High Performance Thermal Circuit Breaker 413-... Description Single pole high performance thermal circuit breaker with tease-free, trip-free, snap action mechanism and push/pull on/off manual actuation (M-type TO CBE to EN 60934). An indicator band on the push button clearly shows the tripped/off position. Threadneck panel mounted and available in tracked vehicle, aircraft and general purpose versions. Typical applications Extra low voltage wiring systems on all types of vehicles for land, sea and air; defence equipment; battery powered machines. 1 413-... Ordering information Type No. 413 threadneck panel mounting Technical data Terminal design K14 screw terminals M6 (to aircraft specs.) Voltage rating DC 28 V K54 reinforced screw terminals M6, housing sealed AC 115 V (400 Hz) upon request Version Current rating range 30...55 A (-FN2) FN2 vehicle application, nickel-plated 30...90 A (-LN2/-N2), LN2 aircraft application, black finish N2 general application, nickel-plated Typical life 2,000 operations at 1 x I N Current ratings Ambient temperature -55...+75 °C (-67...+167 °F) 30...55 A (-FN2) Insulation co-ordination rated impulse pollution 30...90 A (-LN2/N2) (IEC 60664 and 60664A) withstand voltage degree 1.5 kV 3 413 - K14 - LN2 - 40 A ordering example Dielectric strength (IEC 60664 and 60664A) test voltage operating area AC 1,500 V Preferred types Insulation resistance > 100 MΩ (DC 500 V) Interrupting capacity I 6,000 A cn Preferred types Standard current ratings (A) Interrupting capacity (UL 1077) 6,000 A 30 35 40 45 50 60 70 80 90 Degree of protection operating area IP40 x x x x x 413-K54-FN2- (IEC 60529/DIN 40050) terminal area IP00 x x x x x x x x x 413-K14-LN2- Vibration 10 g (56-500 Hz), ± 0.76 mm (10-55 Hz) to VG 95210, sheet 19, MIL-STD-202, meth. 204, Standard current ratings and typical voltage drop values IEC 60068-2-6, test Fc Shock 50 g (11 ms) to VG 95210, sheet 28, Current Voltage Current Voltage MIL-STD-202, meth. 213, rating (A) drop (mV) rating (A) drop (mV) IEC 60068-2-27, test Ea -LN/N -FN -LN/N -FN Corrosion 96 hours at 5 % salt mist, to VG 95210, sheet 2, 30 ≤ 250 ≤ 250 55 - ≤ 200 MIL-STD-202, meth. 101, 35 ≤ 250 ≤ 250 60 ≤ 200 - IEC 60068-2-11, test Ka Humidity 240 hours at 95 % RH 40 ≤ 200 ≤ 200 70 ≤ 200 - to VG 95210, sheet 7, 45 ≤ 200 ≤ 200 80 ≤ 200 - MIL-STD-202, meth. 106, IEC 60068-2-3, test Ca 50 ≤ 200 ≤ 200 90 ≤ 200 - Mass approx. 65 g 1646 www.e-t-a.de 1 50 35° 35° High Performance Thermal Circuit Breaker 413-... Dimensions Internal connection diagram 413-K14-... tightening torque max. 4 Nm line 1 ø10.6 M12x1 .417 black white lock washer 2 1 Typical time/current characteristics 23 413-...-FN2 30...55 A .906 10000 +75 °C screw ISO1580-M6x8 (-N/-FN) +167 °F M6x10 (-LN) lock washer DIN 137-B6 +23 °C tightening torque max. 2.5 Nm 1000 +73.4 °F -55 °C mounting holes -67 °F 413-K14-LN2 100 min. ø3.2 current rating in A 9.5 min .126 .374 10 1 SW14 .551 location pin 32 0.1 1.26 thickness 1.5 - 3 mm .059 - .118 in. 0.01 413-K54-... tightening torque max. 4 Nm M12x1 ø10.6 0.001 black .417 12 46 810 20 40 6080100 white … times rated current lock washer 413-...-LN2/-N2 30...90 A 10000 +75 °C +167 °F +23 °C 1000 +73.4 °F -55 °C -67 °F 100 10 23 .906 1 screw ISO1580-M6x8 (-N/-FN) M6x10 (-LN) lock washer DIN 137-B6 0.1 tightening torque max. 2.5 Nm 413-K54-FN2/-N2 0.01 mounting holes current rating in A 9.5 0.001 .374 12 46 810 20 40 6080100 … times rated current SW14 .551 32 min. ø3.2 1.26 min .126 location pin thickness 1.5 - 3 mm .059 - .118 in. mm This is a metric design and millimeter dimensions take precedence ( ) inch 2 www.e-t-a.de 1646 35° 35° max. 3.5 max.138 max. 3.5 max.138 12.2 OFF 12.2 OFF .480 .480 7 ON 7 ON .276 .276 max. 63 max. 63 2.7 2.7 max. 2.48 max. 2.48 1.5 1.5 .106 .106 .059 .059 50 49 49 max.19 1.93 1.93 max.19 max .748 55 6.5 55 6.5 max .748 2.17 .256 2.17 .256 max. 64 max. 64 +0.2 max. 2.52 max. 2.52 ø12.5 +0.2 ø12.5 min.3 min.3 +.008 .492 +.008 .492 min .118 min .118 ±0.2 ±0.2 9.5 9.5 ±.008 .374 ±.008 .374 Trip time in seconds Trip time in seconds High Performance Thermal Circuit Breaker 413-... High Performance Thermal Circuit Breaker 413-... Accessories (approved to VG 95345, part 23) Accessories Splash cover /hex nut assembly with O ring (IP66 and IP67) Identification collar to be snapped on the push button X 200 801 08 nickel plated nut M12x1, transparent cover Y 307 004 01 black X 200 801 03 matt black finish nut M12x1, black cover Y 307 004 02 white X 200 801 12 with blackened nut and transparent cover Y 307 004 03 red Y 307 004 04 green Y 307 004 05 blue ø14 .551 ø6.85 .270 M12x1 1 ø12.35 .486 Splash cover black /hex nut assembly with O ring (IP54) X 200 802 01 nickel plated nut M12x1 X 200 802 02 matt black finish nut M12x1 0.65 .026 M12x1 Lock out ring to block the push button in OFF position Y 307 005 01 red Y 307 005 02 black ø14.6 Actuator extension (black) .575 to be fitted on the push button X 200 803 01 ø20 ø.787 ø10.9 .429 0.8 .031 Approvals Authority Standard Rated voltage Current ratings UL UL1077 DC 28 V 30 A…90 A CSA C22.2 No DC 28 V 30 A…90 A 235 QPL Sweden TL 5925-001 DC 28 V 30 A…50 A Defence Material Admin. mm This is a metric design and millimeter dimensions take precedence ( ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 1646 www.e-t-a.de 3 17 .669 6.4 7.7 .252 .303 1 4 www.e-t-a.de 1646