CRYDOM EZE240D18R

Panel Mount Datasheet EZ Series • Compact design for low-profile applications; Ratings from 5 A to 18 A @ 600 VAC • SCR output for heavy industrial loads • AC or DC control • 1/4" fast-on terminals for easy installation • UL/CSA/VDE Approved, CE Compliant to EN60950-1 PRODUCT SELECTION 5 A 12 A Control Voltage 18 A 3-15 VDC EZ240D5 EZ240D12 EZ240D18 EZE240D12 EZE240D18 15-32 VDC 90-140 Vrms EZ240A12 EZ240A18 EZE240A12 EZE240A18 18-36 Vrms EZ480D12 4-15 VDC EZ480D18 EZE480D18 15-32 VDC EZE480D12 90-140 Vrms EZ480A18 EZ480A12 EZE480A18 18-36 Vrms EZE480A12 AVAILABLE OPTIONS Input Range Control Voltage Internal Snubber Blank: Standard Input D: DC 3-15 V (4-15 V for Blank: Not Included E: 18-36 VAC (AC Input) 480 V) S: Included (EZ240 only) Series 15-32 VDC (DC Input) A: AC 90-140 V E 240 A 12 R EZ S Switching Mode Load Current Operating Voltage Blank: Zero Voltage Turn-On 5: 5 Amps (EZ240D 240: 24-280 VAC -10: Random Turn-On 480: 48-660 VAC suffix only) 12: 12 Amps 18: 18 Amps Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description 12 A 18 A 12 A 18 A 5 A Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 24-280 48-660 48-660 600 600 1200 1200 Transient Overvoltage [Vpk] 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] (4) 0.1 0.1 0.1 0.1 0.1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec] (2) 500 500 500 500 500 Maximum Load Current [Arms] (3) 5 12 18 12 18 150 150 150 150 Minimum Load Current [Arms] 150 143/150 191/200 143/150 191/200 Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 38/40 1.5 1.5 1.5 1.5 1.5 Maximum On-State Voltage Drop @ Rated Current [Vpk] 2 2 1.1 2 1.1 Thermal Resistance Junction to Case (Rjc) [°C/W] 102/93 102/93 182/166 102/93 182/166 Maximum 1/2 Cycle I²t for Fusing (50/60 Hz) [A² sec] 0.5 0.5 0.5 0.5 0.5 Minimum Power Factor (with Maximum Load) Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. SNUBBER SNUBBER Panel Mount Datasheet INPUT SPECIFICATIONS (1) Description EZ240Dxx EZ480Dxx EZExxxDxx EZxxxAxx EZExxxAxx Control Voltage Range 3-15 VDC 4-15 VDC 15-32 VDC 90-140 Vrms 18-36 Vrms Minimum Turn-On Voltage 3.0 VDC 4.0 VDC 90.0 Vrms 18.0 Vrms 15.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC 10.0 Vrms 2.0 Vrms Nominal Voltage 5.0 VDC 5.0 VDC 24 VDC 120 Vrms 24 Vrms Typical Input Current @ Nominal Voltage 15 mAdc 15 mAdc 15 mAdc 10 mA 10 mA Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 10.6 k Ohm 1.8 k Ohm Maximum Turn-On Time [msec] (5) 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle 1/2 Cycle (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance (@ 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80°C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 1.5 oz (43 g) Encapsulation Thermally Conductive Epoxy Terminals .25" Fastons Mounting Screw Torque (8-32 UNC screw) [in lbs/Nm] 8-14/1.1-1.5 GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Heat sinking required, see derating curves. (4) Off- state leakage for snubbered version (suffix S, 240V version only) is 10.0mArms (5) Turn-on time for random turn-on versions is 0.1 msec (DC Control Models). WIRING DIAGRAM A LOAD 1 AC -DC 4 TRIGGER * CIRCUIT +DC LOAD AC 3 2 B *Snubber option offered in 240 V version only. Load can be wired in location A or B A 1 LOAD AC AC 4 TRIGGER AC/DC CIRCUIT * CONVERTER AC LOAD 3 2 AC B *Snubber option offered in 240 V version only. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Panel Mount Datasheet 2.63 MECHANICAL SPECIFICATIONS .197 DIA. (66.8) (2 PLCS) 2.24 Tolerances: ±0.02 in / 0.5 mm (56.9) All dimensions are in: inches [millimeters] 1.50 1.00 (38.1) .49 (25.4) (12.4) FASTON TERMINAL 1.73 .40 (43.9) .250 X .032 (10.2) 4 PLCS. .12 .95 (3.0) (24.1) THERMAL DERATE INFORMATION 2 ºC/W 4 ºC/W 5 ºC/W 6 ºC/W 10 ºC/W NO HEATSINK NO HEATSINK 5 A 12 A 15 6 112 5 110 10 4 116 115 3 120 5 2 120 1 124 2 4 6 8 10 12 20 40 60 80 1 2 3 4 5 10 20 40 60 80 Load Current [Arms] Max Ambient Temp. [˚C] Load Current [Arms] Max Ambient Temp. [˚C] 18 A 18 112 2 ºC/W 5 ºC/W 12 NO HEATSINK 116 120 6 124 3 6 9 12 15 18 20 40 60 80 Load Current [Arms] Max Ambient Temp. [˚C] AGENCY APPROVALS Agency Approvals Designed in accordance with the requirements of IEC 62314 EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: LR81689 10139 UG (240 VDC Control Only) E116950 Rev. 090517 ECN 20309 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Power Dissipation Power Dissipation [W] Base Plate Temp [˚C] Power Dissipation [W] Base Plate Temp [˚C] Base Plate Temp [˚C] Panel Mount Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI 存在电击、 ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. EXPLOSION. • Eteindre • 在操作此设 • Desconectar • Spenga tutta • Disconnect all • Stellen Sie toutes les todos los l'alimentazione 备之前请先 power before jeglichen sources suministros de che fornisce 关闭电源。 installing or Strom ab, der energia a este d'énergie de questa working with dieses Gerät equipo antes cet appareil apparecchiatura 若不遵守这些说明， this equipment. versorgt, bevor de trabajar avant de prima di lavorare 可能会导致严重的 Sie an dem con este equipo. travailler a questa • Verify all Gerät Arbeiten 人身伤害甚至死亡。 dessus de cet apparecchiatura connections • Verificar todas durchführen appareil and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse prima el equipo. couverts en überprüfen Failure to follow dell’accensione olace avant de und alle these El mettre sous Abdeckungen instructions will L'omissione di incumplimiento ersetzen. De non-suivi de result in death queste istruzioni de estas ces instructions or serious injury. provocherà la Unterlassung instrucciones provoquera la morte o dieser puede provocar mort ou des lesioni serie Anweisungen la muerte o lésions sérieuses können zum lesiones serias. sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND RISK OF MATERIAL DAMAGE AND HOT SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG ENCLOSURE • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie • The product's side panels may be hot, allow chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. the product to cool before touching. toucher. • Beachten Sie die Montageanweisungen, • Follow proper mounting instructions including • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder torque values. notamment les couples de serrage. Fremdkörper in das Produkt ein. • Do not allow liquids or foreign objects to enter • Ne pas laisser pénétrer de liquide ni de corps this product. étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE RISCHIO DI DANNI MATERIALI E D'INVOLUCRO 材料损坏和高温外壳的危险性 SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Respetar las instrucciones de montaje, y en • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Panel Mount Datasheet ANNEX - ENVIRONMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Chromium biphenyls diphenyl ethers (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.