CRYDOM ED10C5

Plug-in DataSheet ED Series • DC output Solid State Relay in an Industry standard EMR plug in package • Ratings of 5 Amps • Load voltage range of 1-48 and 1-80 VDC • Fits standard DIN rail & PCB mountable sockets • LED input status indicator • AC or DC control • cUL Recognized, IEC Rated, CE & RoHS Compliant • Motor Controller Rated PRODUCT SELECTION Control Voltage 5 A 5 A 5-15 VDC Control ED06D5 ED10D5 18-32 VDC Control ED06C5 ED10C5 48-72 VDC Control ED06F5 ED10F5 18-36 VAC Control ED06E5 ED10E5 90-140 VAC Control ED06B5 ED10B5 AVAILABLE OPTIONS Operational Current Output Voltage 5: 5 Amps 06: 1-48 VDC 10: 1-80 VDC Series ED 06 C 5 Control Voltage B: 90-140 VAC C: 18-32 VDC D: 5-15 VDC E: 18-36 VAC F: 48-72 VDC Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS DC Output Description 5 A 5 A Operating Voltage [VDC] (2) 1-48 1-80 Maximum Load Current, UL 508 Resistive, [Adc] 5 5 Maximum Load Current, IEC 60947-4-1 DC-1, DC-3 [Adc, FLA] 5 5 Maximum Load Current UL 508 Motor Controller [FLA] (3) 2.0 2.0 Minimum Load Current [mAdc] 2.5 2.5 Maximum Off-State Leakage Current @ Rated Voltage [µA] 20 20 Maximum On-State Voltage Drop @ Rated Current and 40°C [Vdc] 0.3 0.3 Maximum Surge Current (10ms) [Adc] 60 60 Maximum PWM [Hz] (4) 500 500 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Plug-in DataSheet (1) INPUT SPECIFICATIONS Description EDxxD5 EDxxC5 EDxxF5 EDxxE5 EDxxB5 Control Voltage Range 5-15 VDC 18-32 VDC 48-72 VDC 18-36 VAC 90-140 VAC Minimum Turn-On Voltage 5 VDC 18 VDC 48 VDC 18 VAC 90 VAC Minimum Turn-Off Voltage 1.3 VDC 2 VDC 4 VDC 4 VAC 11 VAC Maximum Reverse Voltage 3 VDC 3 VDC 3 VDC N/A N/A Minimum Input Current [mA] 11 10.7 10.8 12 7.3 Maximum Input Current [mA] 42.8 19.7 16.3 25.3 10.9 Nominal Input Impedance [ohms] 350 1.6K 4.4K 1.5K 12.5K Maximum Turn-On Time [msec] (4) 0.6 0.6 0.6 0.6 0.6 Maximum Turn-Off Time [msec] 0.3 0.3 0.3 0.3 0.3 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance (@ 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30ºC to 80ºC Ambient Storage Temperature Range -40ºC to 125ºC Weight (typical) 0.71 oz. (30 g) Maximum Humidity 85% non-condensing Housing Material PBT 30% GF, UL94 V-0 Terminals Material Copper w/Sulfamet Nickel finish GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Maximum Rated voltage for ED06xx is 60 VDC and 100 VDC for ED10xx 3) Maximum Motor Controller current is 1.5 FLA for EDxxB5 and EDxxE5 4) PWM does not apply to EDxxB5 and EDxxE5 THERMAL DERATE INFORMATION DERATING CURVE: EDxxx5 6.0 5.0 4.0 3.0 2.0 1.0 0 10 20 30 40 50 60 70 80 Ambient Temperature (ºC) Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amps) Plug-in DataSheet Above curve is based on a minimum spacing between parts of 16mm. Maximum current @ 0mm spacing is 3A. Derating Value: ED06x5, D10x5 = 0.125A per mm Derating based on Relay air gap: Example: 10mm spacing with a ED06D5 SSR 1.- Subtract spacing from the minimum required spacing of the part (16mm) to get the correction value. 16-10=6 2.- Multiply air gap derating value found above with correction value. 0.125 x 7 = 0.75A Now using this final number we can figure out what the maximum current the relay can carry with 10mm spacing @ 60°C Ambient. 3.- using the Ambient Derating Curve above find the current for the 5A model @ 60°C. In this case that calue is 2.5A. 4.- Subtract the value above (0.75A) from 2.5A. 2.5-0.75 = 1.75A The maximum current you can switch with the ED06D5 with a 10mm air gap between relays @ 60°C ambient is 1.75A WIRING DIAGRAM LOAD A -VDC 4 -VDC 1/A1 Control Circuit + +VDC 5/A2 3+ LOAD B +VDC LED LOAD CAN BE WIRED IN POSITION A or B Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Plug-in DataSheet MECHANICAL SPECIFICATIONS DC Output: 5 Amps AC Control: B, E suffix 1.47 DC Output: 5 Amps [37.4] AC Control: 1.10 .99 C,D & F suffix [27.9] .82 [25.0] [20.8] .20 .02 .24 [5.1] .19 [0.5] [6.1] .21 [4.8] .30 [5.3] [7.6] .10 .12 [2.5] [3.0] .39 .50 [9.9] 1.14 [12.7] Tolerances: ±0.02 in / 0.5 mm [29.0] All dimensions are in: inches [millimeters] ACCESSORIES ED Series Accessories DRSED PCBSED DIN Rail Mountable Socket PC Board Mountable Socket Part no.: DRSED Part no.: PCBSED Fingersafe IP10 DIN rail mountable socket to PC Board mountable socket for ED series mount ED series relays onto standard 35 mm relays. Rated at 250 V AC/DC, 12 Amps. DIN rail. Rated at 250 V AC/DC, 12 Amps. The Suggested Pin-out hole diameter: 1.0 mm DRSED includes M3 Combo screws. AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge Level 1 – Criteria A IEC 61000-4-4 : Electrically Fast Transients Level 2 – Criteria B IEC 61000-4-5 : Electrical Surges Level 3 – Criteria B E116949 Rev. 081017 ECN 20296 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Plug-in DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI 存在电击、 ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. EXPLOSION. • Eteindre • Spenga tutta • 在操作此设 • Desconectar • Disconnect all • Stellen Sie toutes les l'alimentazione todos los 备之前请先 jeglichen power before sources che fornisce suministros de 关闭电源。 installing or Strom ab, der d'énergie de questa energia a este working with dieses Gerät cet appareil apparecchiatura equipo antes 若不遵守这些说明， this equipment. versorgt, bevor avant de prima di lavorare de trabajar 可能会导致严重的 Sie an dem con este equipo. travailler a questa • Verify all Gerät Arbeiten 人身伤害甚至死亡。 dessus de cet apparecchiatura connections • Verificar todas durchführen appareil and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas i collegamenti • Vérifier tous Drehen auf turning on e sostituire las tapas antes connections, et Energie alle power. tutte le coperture de energizer remettre tous Anschlüsse prima el equipo. couverts en überprüfen Failure to follow dell’accensione olace avant de und alle these El mettre sous Abdeckungen L'omissione di instructions will incumplimiento ersetzen. De non-suivi de queste istruzioni result in death de estas ces instructions provocherà la or serious injury. Unterlassung instrucciones provoquera la morte o dieser puede provocar mort ou des lesioni serie Anweisungen la muerte o lésions sérieuses können zum lesiones serias. sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND RISK OF MATERIAL DAMAGE AND HOT SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG ENCLOSURE • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie • The product's side panels may be hot, allow chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. the product to cool before touching. toucher. • Beachten Sie die Montageanweisungen, • Follow proper mounting instructions including • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder torque values. notamment les couples de serrage. Fremdkörper in das Produkt ein. • Do not allow liquids or foreign objects to enter • Ne pas laisser pénétrer de liquide ni de corps this product. étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE RISCHIO DI DANNI MATERIALI E D'INVOLUCRO 材料损坏和高温外壳的危险性 SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Respetar las instrucciones de montaje, y en • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Plug-in DataSheet ANNEX - ENVIRONMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Chromium biphenyls diphenyl ethers (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.