Manufacturers
ERNI ELECTRONICS 043335
Description
Alignment Module, Cadmium Yellow RAL 1021
043335
Part Number
043335
Price
Request Quote
Manufacturer
ERNI ELECTRONICS
Lead Time
Request Quote
Category
Thermal Management » Misc Products
Specifications
Manufacturer
ERNI Electronics
Manufacturers Part #
043335
Lead Time
18 Week Lead Time
Industry Aliases
043335, 43335
Sub-Categories
Miscellaneous Tools and Supplies
Factory Pack Quantity
500
Datasheet
Extracted Text
ERNI Pre-Alignment Modules Provides reliable connection, coding and grounding of plug-in cards ERNI has developed a solution to the dilemma posed by high through a large diameter. A corresponding derating curve is pin-count hard-metric (HM) connectors and the need for preci- available. This large pin diameter enables a wide capture range sion connector mating combined with sufficient play between of >2mm. The PCB is adequately centred and guided as a subrack guide rails and printed-circuit board (PCB) cards. The result of the appropriate length. answer is ERNI’s pre-alignment module. The pre-alignment pin with fastening thread is fastened on the According to the IEC 61076-4-101 standard, a 2mm HM con- backplane and is available for PCB thicknesses of 2.5 to 6mm, nector may have hundreds of contacts. At the same time, the and 6 to 8mm. The guide bush is mounted on the daughter plug-in board connectors and backplane connectors must mate card with an M4 or M5 screw. The PCB thickness for the precisely in order to avoid damage. On the other hand, there daughter card can be 1.6 to 3.5mm, or 3.5 to 5.5mm. must be play between the cards and rails to avoid compression stress on the PCB. ERNI’s pre-alignment module consists of solid metal guides and new guiding systems that offer several optional functions. For example, there is a kit available with an integrated socket for HM “coding” keys. Thus no coding on the connector side is needed, which offers more room for signal contacts. In addition, there are flattened pre-alignment pins designed to match their mating connector counterparts. Using an octagonal pattern, it will support eight additional coding options. A further reasonable additional option is the electrical contact model. Shielding is low restistant because of gold plating, and therefore allows electric current to flow with 40A at 20°C 1 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 Applications 2 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 Pre-alignment Modules with Electrical Contact Guide Bush Dimensional Drawing 28,4 20,25 7,8 Gewindetiefe 7 depth of thread Layout backplane 10,6 2,34 +0,2 9,8 6,5 0,03 3,1 daughtercard Ordering Informations Description Part Number Guide bush with thread M4 144641 Kit (Guide bush M4, screw M4x8 with thread locker) 164307 Kit M5 on request. 3 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 15,4 3,4 9,8 3,9 3,4 0,2 15,4 10,5 3 -0,2 0,1 5,5 for M5 0,1 (ø4,5 for M4) 0,1 7 0,05 14 +0,5 19 R1 R0,5 Guiding Pin Gold Plated Dimensional Drawing A B E Layout 6 D 0,03 4,3 144768 144769 C F 12 6 - 8 24 3 6.5 144769 4.5 13.8 22.2 1.2 6.5 6 - 8 144742 6.3 1.8 ø6 1) 9.7 24 3 7.2 1.5 144768 2.5- 6 Tochterkarte 1) daughtercard 11.5 22.2 1.2 7.2 3.3 1.8 ø6 2.5- 6 144741 Ident-Nr. Backplanestärke F C E G AB D thickness of backplane Part-No. 1) unter 3.2mm zusätzlich Unterlegscheibe verwenden. 144741 up to 3.2mm use washer additional. 0,03 4,3 144742 Base Plate 9,8 Tochterkarte daughtercard 3 3 8 Ordering Informations Description PCB Thickness Part Number Guiding pin to fit on backplane without base plate 2.5 - 6.0mm 144768 Guiding pin to fit on backplane without base plate 6.0 - 8.0mm 144769 Guiding pin use only with base plate 2.5 - 6.0mm 144741 Guiding pin use only with base plate 6.0 - 8.0mm 144742 Kit without base plate (Guiding pin, washer, nut M4) 2.5 - 6.0mm 214361 Kit without base plate (Guiding pin, washer, nut M4) 6.0 - 8.0mm 214362 Kit with base plate (Guiding pin, washer, nut M4, base plate) 2.5 - 6.0mm 214363 Kit with base plate (Guiding pin, washer, nut M4, base plate) 6.0 - 8.0mm 214364 Base plate 134734 4 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 8,5 4,2 M4 18,45 2,4 5 G 7,5 Bauteilseite Bauteilseite component side component side 0,05 2,5 0,2 10,5 0,05 8,5 0,2 10,5 Pre-alignment Modules without Electrical Contact Guide Bush Dimensional Drawing 7,8 Layout Gewindebohrung 4,5 tief thread drilling 4,5 deep backplane +0,2 9,8 18 0,03 3,1 daughtercard Ordering Informations Description Part Number Guide bush with thread M4 154058 Guide bush with thread M5 134726 Kit for PCB thickness 1.5 - 2.0mm (Guide bush M5, screw M5x6, washer) 144127 Kit for PCB thickness 2.0 - 4.5mm (Guide bush M5, screw M5x8, washer) 144128 Kit M4 on request. 5 www.ERNI.com/contact/ Catalog E XXXXXX 01/16 Edition 1a 9,8 10,5 9,8 3,2 15,4 0,2 15,4 3 -0,2 0,1 5,5 for M5 0,1 (ø4,5 for M4) 0,1 7 0,05 14 +0,5 19 R1 R0,5 Guiding Pin Dimensional Drawing A B E Layout 6 D 0,03 4,3 144078 134733 C F 12 6 - 8 144078 24 3 6.5 4.5 13.8 22.2 1.2 6.5 6 - 8 144077 6.3 1.8 ø6 Tochterkarte daughtercard 1) 1.5 9.7 24 3 7.2 2.5- 6 134733 1) 11.5 22.2 1.2 7.2 3.3 1.8 ø6 2.5- 6 134732 Ident-Nr. Backplanestärke 144077 E F C G AB D Part-No. thickness of backplane 0,03 4,3 134732 1) unter 3.2mm zusätzlich Unterlegscheibe verwenden. up to 3.2mm use washer additional. Tochterkarte daughtercard Ordering Informations Description PCB Thickness Part Number Guiding pin to fit on backplane without base plate 2.5 - 6.0mm 134733 Guiding pin to fit on backplane without base plate 6.0 - 8.0mm 144078 Guiding pin use only with base plate 2.5 - 6.0mm 134732 Guiding pin use only with base plate 6.0 - 8.0mm 144077 Kit without base plate (Guiding pin, washer, nut M4) 2.5 - 6.0mm 144370 Kit without base plate (Guiding pin, washer, nut M4) 6.0 - 8.0mm 144371 Kit with base plate (Guiding pin, washer, nut M4, base plate) 2.5 - 6.0mm 144131 Kit with base plate (Guiding pin, washer, nut M4, base plate) 6.0 - 8.0mm 144132 Base plate 134734 Additional versions upon request. 6 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 4,2 M4 5 G 7,5 Bauteilseite Bauteilseite component side component side 0,05 2,5 0,2 10,5 0,05 8,5 0,2 10,5 Pre-alignment Modules with Coding Guide Bush Layout Dimensional Drawing backplane A A +0,2 9,8 Gewindebohrung M5; 4,5 tief thread drilling M5; 4,5 deep 18 0,03 3,1 daughtercard Ordering Informations 1) Description Component Part Number Kit Part Number Guide bush with coding 0°/360° 194548 204399 Guide bush with coding 45° 194547 204398 Guide bush with coding 90° 194546 204397 Guide bush with coding 135° 194553 204404 Guide bush with coding 180° 194552 204403 Guide bush with coding 225° 194551 204402 Guide bush with coding 270° 194550 204401 Guide bush with coding 315° 194549 204400 1) Kit with screw M5x6 and washer. 7 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 9,8 7,8 10,5 9,8 3,2 15,4 0,2 15,4 3 -0,2 0,1 5,5 for M5 0,1 (ø4,5 for M4) 0,1 7 0,05 14 +0,5 19 Guiding Pin Layout Dimensional Drawing A 24 0,03 7,5 4,3 4 6,5 Tochterkarte daughtercard Base Plate 9,8 8 3 3 Ordering Informations Description Part Number Guiding pin 194543 Base plate 194542 Kit (Guiding pin, base plate, washer, nut M4) 204395 8 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 8,5 4,2 18,45 M4 2,4 5 Bauteilseite component side +0,05 2,5 0,05 8,5 0,2 10,5 Pre-alignment Modules Inverse Pin with Guide Bush Dimensional Drawing 21 1 9,8 34,6 deep M5; Tiefe/ 4.5 50,6 Layout 18 0,03 3,1 Ordering Informations Description Part Number Kit (Pin with guide bush) 204219 Piece parts on request. 9 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 9,8 3 -0,2 5,5 3,2 15,4 0,1 7 0,05 14 Coding Keys Coding Keys for Base Plate Coding Keys for Guide Bush Coding Key Color Part Number Coding Key Color Part Number Pastel Orange Pastel Orange RAL 2003 043342 RAL 2003 043332 Fincke 00233197 Fincke 00233197 Steel Blue Steel Blue RAL 5011 043343 RAL 5011 043333 Fincke 00251197 Fincke 00251197 Slate Gray Slate Gray RAL 7015 043344 RAL 7015 043334 Fincke 00235197 Fincke 00235197 Cadmium Yellow Cadmium Yellow RAL 1021 043345 RAL 1021 043335 Fincke 00252197 Fincke 00252197 Reseda Green Reseda Green RAL 6011 043346 RAL 6011 043336 Fincke 00237197 Fincke 00237197 Brilliant Blue Brilliant Blue RAL 5007 043347 RAL 5007 043337 Fincke 00245197 Fincke 00245197 Blue/Lilac Blue/Lilac RAL 4005 043348 RAL 4005 043338 Fincke 00246197 Fincke 00246197 Ocher Yellow Ocher Yellow RAL 1024 043349 RAL 1024 043339 Fincke 00313197 Fincke 00313197 Strawberry Red Strawberry Red RAL 3018 043350 RAL 3018 043340 Fincke 00312197 Fincke 00312197 Hazel Hazel RAL 8011 043351 RAL 8011 043341 Fincke 00272197 Fincke 00272197 10 www.ERNI.com/contact/ Catalog E XXXXXX 01/05 Edition 1 Printed in Germany · Subject to modification without prior notice.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 043335?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Enclosures LDG-A, Cover 014415
Enclosures LDG-A Cover 014417
Enclosures LDG-A Cover 014818
Enclosures LDG-A Cover 014820
Base Part of Enclosure 110mm without Ventilation Slots, Light Gray 024082
Base Part of Enclosure with Ventilation Slots, Light Gray 024870
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods