Diagonal Fan - DV6300 The engineer’s choice Features and Benefits - Series DV6300 Diagonal fans are ideal for applications with strict requirements regarding air performance with high back-pressure and small installation space. The new fans of the DV6300 series from ebm-papst now go a step further. Besides improved blower output, the fans with electronically regulated S-Force motor also offer additional functions such as temperature based speeds, active motor cooling, closed loop PWM speed control, and constant speeds over wide input voltage ranges. Diagonal compact fans for high pressure and low operating noise The fans have a diameter of 172 mm (6.77 in) on the intake side, making them exactly the same size as the DV6200 range. On the exhaust side, the aerodynamically revised design has a diameter of 190 mm (7.48 in) and an installation depth of 51 mm (2 in) for DV6318/2TDH4P and below performance models. DV6318/2TDH5P has 3 a rotor protrusion of 3 mm (0.12 in). The free-blowing air flow is up to 647 CFM (1100 m/h ), the pronounced pressure saddle is up to 3 in. H 0 (750 Pa). At 83.5 dB(A), operating noise in the high-pressure range is about 8 2 dB(A) quieter than older models at the same operating point. That is due to various factors, one of them being a flange with noise-optimized links. With an efficiency of 85% for complete motor and electronics, the 350W motor is configured for a long service life at nominal output in all components. Applications and target markets The DV6300 fan series is particularly well suited for applications with high endurance loads, e.g. for motor frequency inverters and switch cabinets cooling, printing machines and heat exchangers. The fans are also highly suitable for the systems requiring multiple different operating conditions such as cooling air requirements of IT/ telecommunications; for example base stations, servers, etc. or in power inverters for wind turbines. Flow comparison: various ebm-papst products Benefits & properties at a glance - Higher air performance up to 1100 m³/h or 647 CFM 7 - Extremely broad operating range with a high pressure Legend: 6 DV6318 TDH5P saddle curve DV6318 TDH4P - Very high reliability despite the ultra high performance 5 6318 TDH4P levels seen with the DV6300TD 4 - Up to 8 dB(A) lower noise level at the same operating point - Significantly lower rotational speed 3 - Innovative impeller: diagonal impeller with overlapping 2 blades, aerodynamically and acoustically optimized - Active engine cooling via air disc for high output 1 - High-efficiency S-Force motor 0 - Innovative electronics with increased performance in the 0 100 200 300400 500 600 700 Flow Rate [CFM] pressure saddle curve - Sturdy design due to 7 noise-optimized struts and a metal flange - Higher IP protection classes up to IP 54, with reduced air performance, are possible Static PressureD p [in H O] f 2 DV6300_ TDH4P_9295416100_002 D_EN__Vorlage 19.04.2012 10:08 Seite 2 DV6300_ TDH4P_9295416100_002 D_EN__Vorlage 19.04.2012 10:08 Seite 2 3 max. 1100 m /h DC-diagonal fans Series DV6300 TD 172 Ø x 51 mm 3 max. 1100 m /h DC-diagonal fans Technical Data - Series DV6300 Highlights: Series DV6300 TD 172 Ø x 51 mm – 3-phase fan drive with high degree of running smoothness 172 Ø x 51 mm (6.77 x 2 in) - S-Force – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. Highlights: Highlights: – Standard with PWM control input and speed signal. – 3-phase fan drive with high degree of running smoothness – 3-phase fan drive with high degree of running smoothness Additional control inputs, alarm and speed signals available on request. – V– ery rigid compression cur Very rigid compression cur ve for high air flow at high back pressure. ve for high air flow at high back pressure. General characteristics: – Low operating sound level at high back pressure. – Low operating noise level at high back pressure. – Material: aluminium housing,fibreglass-reinforced PBT impeller; – Standard with PWM control input and speed signal. – Standard with PWM control input and speed signal. housing with grounding lug M4 x 8 (Torx). Additional control inputs, alarm and speed signals available on request. Additional control inputs, alarm and speed signals available on request. – Protected against reverse polarity and locking. General characteristics: General characteristics: – Connection via single strands AWG 18,UL3266 / AWG22, UL1061 bared and tin-plated. – Material: aluminum housing,fiberglass-reinforced PBT impeller; – Material: aluminium housing,fibreglass-reinforced PBT impeller; – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. housing with grounding lug M4 x 8 (Torx). housing with grounding lug M4 x 8 (Torx). – – Protected against reverse polarity and locking. Mass: 960 g. – Protected against reverse polarity and locking. – Connection via single strands AWG 18,UL3266 / AWG22, UL1061 bared and tin-plated. – Connection via single strands AWG 18,UL3266 / AWG22, UL1061 bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 33.8 oz; 960 g. – Mass: 960 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours mm DV 6318 /2TDH4P 1050 617 48 36...72 tbd 8.7 300 6 500 -20...+65 62 500 / 35 000 125 000 1 Yes Nominal data Yes DV 6318 /2TDH5P 1100 647 48 36...72 tbd 9.2 390 6 800 -20...+65 60 000 / 32 500 115 000 23 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours mm *Vorläufig Yes DV 6318 /2TDH4P 1050 617 48 36...72 tbd 8.7 300 6 500 -20...+65 62 500 / 35 000 125 000 1 Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. DV 6318 /2TDH5P 1100 647 48 36...72 tbd 9.2 390 6 800 -20...+65 60 000 / 32 500 115 000 23 Yes *Vorläufig Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. 1600 1400 1200 1 1600 1000 1400 800 1200 1 600 1000 400 1600 800 200 1400 2 600 Tu, max 02 100 00300 400 500 600 [CFM] 1200 400 3 200 400 600 800 1000 [m /h] *DV6318/2TDH5P has a 3mm rotor protrusion 1600 1000 200 a 1400 2 Tu, max DV6318/2TDH4P 1.97 (50.8 ± 0.5) 800 02 100 00300 400 500 600 [CFM] DV6318/2TDH5P 2.12 (53.8 ± 0.5) 1200 3 [m /h] 600 200 400 600 800 1000 1000 400 800 200 Tu, max 600 02 100 00300 400 500 600 [CFM] 400 3 200 400 600 800 1000 [m /h] 200 Tu, max 02 100 00300 400 500 600 [CFM] 3 200 400 600 800 1000 [m /h]  2 H N IP54 A P G PWM T I  2 H N IP54 A P G I PWM T a* [Pa] 1 23 45 6 [in H2O] [Pa] 1 23 45 6 [in H O] 2 [Pa] Air flow 1 23 45 6 [in H2O] [Pa] Air flow 1 23 45 6 [in H O] 2 Air flow Air flow Nominal voltage Nominal voltage Voltage range Voltage range Sound pressure level Sound pressure level Sound power level Sound power level Sincec sleeve bearings Ball bearings Sincec sleeve bearings Ball bearings Power input Power input Nominal speed Nominal speed Temperature range Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) Life expectancy L ∆ 10 (40 °C) Curve Curve Rotor protrusion Rotor protrusion UL and VDE Approval UL and VDE Approval Printed in USA - 11/2012 ebm-papst Inc Farmington, CT USA 100 Hyde Road Farmington, CT 06034 Phone + 1 860 674 1515 Fax + 1 860 674 8536 sales@us.ebmpapst.com www.ebmpapst.us