Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Description Single pole thermal circuit breaker with press-to-reset, tease-free, trip- free, snap action mechanism. Type 2-5000 is available with optional manual release (-H), type 2-5700 can be supplied as a push-push switch/circuit breaker (R-type TO CBE to EN 60934 in press-to-reset configuration; M-type when fitted with manual release -H; S-type with push-push operation). Fitted with flange or threadneck for panel mounting. Options include an additional unprotected circuit tap (-A3). Approved to CBE standard EN 60934 (IEC 60934). 1 Typical applications Motors, transformers, solenoids, battery chargers, power supplies, 2-5000-... 2-5700-... appliances, machinery, extra low voltage systems. Ordering information Technical data Type No. For further details please see chapter: Technical Information 2-5000 flange mounting Voltage rating AC 250 V; DC 28 V 2-5700 threadneck panel mounting (UL: AC 250 V; DC 50 V) (hardware bulk shipped) Threadneck design – type 2-5700 only Current rating range 0.05...25 A iG1 moulded threadneck 3/8"-27UNS-2A Typical life AC 250 V / DC 28 V: iG2 moulded threadneck M12x1 0.05...16 A 5,000 operations at 2 x I , inductive N Terminal design 17...25 A 5,000 operations at 2 x I , resistive N P10 blade terminals 6.3-0.8 mm (QC .250) Ambient temperature -20...+60 °C (-4...+140 °F) K10 screw terminals M4x6 Insulation co-ordination rated impulse pollution Shunt terminal (optional) -P10 only (IEC 60664 and 60664 A) withstand voltage degree A3 shunt terminal (up to I 2.5 A/6 A max. load) N 2.5 kV 2 Manual release (optional) reinforced insulation in operating area H manual release facility (type 2-5000 only) DD push to release/push to reset (type 2-5700 only) Dielectric strength Current ratings (IEC 60664 and 60664A) test voltage 0.05...25 A operating area AC 3,000 V Insulation resistance > 100 MΩ (DC 500 V) 2-5700 -iG1 - P10 - .. - DD - 8 A ordering example Interrupting capacity I 0.05...2.5 A 8 x I cn N 3...5 A 20 x I The exact part number required can be built up from the table of choices shown N 6...12 A 200 A above. Ordering references for optional features should be omitted if not required. (higher interrupting capacity available to special order) 13...25 A 400 A Interrupting capacity I U N N (UL 1077) 0.05...20 A AC 250 V 2,000 A 0.05...25 A DC 50 V 2,000 A (higher values upon request) Standard current ratings and typical internal resistance values Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Current Internal Current Internal Vibration 8 g (57-500 Hz) ±0.61 mm (10-57 Hz), rating (A) resistance (Ω) rating (A) resistance (Ω) to IEC 60068-2-6, test Fc, 0.05 280 3 0.1 10 frequency cycles/axis 0.08 100 3.5 0.06 Shock 25 g (11 ms) to IEC 60068-2-27, test Ea 0.1 110 4 0.06 Corrosion 96 hours at 5 % salt mist, 0.2 29 4.5 0.05 to IEC 60068-2-11, test Ka 0.3 14 5 0.05 Humidity 240 hours at 95 % RH 0.4 7 6 0.02 to IEC 60068-2-3, test Ca 0.5 4.9 7 0.02 Mass approx. 29 g 0.6 3.4 8 0.02 0.7 2.5 10 < 0.02 0.8 1.8 12 < 0.02 Approvals 1 1.2 13 < 0.02 1.2 0.8 15 < 0.02 Authority Voltage ratings Current ratings 1.5 0.6 16 < 0.02 VDE (EN 60934) AC 250 V; DC 28 V 0.05...25 A 1.8 0.4 20 < 0.02 CSA/ UL AC 250 V; DC 50 V 0.05...20 A 2 0.3 22 < 0.02 CCC AC 250 V 0.05...25 A SEV AC 250 V; DC 28 V 0,05...25 A 2.5 0.2 25 < 0.02 06/07(070706) www.e-t-a.com 1 - 99 Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Dimensions Terminal design 2-5000-P10 -P10-A3 -K10 0.05...2.5 A ø9.5 ø13.5 .374 .531 14 32 14 32 1 13 .512 flat head screw M4x6 ISO1580 tightening torque 1.2 Nm A 14 32 Installation drawings 19.8 14.5 .780 .571 2-5000-P10 31 blade terminal DIN 46244-A6.3-0.8 1.22 (QC .250) current rating in A operating area 2-5000-P10-A3 0.05...2.5 A 5 14 32 40 1.57 13 50 .512 1.97 A 14 32 2-5700-P10 mounting area 3 iG1= / -27UNS-2A tightening torque max. 1 Nm 8 iG2=M12x1 tightening torque max. 1.5 Nm ø6.5 .256 2-5700-P10 operating area A A 14 32 blade terminal 14 32 DIN 46244-A6.3-0.8 19.8 14.5 (QC .250) .780 .571 mounting area 29 1 1 1.14 .039 .039 D-shaped threadneck current rating in A for standard (-DD version without push button marking) mounting hole 5 SW 14 .551 iG1=ø9.6 -0.1 iG2=ø12.2 -0.1 iG1=.378 -.004 iG2=.480 -.004 mm This is a metric design and millimeter dimensions take precedence ( ) inch 1 - 100 www.e-t-a.com 06/07(070706) iG1=8.8 OFF 22.5 iG2=11.3 5 iG1=.346 .886 .197 iG2=.445 ON 16.5 .650 10.4 46.5 10 1.83 .394 .409 ø4.5 10.4 12.2 ON .480 .177 .409 18.5 44 18.2 OFF .728 1.73 .717 7 .276 iG1=8.9 -0.1 iG2=11.5 -0.1 iG1=.350 -.004 iG2=. 453 -.004 25 .984 10.4 .409 25 .984 max. 2.5 max. 2.5 max .098 max .098 Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Internal connection diagrams 0.05 ... 2.5 A 3 ... 25 A (with or without shunt terminal) (without shunt terminal) 1 1 (3) 1 (-A3) 2 2 Typical time/current characteristics at +23°C/+73.4°F 10000 0.05 - 2.7 A 2.8 - 23 A 25 A 1000 100 10 1 0.1 12 46810 20 40 ... times rated current The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 – Technical information. Ambient temperature °F -4 +14 +32 +73.4 +104 +122 +140 °C -20 -10 0 +23 +40 +50 +60 Derating factor 0.76 0.84 0.92 1 1.08 1.16 1.24 mm This is a metric design and millimeter dimensions take precedence ( ) inch 06/07(070706) www.e-t-a.com 1 - 101 Trip time in seconds Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Accessories for types 2-5000 and 2-5700 with screw terminals -K10 176 Bus bar 6.93 Y 303 563 01 162 X 6.38 7 18 60° .276 .709 1 X Accessories for type 2-5000-... Accessories for type 2-5700-... With 3/8" threadneck (-iG1) Water splash cover, transparent Fixing plate for push button (IP64) Y 301 056 02 Water splash cover, transparent Y 300 538 01 and Y 300 728 01 knurled nut Y 300 628 01 X 200 799 01 (IP64) 50 31.5 14.5 1.97 1.24 .571 40 4.5 18 1.57 .177 .709 3 / -27 UNS-2B 8 Water splash cover, Hex nut with splash transparent with cover black without O ring 40 special knurled nut X 210 739 01 (IP64) 1.57 X 200 798 02 (IP64) transparent splash cover 50 X 201 296 03 (IP64) 1.97 Rear terminal shroud, transparent (IP64) Y 300 476 01 12.5 29 .492 1.14 3 3 / -27 UNS-2B / -27 UNS-2B 8 8 E - T - A Separate hardware Hex nut Knurled nut Y 300 192 01 Y 307 117 02 3/8-27 UNS-2B 3/8-27 UNS-2B ø12 ø6 .472 .236 SW14 ø15 2.5 3 .591 .551 .098 .118 With M12 threadneck (-iG2) Water splash cover, Hex nut with splash cover, black transparent with knurled nut X 201 296 01 without O ring (IP64) and O ring X 200 801 03 with O ring (IP66) X 210 663 01 (IP64) Hex nut with splash cover, transparent X 200 801 08 with O ring (IP66) M12x1 M12x1 Hex nut Knurled nut Y 300 116 02 Y 302 065 01 M12x1 M12x1 3.2 .126 mm This is a metric design and millimeter dimensions take precedence ( ) inch All dimensions without tolerances are for reference only. In the interest of improved design, 2.5 ø17 0.5 x 45° SW14 performance and cost effectiveness the right to make changes in these specifications .098 .020 x 45° without notice is reserved.Product markings may not be exactly as the ordering codes. .551 .669 Errors and omissions excepted. 1 - 102 www.e-t-a.com 06/07(070706) 1.5 .059 49 1.93 10 .394 .756 M4 18.5 2.3 .091 .728 0.5 .020 2 .079 1.1 .043 19.2