® Bussmann OPTIMA™ OPM-SW Overcurrent Protection Module with Load Break Disconnect Switch Physical Characteristics: ® • Holds Buss LP-CC, Class CC fuses. • Small size matches 45mm IEC starter width. • Fits #14 - #10 gauge wire, both stranded and solid. • 3 pole version. • Phil slot screws. • Pressure plate terminations. • Handle and shaft are required for proper operation (see page 2). Current-Limitation: • Class CC levels. • Provides Type 2 protection for motor starters (when used ® with properly sized LOW-PEAK Class CC fuses from Bussmann). Safety Features: Catalog Symbol: OPM-SW • Load break. Interlock prevents fuse removal unless switch Ampere Rating: 30A Maximum is in the off position. AC Voltage Rating: 600 Volts (or less) • Rejection of non-Class CC fuses. Horsepower Rating of Switch: • Blown fuse indicators. V 208 240 480 600 3PH HP 5 7.5 15 20 • Safety handle. Short-Circuit Rating: Suitable for use on a circuit • Finger safe terminals. capable of delivering not more than 100,000A RMS Sym. • Pull-out module for convenient fuse loading and removal. 600V max. when protected by 60A Class J or 30A Class CC • 35mm DIN-rail or screw mount. fuses on the line side of the device. • Dead-front construction. No exposed contacts for added Agency Approvals: safety. UL Recognized, UL508, Guide NLRV2, File E161278 • Padlockable. CSA Certified, C22.2 No. 39, Class 6225-01, File 47235 CE logo denotes compliance with European Union Low Voltage Directive (50- Shipping Weight: Approx. 485 grams/1.0 lbs. 1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Carton Quantity: 1 Bussmann Application Engineering at 314-527-1270 for more information. Applies to OPM-1038SW and OPM-1038RSW. All other dimensions (±0.005) Inches 1.99" Millimeters (±0.130) 50.4mm PANEL MOUNT ON HOLE LOCATION 1.78" 45.2mm OFF C/L 6.31" (–0.01) C/L 160.2mm ( 0.25) 4.49" 6.82" (–0.01) 4.80" 173.1mm (–0.25) 114.0mm 121.9mm To Terminals To 2.25" Terminals 57.2mm 1.10" 27.9mm 0.9" C/L 4.80" C/L 22.9mm 1.76" 121.9mm 44.6mm Form No. OPM-SW Page 1 of 2 5-21-03 SB03129 Data Sheet: 1101 OBSOLETE – RECOMMENDED SUBSTITUTE OPM-1038RSW Series (Data Sheet: 1103) Note: Switch on OPM-1038RSW Series is on load side of fuse holder. ® Bussmann OPTIMA™ OPM-SW Overcurrent Protection Module with Load Break Disconnect Switch Ordering Information: OPM-SW + Handle + Shaft = Complete Disconnect Switch (without fuses) 1. Select the appropriate handle style (Selector, Pistol, or Rotary). 2. Select the shaft corresponding to the handle type and mounting depth required (no shaft needed for the OPH125). Handles ( 20• ¯ .20• Shaft Dimension) N. Length Catalog Style NEMA Type Color Marking Padlockable Defeatable (Inches) Number Selector 1, 3R, 12 Black — Off/On Yes No BDSL105 Selector 1, 3R, 12 Red/Yel — O/I Yes No BDSL106 Selector 1, 3R, 12 Red/Yel — Off/On Yes No BDSL107 Pistol 1, 12 Black 3.15 Off/On Yes Yes BDH47 Pistol 1, 3R, 12 Black 2.36 Off/On Yes Yes BDH99 Pistol 1, 3R, 12 Red/Yel 2.36 O/I Yes Yes BDH100 Pistol 1, 3R, 4, 4X, 12 Black 2.36 Off/On Yes No BDH102 Pistol 1, 3R, 4, 4X, 12 Red/Yel 2.36 O/I Yes No BDH103 Rotary 1 Black 1.67 O/I Yes No OPH125 Off/On NOTE: OPH125 is a rotary handle that mounts directly to switch. Spare Fuseholder: Part No. 5TPH Extended Shafts ( .20• ¯ .20• Shaft Dimension) N 2.98" For Handle Mounting Shaft Catalog 75.57mm Type Depth Length Number * 3.74 - 4.33 2.76 BDS70 4.52 - 5.71 3.54 BDS90 1.03" NEMA 1, 3R 5.31 - 6.50 4.33 BDS110 26.16mm & 12 6.88 - 8.06 5.91 BDS150S Selector 8.07 - 9.25 7.09 BDS180 11.02 - 14.16 12.01 BDS305 SPARE FUSE DOUBLE SIDED 6.89 - 7.48 5.91 BDS150P HOLDER BODY ADHESIVE TAPE NEMA 1, 3R 7.67 - 8.27 6.69 BDS170 4, 4X & 12 11.42 - 12.00 10.43 BDS265 Pistol .63" 16.72 - 17.32 15.75 BDS400 15.88mm *Mounting depth is the distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length. Available only in bulk quantities. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. OPM-SW Page 2 of 2 BIF Doc #1101 5-21-03 SB03129