P48E4 36-60 VAC Control DRA3P48C2 DRA3P48C4 90-140 VAC Control DRA3P48B2 DRA3P48B4 200-265 VAC Control DRA3P48A2 DRA3P48A4 AVAILABLE OPTIONS Rated Load Current 2: 2.4 Amp/ 1HP @ 480 VAC Controlled Legs Operating Voltage 4: 4.2 Amp/ Blank: 3 Legs Series 48: 48-510 VAC 2HP @ 480 VAC 2: 2 Legs DRA 3P 48 D 4 R 2 Function Control Voltage Switching Type 3P: 3 Phase D: 4-6 VDC Blank: Zero Voltage Turn-On E: 18-28 VDC R: Instantaneous Turn-On A: 200-265 VAC B: 90-140 VAC Required for valid part number C: 36-60 VAC For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS AC Output Description 2.4 A 4.2 A Operating Voltage (47-63Hz) [Vrms] 48-510 48-510 Rated Operating Voltage (Vrms) 480 480 Transient Overvoltage [Vpk] (2) 1200 1200 Maximum Resistive Load Current UL/AC51 [Arms] (3, 8) 2.4/2.4 4.2/2.4 Maximum Motor Load Current UL/AC53 [Arms] (3, 4) 2.1/2.1 3.4/2.1 Minimum Load Current [Arms] 0.15 0.15 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 per Channel 1.15 per Channel Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] 285/300 285/300 Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] 410/375 410/375 HP/IEC 60947 Rating @ 240V, 40°C [HP/KW] (5) 0.5/0.37 0.75/0.37 HP/IEC 60947 Rating @ 380V, 40°C [HP/KW] (6) 1.0/0.75 1.5/0.75 (7) HP/IEC 60947 Rating @ 480V, 40°C [HP/KW] 1.0/0.75 2.0/0.75 Minimum Power Factor (with Maximum Load) 0.5 0.5 Min/Max stranded/solid wire [AWG] 24/10 24/10 Min/Max stranded/solid wire [IEC mm²] 0.5-4.0 0.5-4.0 Load Terminal Screw Torque Range: 12.0 in lb (1.36 Nm) 12.0 in lb (1.36 Nm) Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. L1 L2 L3 AC LINE 230VAC CONTROL -A1 +A2 LOAD T1 T2 T3 DIN Rail Mount Contactor Datasheet (1) INPUT SPECIFICATIONS Description DRA3P48Dx DRA3P48Ex DRA3P48Cx DRA3P48Bx DRA3P48Ax Control Voltage Range 4-6 VDC 18-28 VDC 36-60 VAC 90-140 VAC 200-265 VAC Rated Input Control Voltage 5 VDC 24 VDC 48 VAC 120 VAC 230 VAC Minimum Turn-On Voltage 4 VDC 18 VDC 36 VAC 90 VAC 200 VAC Minimum Turn-Off Voltage 2 VDC 4 VDC 10 VAC 20 VAC 60 VAC Minimum Input Current [mA] 17 15 7.5 5 4.5 Maximum Input Current [mA] 35 25 13.5 8 5.7 Nominal Input Impedance [Ohms] 120 1.2K 4.2K 16K 46K Maximum Turn-On Time (9) 1/2 Cycle 1/2 Cycle 20 ms 20 ms 20 ms Maximum Turn-Off Time 1/2 Cycle 1/2 Cycle 30 ms 30 ms 30 ms Min/Max stranded/solid wire [AWG] 24/12 24/12 24/12 24/12 24/12 Min/Max stranded/solid wire [IEC mm²] 0.5-2.5 0.5-2.5 0.5-2.5 0.5-2.5 0.5-2.5 Control Terminal Screw Torque Range: 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input to Output (50/60Hz) 3750Vrms 9 Minimum Insulation Resistance (@ 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 20 pF Ambient Operating Temperature Range -20ºC to 60ºC Ambient Storage Temperature Range -40ºC to 85ºC LED Status Indicator for Control Input On: Green Weight (typical) 4.75 oz. (135g) Housing Material (bottom cover) PVC Class V0 (UL94) Housing Material (end pieces) Polyamide Class V0 (UL94) GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) Relay will self trigger between 900-1200Vpk. Not Suitable for capacitive loads. (3) For AC control AC53 maximum current is 1.6 A (4) Mounted in the Vertical position (Din Rail in horizontal position). (5) For AC control, rating is ½HP/0.25KW (6) For AC control, rating is1HP/0.37KW (7) For AC control, rating is 1HP/0.55KW (8) Resistive Load Current rating for DRA3P48x4 (A,B & C suffix only) is 3.4 A (9) Turn-on time for DC control instantaneous turn-on versions is 0.1 msec. (10) Three Controlled legs versions only. Otherwise L2-T2 are connected internally. MECHANICAL SPECIFICATIONS (10) Tolerances: ± 0.02 in / 0.5 mm - All dimensions are in: inches [millimeters] SSR-AC-4A 480V 4.2A 2HP@480VAC 2.91 [73.9] 2.22 ASSEMBLED IN MEXICO [56.3] 1102 R DRA3P48E4 1.48 [37.7] 1.37 3.53 [34.9] [89.6] 1.77 [44.9] Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DIN Rail Mount Contactor Datasheet WIRING DIAGRAM T1 T2 ~/- A T3 ~/+ A (10) T1 T1 L1 T2 L2 T2 T3 L3 T3 T1 MOTOR T2 T3 BLOCK DIAGRAM INPUT CONTROL CIRCUIT L1 Photo Overvoltage ~/- A LED Trigger PHASE A receiver Protection T1 (10) L2 AC/DC Photo Overvoltage CONTROL Trigger PHASE B LED receiver Protection T2 INPUT STATUS INDICATOR L3 Photo Overvoltage ~/+ A LED Trigger PHASE C receiver Protection T3 THERMAL DERATE INFORMATION 5.0 4.0 3.0 DRA3P48x4 2.0 DRA3P48x2 1.0 0.0 0 10 20 30 40 50 60 Ambient Temperature (°C) Ratings based on single or multiple relays and no spacing between units except AC control which is 3.4 A rating 45mm spacing must be used. AGENCY APPROVALS Agency Approvals E116949 (Except DRA3P48xxx2) Rev. 021716 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. Resistive Load Current (Amps) DIN Rail Mount Contactor Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI 存在电击、 ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. EXPLOSION. • 在操作此设 • Desconectar • Eteindre • Spenga tutta • Disconnect all • Stellen Sie todos los toutes les l'alimentazione 备之前请先 power before jeglichen suministros de sources che fornisce 关闭电源。 installing or Strom ab, der energia a este d'énergie de questa working with dieses Gerät cet appareil apparecchiatura equipo antes 若不遵守这些说明， this equipment. versorgt, bevor avant de prima di lavorare de trabajar Sie an dem 可能会导致严重的 travailler con este equipo. a questa • Verify all Gerät Arbeiten 人身伤害甚至死亡。 dessus de cet apparecchiatura connections • Verificar todas durchführen appareil and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima überprüfen Failure to follow dell’accensione olace avant de und alle these El mettre sous Abdeckungen instructions will L'omissione di incumplimiento ersetzen. result in death De non-suivi de queste istruzioni de estas or serious injury. ces instructions provocherà la Unterlassung instrucciones provoquera la morte o dieser puede provocar mort ou des Anweisungen lesioni serie la muerte o lésions sérieuses können zum lesiones serias. sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND RISK OF MATERIAL DAMAGE AND HOT SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG ENCLOSURE • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie • The product's side panels may be hot, allow chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. the product to cool before touching. toucher. • Beachten Sie die Montageanweisungen, • Follow proper mounting instructions including • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder torque values. notamment les couples de serrage. Fremdkörper in das Produkt ein. • Do not allow liquids or foreign objects to enter • Ne pas laisser pénétrer de liquide ni de corps this product. étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Respetar las instrucciones de montaje, y en • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DIN Rail Mount Contactor Datasheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Chromium biphenyls diphenyl ethers (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.