CRYDOM DRA3R48B2

DIN Rail Mount Contactor Datasheet DRA3R Series • Three Phase Motor Reversing Contactor • Ratings of 2.4 & 4.2 Amps • Load voltage range of 48-510 VAC, 3-Phase • Fits standard 35mm DIN-RAIL • LED input status indicator, Forward (green), Reverse (yellow) • AC or DC control • cUL Recognized, IEC Rated, CE, CCC & RoHS Compliant, Horsepower Rated • Built in Overvoltage Protection Start / Stop Reversing PRODUCT SELECTION Control Voltage 2.4A 4.2A 4-6 VDC Control DRA3R48D2, DRA3R40D2 DRA3R48D4, DRA3R40D4 18-28 VDC Control DRA3R48E2, DRA3R40E2 DRA3R48E4, DRA3R40E4 36-60 VAC Control DRA3R48C2, DRA3R40C2 DRA3R48C4, DRA3R40C4 90-140 VAC Control DRA3R48B2, DRA3R40B2 DRA3R48B4, DRA3R40B4 200-265 VAC Control DRA3R48A2, DRA3R40A2 DRA3R48A4, DRA3R40A4 AVAILABLE OPTIONS Operating Voltage Rated Load Current 2: 2.4 Amp/1HP @ 480 VAC 40: 48-415 VAC Series 48: 48-510 VAC 4: 4.2 Amp/2HP @ 480 VAC DRA 3R 48 D 4 Function Control Voltage 3R: Motor Reverser D: 4-6 VDC E: 18-28 VDC A: 200-265 VAC B: 90-140 VAC Required for valid part number C: 36-60 VAC For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS AC Output Description DRA3R40xx DRA3R48xx Operating Voltage (47-63Hz) [Vrms] 48-415 48-510 Rated Operating Voltage [Vrms] (3, 4) 400 480 Transient Overvoltage [Vpk] 1200 1600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 3.0 3.5 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 per channel 1.15 per channel (1) OUTPUT SPECIFICATIONS AC Output Description DRA3R4xx2 DRA3R4xx4 Minimum Load Current [Arms] 0.15 0.15 Maximum Resistive Load Current (UL508,AC51) [Arms] (2) 2.4/2.4 4.2/3.5 Maximum Motor Load Current (UL508,AC53) [Arms] (2) 2.1/2.1 3.4/3.4 Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] 285/300 285/300 Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] 410/375 410/375 HP/IEC 60947 Rating @ 240VAC, 40°C [HP/KW] 1/2 / 0.37 1.0 / 0.75 HP/IEC 60947 Rating @ 400VAC, 40°C [HP/KW] 1.0 / 0.75 1.5 / 1.1 HP/IEC 60947 Rating @ 480VAC, 40°C [HP/KW] 1.0 / 0.75 2.0 / 1.5 Minimum Power Factor (with Maximum Load) 0.5 0.5 Min/Max stranded/solid wire [AWG] 24/10 24/10 Min/Max stranded/solid wire [AWG] 24/10 24/10 Load Terminal Screw Torque Range: 12.0 in lb (1.36 Nm) 12.0 in lb (1.36 Nm) Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. L1 L2 L3 AC LINE 5VDC CONTROL +F +R LOAD T1 T2 T3 DIN Rail Mount Contactor Datasheet (1) INPUT SPECIFICATIONS Description DRA3R4xDx DRA3R4xEx DRA3R4xCx DRA3R4xBx DRA3R4xAx Control Voltage Range 4-6 VDC 18-28 VDC 36-60 VAC 90-140 VAC 200-265 VAC Rated Input Control Voltage 5 VDC 24 VDC 48 VAC 120 VAC 230 VAC Minimum Turn-On Voltage 4 VDC 18 VDC 36 VAC 90 VAC 200 VAC Minimum Turn-Off Voltage 2 VDC 4 VDC 10 VAC 20 VAC 60 VAC Minimum Input Current [mA] 15 15 6 5 5.5 Maximum Input Current [mA] 30 20 10 8 7.7 Nominal Input Impedance [ohms] 100 1.2 K 4.8 K 16.4 K 36 K Maximum Turn-On Time [msec] 120 120 130 130 130 Maximum Turn-Off Time [msec] 10 10 20 20 20 Min/Max stranded/solid wire [AWG] 24/12 24/12 24/12 24/12 24/12 Min/Max stranded/solid wire [IEC mm²] 0.5-2.5 0.5-2.5 0.5-2.5 0.5-2.5 0.5-2.5 Control Terminal Screw Torque Range: 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) 4.3 in lb (0.485 Nm) (1) GENERAL SPECIFICATIONS Description Parameters Maximum Capacitance, Input/Output 20 pF Dielectric Strength, Input/Output (50/60Hz) 4000Vrms 9 Minimum Insulation Resistance (@ 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 20 pF Ambient Operating Temperature Range -20ºC to 60ºC Ambient Storage Temperature Range -30ºC to 85ºC LED Status Indicator for Control Input Forward: Green / Reverse: Yellow Weight (typical) 6.5 oz. (185g) Housing Material (bottom cover) PVC Class V0 (UL94) Housing Material (end pieces) Polyamide Class V0 (UL94) GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) Mounted in the Vertical position (Din Rail in horizontal position). (3) Internal overvoltage protection will activate between 600-750Vpk for DRA3R40xx (4) Internal overvoltage protection will activate between 750-900Vpk for DRA3R48xx MECHANICAL SPECIFICATIONS Tolerances: ± 0.02 in / 0.5 mm - All dimensions are in: inches [millimeters] SSR-DC-4 480V 4.2A 2HP@480VAC 2.91 [73.9] ASSEMBLED 2.22 IN MEXICO 1102 [56.3] R DRA3R48D4 1.48 [37.7] 2.04 [51.7] 3.53 [89.6] 2.43 [61.7] Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. - DIN Rail Mount Contactor Datasheet WIRING DIAGRAM S1 F ~/+ -/~ - Source R S2 T1 L1 T2 MOTOR L2 T3 L3 BLOCK DIAGRAM FORWARD INPUT STATUS CONTROL INDICATOR CIRCUIT L1 Photo Overvoltage LED Trigger F receiver Protection T2 L2 Photo Overvoltage Trigger LED receiver Protection T1 - INTERLOCK Photo Overvoltage LED Trigger receiver Protection REVERSE STATUS INDICATOR L3 Photo Overvoltage LED Trigger R receiver Protection T3 THERMAL DERATE INFORMATION 5.0 4.0 3.0 DRA3R4xx4 2.0 DRA3R4xx2 1.0 0.0 0 10 20 30 40 50 60 Ambient Temperature (°C) AGENCY APPROVALS Agency Approvals E116949 (Except DRA3R40xx) Rev. 071614 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. Resistive Load Current (Amps) DIN Rail Mount Contactor Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI 存在电击、 ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. EXPLOSION. • 在操作此设 • Desconectar • Eteindre • Spenga tutta • Disconnect all • Stellen Sie todos los toutes les l'alimentazione 备之前请先 power before jeglichen suministros de sources che fornisce 关闭电源。 installing or Strom ab, der energia a este d'énergie de questa working with dieses Gerät cet appareil apparecchiatura equipo antes 若不遵守这些说明， this equipment. versorgt, bevor avant de prima di lavorare de trabajar Sie an dem 可能会导致严重的 travailler con este equipo. a questa • Verify all Gerät Arbeiten 人身伤害甚至死亡。 dessus de cet apparecchiatura connections • Verificar todas durchführen appareil and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima überprüfen Failure to follow dell’accensione olace avant de und alle these El mettre sous Abdeckungen instructions will L'omissione di incumplimiento ersetzen. result in death De non-suivi de queste istruzioni de estas or serious injury. ces instructions provocherà la Unterlassung instrucciones provoquera la morte o dieser puede provocar mort ou des Anweisungen lesioni serie la muerte o lésions sérieuses können zum lesiones serias. sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND RISK OF MATERIAL DAMAGE AND HOT SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG ENCLOSURE • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie • The product's side panels may be hot, allow chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. the product to cool before touching. toucher. • Beachten Sie die Montageanweisungen, • Follow proper mounting instructions including • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder torque values. notamment les couples de serrage. Fremdkörper in das Produkt ein. • Do not allow liquids or foreign objects to enter • Ne pas laisser pénétrer de liquide ni de corps this product. étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Respetar las instrucciones de montaje, y en • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DIN Rail Mount Contactor Datasheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Chromium biphenyls diphenyl ethers (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.