CRYDOM MS11CXE240D5

Series MS11-CMX 3 -10 Amp 0-200 Vdc DC Output DC output SPST-NO solid state relays DIN Rail Mount (TS 35) use MOSFET output for high switching MOSFET Output capabilities in a DIN Rail (TS-35) mount air-cooled package. Extra Low On State Resistance Input Status LED MODEL NO. MS11-CMX60D5 MS11-CMX60D10 MS11-CMX100D6 MS11-CMX200D3 INPUT SPECIFICATIONS 1 Control Voltage Range 5-10 Vdc 5-10 Vdc 5-10 Vdc 6-10 Vdc Nominal Input Impedance 300 Ohm 300 Ohm 300 Ohm 300 Ohm 12 mA 12 mA 12 mA 12 mA Typical Input Current @ 5 Vdc Must Turn On Voltage 5 Vdc 5 Vdc 5 Vdc 6 Vdc Must Turn Off Voltage 1.0 Vdc 1.0 Vdc 1.0 Vdc 1.0 Vdc 1 3 OUTPUT SPECIFICATIONS Operating Voltage Range 0-60 Vdc 0-60 Vdc 0-100 Vdc 0-200 Vdc Load Current Range 0-5 Adc 0-10 Adc 0-6 Adc 0-3 Adc Max. Surge Current, (10 msec) 60 Apk 100 Apk 100 Apk 30 Apk Max.Off-State Leakage 4 100 µAdc 100 µAdc 100 µAdc 100 µAdc @ Rated Voltage Max. On-State Resistance .040 Ohm .10 Ohm .018 Ohm .20 Ohm @ Rated Current (R ) DS-ON Max. On-State Voltage Drop 0.5V 0.18V 0.24V 0.6V @ Rated Current Max.Turn-On Time @ 10Vdc Control 1.0 msec 1.0 msec 1.0 msec 1.0 msec Max. Turn-Off TIme @ 10Vdc Control 300 µsec 300 µsec 300 µsec 300 µsec © 2007 CRYDOM Inc., Specifications subject to change without notice. GENERAL NOTES All parameters at 25ºC unless otherwise specified. 1 Dielectric and insulation resistance are 2 measured between input and output. Inductive loads should be diode suppressed. 3 4 At 55 Vdc. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com SERIES MS11-CMX. UK: +44 (0)1202 606030 FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre, Rev. 110707 Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com. PAGE 1 OF 3 GERMANY: +49 (0)180 3000 506 Obsolete Series MS11-CMX 3 -10 Amp 0-200 Vdc DC Output GENERAL SPECIFICATIONS 2 Dielectric Strength 2500 Vrms 9 2 Insulation Resistance (Min.) @ 500 Vdc 10 Ohm Max. Capacitance (Input/Output) 15 pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -30 to 125°C MECHANICAL SPECIFICATIONS Weight: (typical) 30 g Encapsulation(SSR): Thermally Conductive Epoxy CURRENT DERATING CURVES 7.0 6.0 CMX100D6 5.0 CRYDOM CMX60D5 4.0 Solid State Relay -A2 +A1 3.0 CMX Series CMX200D3 2.0 Input Output 1.0 0 20 40 60 80 AMBIENT TEMPERATURE [ °C ] 12.0 DIN Rail TS35 10.0 8.0 85.0 12.5 CMX60D10 6.0 4.0 All dimensions are in millimeters (not to scale) 2.0 Colour of carrier including terminations - orange 0 20 40 60 80 AMBIENT TEMPERATURE [ °C ] Max. Load Current vs. Temp. © 2007 CRYDOM Inc., Specifications subject to change without notice. APPROVALS (SSR ONLY) UL E116950 (3A, 6A & 10A Models) For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com SERIES MS11-CMX. UK: +44 (0)1202 606030 FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre, Rev. 110707 Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com. PAGE 2 OF 3 GERMANY: +49 (0)180 3000 506 Obsolete LOAD CURRENT [AMPS] LOAD CURRENT [AMPS] 54.0 29.0 Series MS11-CX 5 Amp 240 Vac AC Output Crydom's family of SPST-NO relays  DIN Rail Mount (TS-35) achieves the highest power switching capability in a DIN mounted air-cooled  SCR Output Rating package. Advanced features include exceptional steady state current, plus  Ultra High Surge ultra-high surge ratings. Models are available to switch up to 280 Vrms with  Crydom’s Patented Design AC or DC control, and either zero-cross  Input Status LED or random turn-on ("R") switching ver- sions. MS11-CX2405A AC CONTROL (120Vac) (24Vac) MS11-CXE240A5 MODEL NUMBERS DC CONTROL (5Vdc) MS11-CX240D5 (24Vdc) MS11-CXE240D5 1 OUTPUT SPECIFICATIONS Operating Voltage (47-63 Hz) [Vrms] 12-280 Load Current Range [Arms] .06-5 Transient Overvoltage [Vpk] 600 250 Max. Surge Current, (16.6ms) [Apk] Max. On-State Voltage Drop @ Rated Current [Vpk] 1.4 2 2 260 Maximum I t for Fusing, (8.3 msec.) [A sec] 0.1 Max. Off-State Leakage Current @ Rated Voltage [mArms] 2 Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] 500 3 Max. Turn-On Time 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec (AC Control) Power Factor (Min.) with Max. Load 0.5 4 1 INPUT SPECIFICATIONS AC CONTROL DC CONTROL 24Vac Nominal Voltage 24Vdc 120Vac 5Vdc MODEL NUMBERS MS11-CX240D5 MS11-CXE240D5 MS11-CX240A5 MS11-CXE240A5 4-5 Vdc Control Voltage Range 15-32 Vdc 90-140 Vrms 18-36 Vrms Max. Turn-On Voltage 3.0 Vdc 15.0 Vdc 90.0 Vrms 18.0 Vrms Min. Turn-Off Voltage 1.0 Vdc 1.0 Vdc 10.0 Vrms 2.0 Vrms Nominal Input Impedance 300 Ohm 1.0k Ohm 14.1k Ohm 4.2k Ohm Typical Input Current @ Nominal Voltage 12 mA 8 mA 10 mArms 5 mArms © 2005 CRYDOM CORP, Specifications subject to change without notice. GENERAL NOTES All parameters at 25ºC unless otherwise specified. 1 Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 2 Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models). 3 No input status LED on AC control modules. 4 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700  FAX (619) 710-8540 SERIES MS11-CX. Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Rev. 012505 Email: sales@crydom.com  WEB SITE: http://www.crydom.com PAGE 1 OF 2 UK: +44 (0)1202 365070  FAX: +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Obsolete Series MS11-CX 5Amp  240 Vac  AC Output GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output/Base 2500 Vrms 9 Insulation Resistance (Min.) @ 500 Vdc 10 Ohm Max. Capacitance Input/Output 10 pF Ambient Operating Temperature Range -30 to 80ºC Ambient Storage Temperature Range -30 to 80ºC MECHANICAL SPECIFICATION Weight: (typical) 30 grms Encapsulation (SSR): Thermally Conductive Epoxy CURRENT DERATING CURVE 6.0 CRYDOM Solid State Relay -A2 +A1 5.0 CX Series 4.0 Input Output 3.0 2.0 1.0 0 DIN Rail TS35 20 40 60 80 AMBIENT TEMPERATURE [ C] 85.0 12.5 Max. Load Current vs. Temp. All dimensions are in millimeters (not to scale) Colour of carrier and termination housing - orange Input status LED is on DC control module only © 2005 CRYDOM CORP, Specifications subject to change without notice. AVAILABLE OPTIONS R Random Turn-On Switching Example: MS11-CX240D5R, MS11-CX240A5R APPROVALS ( SSR ONLY ) UL E 116949 CSA LR 81689 VDE 70938 UG (240V, DC Control Only) For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700  FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com  WEB SITE: http://www.crydom.com SERIES MS11-CX UK: +44 (0)1202 365070  FAX: +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Rev. 012405 Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. PAGE 2 OF 2 GERMANY: +49 (0)180 3000 506 Obsolete LOAD CURRENT [AMPS] 54.0 29.0 DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / PERIGO HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI RISCO DE ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA DESCARGA SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O ELÉTTRICA OU EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSI EXPLOSÃO OR ARC FLASH. EXPLOSION. ONE. • Eteindre • Desconectar • Desconectar • Stellen Sie • Disconnect all toutes les • Spenga tutta o equipamento todos los jeglichen power before sources l'alimentazion de toda á suministros de installing or Strom ab, der d'énergie de e che fornisce energia antes energia a este working with dieses Gerät cet appareil questa de instalar ou equipo antes this equipment. versorgt, bevor apparecchiatu trabalhar com de trabajar avant de Sie an dem ra prima del este equipamen con este equipo. travailler • Verify all Gerät Arbeiten lavorare a questa to dessus de cet connections • Verificar todas durchführen appareil apparecchiatu ra and replace all las conexiones • Verificar todas • Vor dem covers before • Verificare tutti as conexões e y colocar todas • Vérifier tous Drehen auf turning on i collegamenti recolocar todas las tapas antes connections, et Energie alle power. e sostituire as tampas de energizer remettre tous Anschlüsse antes de religar tutte le coperture el equipo. couverts en überprüfen Failure to follow prima della o equipamento olace avant de und alle these El rotazione mettre sous Abdeckungen instructions will incumplimiento sull'alimentazi one O não cumprimento ersetzen. De non-suivi de result in death de estas destas instruções ces instructions L'omissione di or serious injury. Unterlassung instrucciones pode levar á morte provoquera la seguire queste dieser puede provocar ou lesões sérias. mort ou des istruz ioni Anweisungen la muerte o provocherà la lésions sérieuses können zum lesiones serias. morte o di sérieuses. Tode oder zu lesioni serie schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / AVISO RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND RISK OF MATERIAL DAMAGE AND HOT SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG ENCLOSURE • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie • The product's side panels may be hot, allow chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. time for product to cool before touching. toucher. • Beachten Sie die Montageanweisungen, • Follow proper mounting instructions including • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder torque values. notamment les couples de serrage. Fremdkörper in das Produkt ein. • Do not allow liquids or foreign objects to enter • Ne pas laisser pénétrer de liquide ni de corps this product. étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow this instruction can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE RISCHIO DI DANNI MATERIALI E D'INVOLUCRO RISCO DE DANO MATERIAL E DE AQUECIMENTO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • Os painéis laterais do produto podem estar • Los paneles laterales del producto pueden quentes; dê tempo ao produto para arrefecer • I pannelli laterali dell'apparecchio possono estar calientes. Esperar que el producto se antes de lhe tocar. scottare; lasciar quindi raffreddare il prodotto enfríe antes de tocarlo. prima di toccarlo. • Siga devidamente as instruções de montagem. • Respetar las instrucciones de montaje, y en • Não permita a entrada de líquidos e de objectos • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo estranhos no produto. • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può A não observância destas precauções pode Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o provocar a morte, ferimentos graves ou producirse graves lesiones, daños materiales. danni alle apparecchiature. danos materiais. SERIES MS11-CMX. Rev. 110707 PAGE 3 OF 3 Obsolete ANNEX – ENVIRONMENTAL INFORMATION: The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.  Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor X O O O O O die Solder X O O O O O  䰘ӊ - ⦃ֱֵᙃ: ℸ䰘ӊ᠔ᷛ⼎ⱘࣙᣀ⬉ᄤֵᙃѻક∵ᶧ೒ᷛⱘ⦃ֱֵᙃ ヺড়ЁढҎ⇥݅੠೑⬉ᄤ㸠Ϯᷛޚ SJ/T11364 - 2006,  ⬉ᄤֵᙃѻક∵ᶧ᥻ࠊᷛ䆚㽕∖  䚼ӊ ᳝↦᳝ᆇ⠽䋼៪ܗ㋴ ৡ⿄ 䪙 ∲ 䬝 ݁Ӌ䫀 ໮⒈㘨㣃 ໮⒈Ѡ㣃䝮 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) ञᇐԧ㢃⠛ X O O O O O ⛞᥹⚍ X O O O O O    © 2007 CRYDOM Inc., Specifications subject to change without notice. Obsolete