CRYDOM HDC200D160H

HDC Series • Ratings of 120A and 160A @ 150VDC • LED Status Indicator • Heavy Duty Stud Terminals • AC or DC control • µS Turn-On and Off times • Low On-State Voltage Drop • PWM to 1K Hz PRODUCT SELECTION Control Voltage 120A 160A 4.5-32 Vdc HDC200D120 HDC200D160 90-140 Vac HDC200A120 HDC200A160 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description 120A 160A Operating Voltage [Vdc] 7-150 7-150 Blocking Voltage [Vdc] 200 200 Rated Load Current [Arms] (2) 120 160 Minimum Load Current [mA] 2.5 2.5 Maximum Surge Current (10ms) [Adc] 1200 1600 Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.2 0.2 Maximum On-State Voltage Drop @ Rated Current [Vdc] 0.72 0.64 Thermal Resistance Junction to Case (Rjc) [°C/W] 0.25 0.23 Maximum On-State Resistance @ Rated Current (RDS-ON) [mOhms] 6.0 4.0 Wire Size max (solid/stranded) [AWG/ IEC mm²] 2/0 / 67.4 2/0 / 67.4 Output Terminal Nut Torque Range [in lb (Nm) 225-300 (25.4-33.9) 225-300 (25.4-33.9) Maximum PWM (Hz) (3) 1000 1000 INPUT SPECIFICATIONS (1) Description HDCxxD HDCxxA Control Voltage Range 4.5-32 Vdc 90-140 VAC Must Turn-Off Voltage 4.2 VDC 35 VAC Minimum Input Current @ Minimum Voltage (for on-state) 23 mA 31 mA Maximum Input Current @ Maximum Voltage 45 mA 33 mA Nominal Input Impedance Current Regulated Current Regulated Maximum Turn-On Time at min voltage 92 µs 6 ms Maximum Turn-On Time at max voltage 12.0 µs 4 ms Maximum Turn-Off Time at min voltage 195 µs 9.2 ms Maximum Turn-Off Time at max voltage 405 µs 9.2 ms LED Status Indicator (Color) Green Green Terminal Type / size in (mm) QC / 0.187 (4.75) QC / 0.187 (4.75) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance (@ 500 V DC) 10 Ohm Ambient Operating Temperature Range -30 to 80 °C Ambient Storage Temperature Range -40 to 125 °C Maximum Humidity 85% non-condensing Weight (typical) lbs/grams 0.75/340.2 Housing Material PBT 30% GF, UL 94 V-0 SSR Mounting Torque Range [in lbs/Nm] 18-20 (2-2.2) Baseplate Material Aluminum Encapsulation Thermal Conductive Epoxy RoHS Exemption #’s None GENERAL NOTES 1) All parameters at 40°C unless otherwise specified. 2) Heat sinking required, see derating curves. 3) See PWM Derating Chart. WIRING DIAGRAM MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION PWM DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge: Level 3 (Criteria A) IEC 61000-4-4 : Electrically Fast Transients: Level 3 (Criteria A) IEC 61000-4-5 : Electricsl Surges: Level 3 (Criteria A) Rev. 072312 ACCESSORIES ANNEX - ENVIROMENTAL INFORMATION