Manufacturers
EBM-PAPST INC. A2E250-AE65-02
Description
AC Fan Axial Bearing 230V 947.61CFM/1024.13CFM 72dB/73dB
A2E250-AE65-02
Part Number
A2E250-AE65-02
Price
Request Quote
Manufacturer
EBM-PAPST INC.
Lead Time
Request Quote
Category
Thermal Management » Blowers and Fans
Specifications
Manufacturer
ebm-papst Inc.
Manufacturers Part #
A2E250-AE65-02
Industry Aliases
A2E 250-AE65 -02
Sub-Category
Thermal Management Blowers and Fans
Factory Pack Quantity
1
Datasheet
Extracted Text
A2E250-AL06-01 AC axial fan sickled blades (S series) ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 · D-74673 Mulfingen Phone +49 7938 81-0 Fax +49 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership · Headquarters Mulfingen County court Stuttgart · HRA 590344 General partner Elektrobau Mulfingen GmbH · Headquarters Mulfingen County court Stuttgart · HRB 590142 Nominal data Type A2E250-AL06-01 Motor M2E068-CF Phase 1~ 1~ Nominal voltage VAC 230 230 Frequency Hz 50 60 Type of data definition fa fa Valid for approval / standard CE CE -1 Speed min 2450 2600 Power input W 115 150 Current draw A 0.51 0.66 Motor capacitor µF 3 3 Capacitor voltage VDB 400 400 Capacitor standard P0 (CE) P0 (CE) Max. back pressure Pa 120 85 Min. ambient temperature °C -25 -25 Max. ambient temperature °C 65 50 Starting current A 0.88 0.87 ml = Max. load · me = Max. efficiency · fa = Running at free air · cs = Customer specs · cu = Customer unit Subject to alterations Item no. 10231-5-9980 · Revision 82702 · Release 2014-05-08 · Page 1 / 6 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com A2E250-AL06-01 AC axial fan sickled blades (S series) Technical features Mass 2 kg Size 250 mm Surface of rotor Coated in black Material of blades Sheet steel, coated in black Number of blades 7 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 44 Insulation class "B" Humidity class F1-2 Max. permissible ambient motor + 80 °C temp. (transp./ storage) Min. permissible ambient motor - 40 °C temp. (transp./storage) Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Operation mode S1 Motor bearing Ball bearing Touch current acc. IEC 60990 < 0.75 mA (measuring network Fig. 4, TN system) Motor protection Thermal overload protector (TOP) wired internally Cable exit Variable Protection class I (if protective earth is connected by customer) Product conforming to standard EN 60335-1; CE Approval CCC; EAC Item no. 10231-5-9980 · Revision 82702 · Release 2014-05-08 · Page 2 / 6 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com A2E250-AL06-01 AC axial fan sickled blades (S series) Product drawing 1 Connection line PVC, 4x crimped core-end sleeves 2 Direction of air flow "V" 3 Depth of screw max. 5 mm 4 Direction of rotation counterclockwise, seen on rotor Item no. 10231-5-9980 · Revision 82702 · Release 2014-05-08 · Page 3 / 6 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com A2E250-AL06-01 AC axial fan sickled blades (S series) Connection screen U1 blue Z brown U2 black PE green/yellow Item no. 10231-5-9980 · Revision 82702 · Release 2014-05-08 · Page 4 / 6 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com pf s[Pa] A2E250-AL06-01 AC axial fan sickled blades (S series) Charts: Air flow 50 Hz Druck p f s[Pa]für Rho=1,2kg/m^3 qv[cfm] 0 200 400 600 800 1.000 1.200 210 200 0,8 190 0,75 180 Air performance measured as per ISO 5801 0,7 Installation category A. For detailed 170 information on the measuring set-up, please 0,65 contact ebm-papst. Suction-side noise 160 levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. 150 0,6 The values given are valid under the measuring conditions mentioned above and 140 may vary according to the actual installation 0,55 situation. With any deviation from the 130 standard set-up, the specific values have to 0,5 be checked and reviewed with the unit 120 installed. 4 0,45 110 100 0,4 90 0,35 3 80 0,3 70 0,25 60 50 0,2 2 40 0,15 30 0,1 20 0,05 10 1 0 0 0 200 400 600 800 1.000 1.200 1.400 1.600 1.800 2.000 qv[m^3/h] Measured values U f n P I qv p e fs -1 3 V Hz min W A m /h Pa 1 230 50 2450 115 0.51 1820 0 2 230 50 2420 120 0.52 1635 40 3 230 50 2335 125 0.56 1375 80 4 230 50 2270 134 0.58 1000 115 U = Supply voltage · f = Frequency · n = Speed · P = Power input · I = Current draw · qv = Air flow · p = Pressure increase e fs Item no. 10231-5-9980 · Revision 82702 · Release 2014-05-08 · Page 5 / 6 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com p f s[Pa] pfs_E[IN H2O] p f s[Pa] A2E250-AL06-01 AC axial fan sickled blades (S series) Charts: Air flow 60 Hz Druck p f s[Pa]für Rho=1,2kg/m^3 qv[cfm] 0 200 400 600 800 1.000 1.200 170 0,68 165 0,66 160 0,64 155 0,62 150 0,6 145 0,58 Air performance measured as per ISO 5801 140 0,56 Installation category A. For detailed 135 information on the measuring set-up, please 0,54 contact ebm-papst. Suction-side noise 130 0,52 levels: LwA measured as per ISO 13347 / 125 0,5 LpA measured with 1m distance to fan axis. 120 0,48 The values given are valid under the measuring conditions mentioned above and 115 0,46 may vary according to the actual installation 110 0,44 situation. With any deviation from the 105 0,42 standard set-up, the specific values have to be checked and reviewed with the unit 100 0,4 installed. 95 0,38 90 0,36 4 85 0,34 80 0,32 75 0,3 70 0,28 65 0,26 3 60 0,24 55 0,22 50 0,2 45 0,18 40 0,16 35 0,14 2 30 0,12 25 0,1 20 0,08 15 0,06 10 0,04 5 0,02 1 0 0 0 200 400 600 800 1.000 1.200 1.400 1.600 1.800 2.000 2.200 qv[m^3/h] Measured values U f n P I qv p e fs -1 3 V Hz min W A m /h Pa 1 230 60 2600 150 0.66 1970 0 2 230 60 2525 156 0.68 1735 30 3 230 60 2415 160 0.70 1525 60 4 230 60 2300 164 0.71 1250 85 U = Supply voltage · f = Frequency · n = Speed · P = Power input · I = Current draw · qv = Air flow · p = Pressure increase e fs Item no. 10231-5-9980 · Revision 82702 · Release 2014-05-08 · Page 6 / 6 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com p f s[Pa] pfs_E[IN H2O]
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the A2E250-AE65-02?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
DC Fan Axial Ball Bearing 24V 16V to 36V 552.9CFM 66dB Low Noise/PWM 2214F/2TDHHO
DC Fan Axial Sintec-Sleeve Bearing 12V 10V to 14V 1.9CFM 15dB 25 X 25 X 8mm Low Power Consumption 25...
DC Fan Axial Sintec-Sleeve Bearing 5V 4.5V to 5.5V 2.7CFM 23dB 25 X 25 X 8mm Low Power Consumption 2...
DC Fan Axial Sintec-Sleeve Bearing 5V 4.5V to 5.5V 1.2CFM 5dB 25 X 25 X 8mm Low Power Consumption 25...
DC Fan Axial Sintec-Sleeve Bearing 5V 4.5V to 5.5V 1.9CFM 16dB 25 X 25 X 8mm Low Power Consumption 2...
DC Fan Axial Ball Bearing 12V 6V to 13.8V 140CFM 69dB 92 X 92 X 38mm 3212J/2H3
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods