Manufacturers
EOS POWER ACC-GPS65-3
Description
Single, Dual and Triple Output 65W AC/DC Power Supplies
ACC-GPS65-3
Part Number
ACC-GPS65-3
Price
Request Quote
Manufacturer
EOS POWER
Lead Time
Request Quote
Category
Power » Power Accessories
Specifications
Manufacturer
EOS Power
Manufacturers Part #
ACC-GPS65-3
Factory Pack Quantity
1
Datasheet
Extracted Text
GPS65 Series MVLT80 Series Single, dual and triple output 65W AC/DC Power Supplies Medical 80W AC/DC Power Supply • Low cost 65W industry standard pack- age • EN55022-B. FCC Part 15 level B • Safety approvals to IEC950 • Universal input • 3.3V output model • Fixed switching frequency 1.08 [27.4] Model Output Output Output Current MAXIMUM 1 2 3 Number Voltage Max Peak Fan GPS65-1001 V1 3.3V 8.0A 12.0A 11.0A GPS65-1002 V1 5V 8.0A 12.0A 11.0A GPS65-1003 V1 12V 3.3A 6.5A 5.4A GPS65-1004 V1 15V 2.6A 5.0A 4.3A GPS65-1005 V1 24V 1.6A 3.5A 2.7A GPS65-1006 V1 48V 0.8A 1.6A 1.3A GPS65-2000 V1 5V 3.0A 7.5A 6.0A OUTPUT SPECIFICATIONS V2 12V 2.4A 4.5A 3.0A Output Power Convection 40W GPS65-3000 V1 5V 3.0A 7.5A 6.0A 6 CFM Fan 65W V2 12V 2.0A 3.5A 2.5A Total Regulation Min to full load V3 -12V 0.4A 1.0A 0.4A V1 +3% GPS65-3001 V1 5V 3.0A 7.5A 6.0A V2, V3 +20% .82 [20.8] MAXIMUM 5 V2 15V 1.6A 3.0A 2.0A Output Voltage Adjust V1, V2 +5% V3 -15V 0.3A 1.0A 0.35A Transient Response 25% step at 0.1A/µs Voltage deviation 5%, max ACC-GPS65-3 Metal cover kit accessory Recovery time <1ms OVP V1 only 5V 135%, +15% Short Circuit Protection Auto Recovery Short Term INPUT SPECIFICATIONS 4 Ripple and Noise Output <5V 50mV OUTPUT CONNECTOR J2 OUTPUT CONNECTOR J3 INPUT CONNECTOR J1 Input Voltage Universal 90-264VAC pk-pk Outputs >5V 360mV 120-370VDC Single Output Quad Output Output Rise Time <1.0s Pin 1 AC Neutral Pin 1 Common Efficiency 75% Pins 1,2,3,4 V1 V1 Minimum Load Main output 10% Pin 2 AC Line Pin 2 Power Fail/Good Input Frequency 47-63 Hz Pins 5,6,7,8 DC Return DC Return Input Current Full load at low line 1.5Arms, max Pins 9,10 NC V2 INPUT SPADE CONNECTOR Inrush Current High Line, cold start 32A, max EMC AND SAFETY SPECIFICATIONS Pin 11 NC V3 Leakage Current <250µA Pin 12 NC V4 GND AC Ground CE Mark Complies with te LVD EMC EN55022-B, CISPR22-B, FCC Part 15 Class B, ENVIRONMENTAL SPECIFICATIONS EN50082-1 MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS 1,2,3 Operating Temperature Full power 0 to 50°C Agency Approvals UL, c-UL, Nemko Derate to 50% load 51 to 70°C Operating Temperature No derating 0 to 50°C AC Input Connector J1 Molex 3 position, 0.156 center Linear derate to 50% 51 to 70°C Safety Standards IEC950, EN60950, UL1950 header 26-60-4030 or equivalent Storage Temperature –40 to 85°C Storage Temperature –40 to 85°C Ground Connector Spade connector, 0.25” Safety File numbers Nemko: P02101373 Cooling Convection 40W Cooling Convection 80W UL: E136019 DC Output Connector J2 Molex 12 position, 0.156 center Fan 65W header 26-60-4120 or equivalent Relative Humidity Non condensing 95%, max Isolation Voltage Input to output 3000 VAC Relative Humidity Non condensing 5% to 95% Output Connector J3 Molex 2 position, 0.100 center MTBF MIL-HDBK-217F >200,000 hrs header 22-23-2021 or equivalent MTBF Demonstrated >150,000 hrs Size 3x5x1.08” (76.2x126.9x27.2mm) Notes Switching Frequency 50kHz, fixed Weight 12oz (250g) 1. Continuous output power is limited to 40W with convection cooling. 2. Peak loading can be applied for 60 secs with <5% duty-cycle. 3. Continuous output power is limited to 65W with 20 CFM fan cooling. 4. Ripple and noise measured at J2 with 10 µF tantalum and 0.1µF ceramic shunt caps. 5. To maintain stated regulation on multiple output units: 0.25<(I1/I2)<5.0 and I1>0.5A 6. This component level power supply is designed to meet the specified immunity stan- MVLT80 Series GPS65 Series Medical 80W AC/DC Power Supply Single, dual and triple output 65W AC/DC Power Supply TM • 80W universal input medical AC/DC • Low leakage current <250µA • EN55022-B, CISPR22-B FCC Part 15 Level 5.000 B • Small 3x5x1 inch package 4.550 0.225 • Ultra high efficiency >85% • VDE, UL and CSA approvals to IEC601 ÿ0.164 4-PLS 1 Model Output Nom Set Output Min. Number Vout Point Current Load MVLT80-1000 V1 5V 5.1V 12.0A 1.0A MVLT80-1001 V1 12V 12V 6.8A 0.4A MVLT80-1002 V1 15V 15V 5.5A 0.4A J7 MVLT80-1003 V1 24V 24V 3.4A 0.2A PIN 1 MVLT80-1004 V1 48V 48V 1.7A 0.2A J2 MVLT80-4000 V1 5V 5.1V 10.0A 3.0A PIN 5(E) V2 12V 12.25V 3.0A 0.1A PIN 3(N) V3 -5V -5.1V 0.8A 0.0A OUTPUT SPECIFICATIONS PIN 1(L) PIN 6 F1 V4 -12V -12.5V 0.8A 0.0A Output Power Convection cooled 80W max MVLT80-4001 V1 5V 5.1V 10.0A 3.0A Hold-Up Time 115V/230V 10ms/18ms V2 24V 24.0V 2.0A 0.1A Voltage Set Point V1 +3% V3 12V 12.5V 0.8A 0.0A Accuracy V2, V3, V4 +5% V4 -12V -12.5V 0.8A 0.0A Line Regulation Low line to high line 0.3% MVLT80-4002 V1 5V 5.1V 10.0A 3.0A Load Regulation Min to full load V2 15V 15.9V 3.0A 0.1A V1 +1% V2, V3, V4 +5% V3 -5V -5.1V 0.8A 0.0A Preferred direction of Air Flow Transient Response 50% to full load V4 -15V -15.9V 0.8A 0.0A Maximum Component Height Above PCB 1.25". Voltage deviation 10%, max MVLT80-4003 V1 5V 5.1V 10.0A 3.0A Recovery time <1ms Note : All Dimensions are in Inches. V2 12V 12.25V 3.0A 0.1A OVP V1 only 5V 6.2V, +0.4V V3 24V 23.6V 0.8A 0.0A 3.3V 3.9V, +0.25V V4 -12V -12.5V 0.8A 0.0A Overload Protection Primary limited 105W, +15W MVLT80-4004 V1 3.3V 3.3V 10.0A 3.0A Short Circuit Protection Auto Recovery INPUT CONNECTOR J2 OUTPUT CONNECTOR J2 <6s Short Term V2 5V 5.1V 3.0A 0.1A Single Dual Triple Pin 1 Live 2 Ripple and Noise 1% V3 12V 12.5V 0.8A 0.0A Pin 1 V1 V2 V2 Pin 2 NC 2 Power Fail Signal 2ms warning V4 -12V -12.5V 0.8A 0.0A Pin 2 V1 V1 V1 Pin 3 Neutral Power Good Signal Delay after V1 high 100ms, min Pin 3 V1 V1 V1 Pin 4 NC Output Rise Time <40ms Pin 4 Return Return Return Pin 5 Ground INPUT SPECIFICATIONS Pin 5 Return Return Return EMC AND SAFETY SPECIFICATIONS Input Universal AC 90 to 264Vac Pin 6 Return NC V3 Efficiency 85% CE Mark Complies with the LVD Input Frequency 47–63 Hz EMC EN55022-B, CISPR22-B, FCC Part Input Current Full load at low line 2.0Arms, max 15 Class B, MECHANICAL SPECIFICATIONS nd Inrush Current High line, cold start 35A, max EN50082-1, EN60601-1-2 2 Ed. Leakage Current <250µA Agency Approvals VDE, UL, c-UL AC Input Connector J1 Housing Molex 09-50-8031 Pins Molex 08-52-0072 Safety Standards IEC601, EN60601-1-1, UL2601, CSA C22.2 No 601 Class 1 SELV Ground Connector J3 Amp 826708-1 Safety File numbers VDE: 18934-3336 DC Output Connector J2 Housing Molex 09-50-8061 UL: E173812 Pins Molex 08-52-0072 Weight 10oz (200g) Notes 1. Maximum current per output channel. Do not exceed total output power rating 2. Power fail and power good signal on quad output models only 3.000 2.550 0.225
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the ACC-GPS65-3?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
85W Single, Dual, Triple Quad Output AC/DC Power Supplies ACC-HPS85-3
Single, Dual And Triple Output 50W AC/DC Power Supplies ACC-SPS50-3
Cover Kit With Easy Assembly And Low Weight LFWLT100CK
Metal Cover Kit
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods