SPS50 Series MVLT110 Series Single, dual and triple output 50W AC/DC Power Supplies Medical 110W AC/DC Power Supplies • Low cost 50W industry standard package • EN55022-B. FCC Part 15 level B • UL, VDE and CSA safety approvals • Universal input • 3.3V output model 1.08 [27.4] • Fixed switching frequency MAXIMUM Model Output Output Output Current 1 2 3 Number Voltage Max Fan Peak SPS50-1001 V1 3.3V 8.0A 10.0A 10.0A OUTPUT SPECIFICATIONS SPS50-1002 V1 5V 8.0A 10.0A 10.0A Output Power Convection 40W SPS50-1003 V1 12V 3.3A 4.0A 4.0A 6 CFM Fan 50W SPS50-1004 V1 15V 2.6A 3.3A 3.3A Hold-Up Time 115V/230V @ 40W 10ms/20ms SPS50-1005 V1 24V 1.6A 2.0A 2.0A Total Regulation V1 +2% SPS50-1006 V1 48V 0.8A 1.0A 1.0A Min to full load V2, V3 +5% SPS50-2001 V1 5V 4.0A 5.0A 5.0A Transient Response 25% step at 0.1A/µs .82 [20.8] V2 12V 2.0A 2.5A 2.5A Voltage deviation 5%, max MAXIMUM Recovery time <1ms SPS50-2005 V1 5V 4.0A 5.0A 5.0A OVP V1 only 5V 135%, +15% V2 24V 1.0A 1.5A 1.5A Short Circuit Protection Auto Recovery Short Term SPS50-3001 V1 5V 4.0A 5.0A 5.0A 4 Ripple and Noise 3.3V Output 50mV V2 12V 1.5A 2.0A 2.0A pk-pk 5V, 12V, 15V, 24V 1% V3 -12V 0.5A 1.0A 1.0A Output Rise Time <1.0s SPS50-3002 V1 5V 4.0A 5.0A 5.0A 5 Minimum Load Main output 10% V2 15V 1.2A 1.6A 1.6A V3 -15V 0.4A 1.0A 1.0A OUTPUT CONNECTOR J2 INPUT CONNECTOR J1 OUTPUT CONNECTOR J3 SPS50-3003 V1 5V 4.0A 5.0A 5.0A ENVIRONMENTAL SPECIFICATIONS Pin 1 AC Neutral Single Output Quad Output Pin 1 Common V2 12V 2.0A 2.5A 2.5A 1,2,3 Pin 2 AC Line Pins 1,2,3,4 V1 V1 Pin 2 Power Fail/Good V3 -5V 0.4A 1.0A 1.0A Operating Temperature Full power 0 to 50°C Derate to 50% load 51 to 70°C Pins 5,6,7,8 DC Return DC Return SPS50-3004 V1 5V 4.0A 5.0A 5.0A Storage Temperature –40 to 85°C Pins 9,10 NC V2 V2 24V 0.8A 1.0A 1.0A INPUT SPADE CONNECTOR Cooling Convection 40W Pin 11 NC V3 V3 -12V 0.5A 1.0A 1.0A Fan 50W Pin 12 NC V4 SPS50-3005 V1 3.3V 2.8A 4.0A 4.0A GND AC Ground Relative Humidity Non condensing 5% to 95% V2 5V 4.0A 5.0A 5.0A MTBF Demonstrated >150,000 hrs V3 -12V 0.5A 1.0A 1.0A Switching Frequency 65kHz, fixed ACC-SPS50-3 Cover Kit MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Operating Temperature No derating 0 to 50°C AC Input Connector J1 Molex 3 position, 0.156 center EMC AND SAFETY SPECIFICATIONS Linear derate to 50% 51 to 70°C header 26-60-4030 or equivalent INPUT SPECIFICATIONS Storage Temperature –40 to 85°C Ground Connector Spade connector, 0.25” CE Mark Complies with the LVD Cooling Convection/Fan 80W/110W Input Voltage Universal 90-264VAC DC Output Connector J2 Molex 12 position, 0.156 center EMC EN55022-B, CISPR22-B, FCC Part 120-370VDC header 26-60-4120 or equivalent 15 Class B, Relative Humidity Non condensing 95%, max EN50082-1 Efficiency 75% Output Connector J3 Molex 2 position, 0.100 center MTBF MIL-HDBK-217F >200,000 hrs header 22-23-2021 or equivalent Agency Approvals UL, c-UL, Nemko Input Frequency 47–63 Hz Size 3x5x1.08” (76.2x126.9x27.2mm) Safety Standards IEC950, EN60950, UL1950 Input Current Full load at low line 1.0Arms, max Weight 9oz (250g) Safety File numbers Nemko: P99102208 Inrush Current High line, cold start 32A, max UL: E136019 Leakage Current <0.6mA Isolation Voltage Input to output 3000 VAC Notes 1. Continuous output power is limited to 40W with convection cooling. 2. Continuous output power is limited to 50W with 6 CFM fan cooling. 3. Peak loading can be applied for 60 secs with <5% duty-cycle 4. Ripple and noise measured at J2 with 10 µF tantalum and 0.1µF ceramic shunt caps 5. To maintain stated regulation on multiple output units: 0.25<(I1/I2)<5.0 and I1>0.5A 6. This component level power supply is designed to meet the specified immunity stan- dards. MVLT110 Series SPS50 Series Medical 110W AC/DC Power Supplies Single, dual and triple output 50W AC/DC Power Supplies TM • 110W Universal input medical AC/DC • Low leakage current <250µA • EN55022-B, CISPR22-B FCC Part 15 Level B • Small 3x5x1 inch package 4.25" (107.95mm) • Ultra high efficiency >85% 4.00" (101.6mm) • VDE, UL and CSA approvals to IEC601 0.125" (3.175mm) Diameter 0.138" (3.5mm) 1 1 Model Output Nom Set Current Current Min. Number Vout Point No Fan 150LFM Load Maximum Component 2 Height Above PCB 1.15". MVLT110-1300 V1 5V 5.1V 10.0A 15.0A 1.0A 2 MVLT110-1301 V1 12V 12V 6.25A 9.2A 0.2A T2 2 1 1 MVLT110-1302 V1 15V 15V 5.0A 7.3A 0.2A 2 J1 OUTPUT SPECIFICATIONS 2 MVLT110-1303 V1 24V 24V 3.1A 4.6A 0.1A 3 2 MVLT110-1304 V1 48V 48V 1.6A 2.3A 0.1A Hold-Up Time 115V/230V 15ms/18ms MVLT110-4300 V1 5V 5.1V 10.0A 15.0A 1.0A Voltage Set Point V1 +1% 6 V2 12V 12.4V 3.0A 4.1A 0.1A Accuracy V2, V4 +5% J2 V3 +7%,-5% V3 -5V -5.1V 0.8A 1.1A 0.0A J3 Line Regulation Low line to high line 0.3% V4 -12V -12.5V 0.8A 1.1A 0.0A C2 Load Regulation V1 +3% MVLT110-4301 V1 5V 5.1V 10.0A 15.0A 1.0A 50% to full load V2, V4 +5% V2 24V 23.5V 2.0A 2.75A 0.1A V3 +7%,-5% V3 12V 12.5V 0.8A 1.1A 0.0A Transient Response 50% to full load Preferred direction of Air Flow V4 -12V -12.5V 0.8A 1.1A 0.0A Voltage deviation 10%, max 0.125" Recovery time <1ms MVLT110-4302 V1 5V 5.1V 10.0A 15.0A 1.0A (3.175mm) OVP V1 only 5V 6.4V, +0.4V V2 15V 16.0V 3.0A 4.1A 0.1A 3.3V 4.1V, +0.2V V3 -5V -5.1V 0.8A 1.1A 0.0A Overload Protection Primary limited 110 to 160W V4 -15V -16.0V 0.8A 1.1A 0.0A Short Circuit Protection Auto Recovery <6s Short Term OUTPUT CONNECTOR J2 INPUT CONNECTOR J1 MVLT110-4303 V1 5V 5.1V 10.0A 15.0A 1.0A Ripple and Noise 1% Single Dual Triple V2 12V 12.4V 3.0A 4.1A 0.1A Pin 1 Neutral 2 Power Fail Signal TTL active low 1ms warning Pin 1 V1 V2 V2 V3 24V 25.0V 0.8A 1.1A 0.0A Pin 2 Line 2 Power Good Signal Delay after V1 high 100ms, min Pin 2 V1 V1 V1 V4 -12V -12.5V 0.8A 1.1A 0.0A Output Rise Time <40ms Pin 3 V1 V1 V1 MVLT110-4304 V1 3.3V 3.3V 10.0A 15.0A 1.0A Pin 4 Return Return Return INPUT SPADE CONNECTOR V2 5V 5.1V 3.0A 4.1A 0.1A Pin 5 Return Return Return V3 12V 12.5V 0.8A 1.1A 0.0A TOTAL OUTPUT POWER RATING GND Ground Pin 6 Return NC V3 V4 -12V -12.5V 0.8A 1.1A 0.0A Cooling Convection Fan Vin >100V Fan Vin <100V Single output 75W 110W 100W INPUT SPECIFICATIONS Quad output 75W 110W 100W MECHANICAL SPECIFICATIONS VLT110-4304 70W 98W 98W AC Input Universal 90 to 264V Efficiency 85% AC Input Connector J1 Housing Molex 09-50-8031 Pins Molex 08-52-0072 Input Frequency 47–63 Hz EMC AND SAFETY SPECIFICATIONS Ground Connector J3 Amp 826708-1 Input Current Full load at low line 2.6Arms, max CE Mark Complies with the LVD DC Output Connector J2 Housing Molex 09-50-8061 Inrush Current High line, cold start 35A, max Pins Molex 08-52-0072 EMC EN55022-B, CISPR22-B, FCC Part Leakage Current <250µA 15 Class B, EN50082-1 Weight 10oz (200g) Harmonic Correction EN61000-3-2 Class A Notes 1. Maximum current per output channel. Do not exceed total output power rating Agency Approvals VDE, UL, c-UL 2. Power fail and power good signal on quad output models only Safety Standards IEC950, EN60950, UL1950, CSA C22.2 No 950 Class 1 SELV Safety File numbers VDE: 18934-3336 UL: E173812 2.50" (63.5mm) 2.25" (57.15mm)