CompactPCI Connectors acc. to PIGMG 2.0 Rev. 3.0 type B with long connection pins for AB transfer and AB shrouds are inserted into position rP2. At the rear card end, on position rJ2, a sheilded female connector in build type AB is specified. For 6 HE backplanes, on P3 and P5, the male connector - build type B with long connection pins - for AB transfer and AB shrouds have to be inserted into positions rP3 and rP5. At the rear card end, on positions rJ3 and rJ5, a shielded female connector, build type AB, has been specified here. On P4, a blade contact strip, build type A with long connection pins for A shroud and A shroud frames, has been specified on position rP4. For the rear card end, a shielded female connector, build type A, has been defined on rJ4. For male connectors with shrouds in build types A and B, the specification only requires a series General a grounding for the upper screening panel. Late in 1999 PCI Industrial Computer Manufacturers Group All necessary connectors required in accordance with the (PICMG) introduced the new revision 3.0 of the Compact- new CompactPCI specification are available from ERNI. In PCI Core Specification. Version 3.0 of this specification addition, for CompactPCI applications, ERNI also offers an comprises a.o. hot swap and computer telephony specifi- economic solution for a male connector with long terminal cations such as pin sequencing. For CompactPCI, the pins, which is populated with shield contacts on row a only. metric ERmet connectors are specified in accordance with In addition to the new AB compatible male connectors for IEC 61076-4-101 which are available in build types A, B, CompactPCI, ERNI also supplies shrouds. Here, all shrouds AB, and as monoblock versions. This new version of the are available in four different heights (3.9 mm, 4.5 mm, 5.3 CompactPCI specification has the consequence a.o. that mm, and 6.1 mm) in order to adapt to the printed circuit for 3 HE backplanes on position P2 a male connector, build board thickness of the backplanes. Catalog E 074486 01/15 Edition 2 1 CompactPCI Connectors acc. to PIGMG 2.0 Rev. 3.0 Ordering Informations Male Connectors For Backplanes Location On Number Of Contact Part Number The PCB Positions* Loading* Type A With Peg P1 25 CB---BC 923190 Type A With Peg And Extended Terminals For Shrouding P1 Special 25 TP---PT 923197 Type A Without Peg And With Extended Terminals P1 25 TS---ST 923342 Type B (AB Compatible) With Extended Terminals For Shrouding P2, P5 22 TSSSSS- 923345 Type B (AB Compatible) With Extended Terminals For Shrouding P3 19 TSSSSST 923341 Type B (AB Compatible) With Extended Terminals For Shrouding P3 19 TSSSSS- 923346 Type A With Extended Terminals For Shrouding P4 25 S----ST 923347 Type A With Peg And Extended Terminals For Shrouding P4 25 TRRRRRT 064688 Type A With Peg And Extended Terminals For Shrouding P4 25 TSSSSST 103975 Type B (AB Compatible) With Extended Terminals For Shrouding P5 Telecom 22 ------- 923339 Type B (AB Compatible) With Extended Terminals For Shrouding P2, P5 22 TSSSSST 923340 Female Connectors For Daughter Cards Location On Number Of Part Number The PCB Positions* Type A With Shield, Without Peg J1, J4 25 354142 Type A With Split Shield, Partially Loaded J4 Telecom 25 104512 Type A With Split Shield, Partially Loaded rJ4 Telecom 25 104697 Type AB With Shield, Without Peg rJ2, rJ5 22 114809 Type AB With Shield, Without Peg rJ3 19 134075 Type B With Upper Shield J2, J5 22 354148 Type B With Upper Shield J3 19 354146 Shrouds For Male Connectors Location On Number Of Height Part Number The PCB Positions* (mm) Type A Shroud 25 Positions rP1, rP4 25 14.35 114436 Type A Shroud 25 Positions rP1, rP4 25 14.95 054795 Type A Shroud 25 Positions rP1, rP4 25 15.75 054794 Type A Shroud 25 Positions rP1, rP4 25 16.55 054793 Type AB Shroud 22 Positions rP2, rP5 22 14.95 114426 Type AB Shroud 22 Positions rP2, rP5 22 15.75 114427 Type AB Shroud 22 Positions rP2, rP5 22 16.55 114428 Type AB Shroud 19 Positions rP3 19 14.35 114487 Type AB Shroud 19 Positions rP3 19 14.95 114488 Type AB Shroud 19 Positions rP3 19 15.75 114489 Type AB Shroud 19 Positions rP3 19 16.55 114490 Coding Keys Application Code Color Part Number Number Coding Keys For Male Connectors And Shrouds 5.0 Volts P1 1567 Brilliant Blue 043347 Coding Keys For Male Connectors And Shrouds 3.3 Volts P1 3456 Cadmium Yellow 043345 Coding Keys For Male Connectors And Shrouds Telecom P4 1248 Strawberry Red 043350 Coding Keys For Female Connectors 5.0 Volts J1 2348 Brilliant Blue 043337 Coding Keys For Female Connectors 3.3 Volts P1 1278 Cadmium Yellow 043335 Coding Keys For Female Connectors Telecom J4 3567 Strawberry Red 043340 * Length = 50mm; Pitch = 2.0mm => 50 / 2 = 25 Positions **Cross Sectional Loading From Z To F Catalog E 074486 01/15 Edition 2 2 Bestueckungsplan - contact layout 25 15 11 8 5 1 e d c b a = bestueckt - assemble 25 15 11 8 5 1 e d c b a EE - Zone fuer durchkontaktierte 2 2 ± 0.05 Loecher Ş 0.6 10 x 2 = 20 8 10 x 2 = 20 Compliant zone for thru hole Abschirmblech - shielding Abschirmblech - shielding Ş 0.6 ± 0.05 104514 104515 50 max. 3 - 0.4 + 0.2 0.5 2 + + 0.1 0.1 21.9 9.5 - - 11.4 Anforderungsstufe Id.-Nr. Datum class date 12.25 Lochbild fuer Leiterplatte Board hole pattern ( Bestueckungsseite ) ( Component mounting side ) 8 10 x 2 = ( 20 ) 10 x 2 = ( 20 ) 0.1 + 0.05 0.6 2 alle Loecher - all holes durchkontaktiert, ± 0.02 Bohrloch 0.7 plated thru, ± 0.02 drill hole 0.7 f e d c b a 25 15 13 11 1 Fehlende Masse und Angaben nach IEC 61076 - 4 - 101 Missing information and dimensions per IEC 61076 - 4 - 10 XXXXXXXX Information : 2:1 Abschirmblech oben montiert XXXXX shielding mounted on top ohne Fixierstift - without locating pegs ERmet Federleiste A ERmet Female Type A 104512 5 x 2 = ( 10 ) 4 x 2 = 8 2 21 2 1.5 10.8 - 0.2 + 0.05 1.7 - Bestückungsplan - contact layout 2 1 e d c b a = bestückt - assemble 2 1 e d c b EE-Zone für a durchkontaktierte 2 Löcher [ 0.6 60.05 Compliant zone for 21 x 2 = 42 thru hole 60.05 [ 0.6 3 -0.4 44max. 2 11.4 Anforderungsstufe Id.-Nr. Datum class date 13.85 Lochbild für Leiterplatte Board hole pattern (Component mounting side) (Bestückungsseite) 21 x 2 = (42) 0.1 + 0.6 0.05 2 alle Löcher - all holes durchkontaktiert, plated thru, Bohrloch 0.7 drill hole 0.7 f e d c b a 2 1 Fehlende Masse und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 2:1 Information : Toleranc Scal Abschirmblech oben shielding mounted on top Designation All rights ERmet Federleiste AB 22 Only for To insure that this is the version of this drawing, ERmet Female Type AB 22 contact one of the ERNI before Elektroapparate Subject to modification I 114809 prior D-73099 Drawing will not be 4 x 2 = 8 5 x 2 = (10) 21 2 2 10.8 -0.2 1.5 1.760.05 1 22 XXXX ERNI 114809 2 Bestückungsplan / contact layout 22 1 e d c b a = bestückt / assembled 22 1 e d c b a 2 21 x 2 = 42 Abschirmblech / shielding EN-Zone für durchkontaktierte 3 -0,4 Löcher Ø0,6 ±0,05 44 max. 2 compliant zone for thru hole Ø0,6 ±0,05 11,4 1) Ø 0.6 ±0.05 Durchmesser des metallisierten Loches Ø 0.6 ±0.05 Diameter of finished plated-through hole Lochbild für Leiterplatte Board hole pattern (Bestückungsseite) (Component mounting side Ø 0.7 ±0.05 Bohrungsdurchmesser des Loches Ø 0.7 ±0.05 Diameter of drilled hole 21 x 2 = (42) Schichtaufbau im metallisierten Loch 0,05 siehe Zeichnung 114406 2 1) alle Löcher Metal plating of plated through hole all holes see drawing 114406 f e d c b a 22 1 Fehlende Maße und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 Abschirmblech oben montiert Information: Tolerances Scale 2:1 shielding mounted on top All Dimensions Anforderungsstufe 2 / class 2 in mm BA2 Designation All rights reserved. Only for Information. Subject to modification without ERmet Federleiste B22 To ensure that this is the latest prior notice. version of this drawing, please Drawing will not be updated. ERmet Female Type B22 contact one of the ERNI companies before using. I www.ERNI.com 354148 b 25.06.2012 A3 Index Date Class ERMB22 5 x 2 = (10) 2 4 x 2 = 8 2 21 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1,5 10,8 1,9 14,8 11,6 49,9 2 2 10 x 2 = 20 8 10 x 2 = 20 Dimension Nr. Tolerances Scale 5:1 Tool-Nr.: Material siehe Einzelteile All Dimensions 054793 16.55 in mm see pieceparts All rights reserved. Date Name 054794 Designation 15.75 Only for information. To insure that this is the latest ERmet A Übergaber. m. Klemmst 054795 14.95 version of this drawing, please contact one of the ERNI companies ERmet A Shroud with clamp part before using. 14.35 114436 Subject to modification without Elektroapparate GmbH prior notice. D Ident-Nr. Mass H Drawing will not be updated. 054792 D-73099 ADELBERG I.D. number dimension H Index Modification Nr. Date Name Class O:00010255.SZN Consider protection memo from DIN 34 2 6 x 2 = 12 3,9 14,35 H 11,6 43,9 21 x 2 = 42 2 Dimension Nr. Tolerances Scale 5:1 Tool-Nr.: 16.55 114428 Material siehe Einzelteile All Dimensions in mm see pieceparts 15.75 114427 Date Name All rights reserved. Designation Only for information. 14.95 To insure that this is the latest 114426 ERmet AB 22 Überga. m. KLemmst. version of this drawing, please contact one of the ERNI companies ERmet AB 22 Shroud with clamp 114425 14.35 before using. Subject to modification without Elektroapparate GmbH prior notice. D Ident-Nr. Maß H D-73099 ADELBERG 114429 Drawing will not be updated. dimensions H I.D.number Index Modification Nr. Date Name Class O:00010299.SZN 15,4 Consider protection memo from DIN 34 2 6 x 2 = 12 14,8 3,9 14,35 H 11,6 37,9 18 x 2 = 36 2 5:1 Dimension Nr. Tolerances Scale Tool-Nr.: 114490 16.55 Material siehe Einzelteile All Dimensions in mm see pieceparts 114489 15.75 Date Name All rights reserved. Designation Only for information. To insure that this is the latest ERmet AB 19 Überg. m. Klemmst. 114488 14.95 version of this drawing, please contact one of the ERNI companies ERmet AB 19 Shroud with clamp. 114487 14.35 before using. Subject to modification without Elektroapparate GmbH prior notice. D Maß H Ident-Nr. 114486 Drawing will not be updated. D-73099 ADELBERG I.D.number dimensions H Index Modification Nr. Date Name Class O:00010296.SZN 15,4 Consider protection memo from DIN 34 2 6 x 2 = 12 14,8 3,9 14,35 H Catalog E 074482 02/00 Edition 1 Coding Keys Ordering Information Coding keys for male connectors and shrouds Coding keys for female connectors Coding Key Code Colour Part Number Coding Key Code Colour Part Number No. No. Pastel Orange Pastel Orange RAL 2003 RAL 2003 3568 043342 043332 1247 Fincke 00233197 Fincke 00233197 Steel Blue Steel Blue RAL 5011 RAL 5011 3478 043343 1256 043333 Fincke 00251197 Fincke 00251197 Slate Grey Slate Grey RAL 7015 RAL 7015 3467 043344 1258 043334 Fincke 00235197 Fincke 00235197 Cadmium Yellow Cadmium Yellow RAL 1021 RAL 1021 3456 043345 1278 043335 Fincke 00252197 Fincke 00252197 Reseda Green Reseda Green RAL 6011 RAL 6011 2578 043346 1346 043336 Fincke 00237197 Fincke 00237197 Brilliant Blue Brilliant Blue RAL 5007 RAL 5007 1567 043347 2348 043337 Fincke 00245197 Fincke 00245197 Blue/Lilac Blue/Lilac RAL 4005 RAL 4005 1356 043348 2478 043338 Fincke 00246197 Fincke 00246197 Ocher Yellow Ocher Yellow RAL 1024 RAL 1024 4678 043349 1235 043339 Fincke 00313197 Fincke 00313197 Strawberry Red Strawberry Red RAL 3018 RAL 3018 1248 043350 3567 043340 Fincke 00312197 Fincke 00312197 Nut Brown Nut Brown RAL 8011 RAL 8011 1236 043351 4578 043341 Fincke 00272197 Fincke 00272197 Mounting Device 053593 For Coding-Keys http://Connect.ERNI.com/contact/ Schichtaufbau im metallisierten Loch fuer EE-Kontakt Metal plating of plated-through hole for EE-contact Bohrungsdurchmesser + 0.02 ş 0.7 - des Loches Diameter of drilled hole Durchmesser des + 0.05 ş 0.6 - metallisierten Loches Diameter of finished plated-through hole min. 0.1 Restringbreite Restring width max. 15 µm Sn / SnPb min. 25 µm Cu fuer Einpresszone D = 0.72 for press-fit zone D = 0.72 10:1 Lochaufbau D=0.6 Hole design D=0.6 114406