GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Features • Compact size 50.8 mm x 101.6 mm x 36.1 mm 3 (2 in x 4 in x 1.4 in) with density of 13.4W/in • Universal AC Input Range (90 – 265VAC) • Output voltage of 12V (adjustable -2.5/+5%) • Maximum output current of 12.5A@ 12Vout (150W) • High efficiency • Full load capability at 75ºC and 1m/s (200LFM) airflow with derating at higher temperatures or lower airflows • Output overcurrent protection (non-latching) • Overtemperature protection • Output overvoltage protection • Up to 11ms of holdup time • Active power factor corrected input • Conducted EMI - meets CISPR22 (EN55022) and FCC Class B requirements • Meets IEC61000-4-5, Level 4 (2kV/4kV) Applications • Compliant to RoHS EU Directive 2002/95/EC • Telecommunications equipment • UL and cUL approved to UL/CSA60950-1, TUV • Embedded Computing (EN60950-1), CE Mark (for LVD) and CB Report available • Storage Systems • ISO** 9001 and ISO 14001 certified manufacturing facilities • Industrial equipment Description In a small 2 x 4 inch footprint, the 12Vdc single-output CLP0112 open frame power supply delivers greater than 90 percent typical power efficiency and full load output at 75˚C. With its small size, t he CLP series is specifically designed to handle power challenges associated with tight space and low airflow. The CLP series utilizes a unique design approach at this power level, leveraging zero voltage switching techniques in conjunction with quasi-resonant power factor correction (PFC) circuits. Protection features include overcurrent (OCP), overvoltage (OVP), and overtemperature (OTP). * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. ‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All rights reserved. GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Min Max Unit Input Voltage - Continuous All 90 265 Vac For up to 10 seconds max. All 90 275 Vac Operating Ambient Temperature All -40 85 °C (see Thermal Considerations section) (in sealed enclosure applications with thermally conductive pad to All -40 55 °C enclosure, PO,max = 130W) Storage Temperature All -40 85 °C Humidity (non-condensing) All 5 95 % Altitude All 5000 m All Isolation Voltage – Input to output 3000 Vac Input to safety ground All 1500 Vac All Outputs to safety ground 50 Vac † Ambient temperature outside the sealed enclosure containing the power supply. Electrical Specifications Parameter Device Min Typ Max Unit Operating Input Voltage All 90 115/230 265 Vac Input Source Frequency All 47 50/60 63 Hz Input Current (V = 90Vac) All 3 A IN RMS Input Power Factor (115VAC or 230VAC in at full load) All 0.95 Inrush Transient Current (VIN = 265Vac, Tamb = 25ºC) All 100 A Peak Leakage Current to earth ground (VIN = 265Vac) All 2 mA Output Voltage Setpoint All 12 Vdc Output Voltage Tolerance (due to set point, temperature variations, All -3 3 % load and line regulation) Output Voltage Adjustment Range All 11.7 12.6 Vdc Output Load Regulation All 1 %Vout Output Line Regulation All 0.5 %Vout Output Ripple and Noise – measured with 0.1µF ceramic capacitor in 1 parallel with 10µF tantalum capacitor, at 25°C All 180 mV p-p Peak-to-peak (20MHz Bandwidth) Dynamic Load Response – 50% to 75% load transient, 0.1A/µs slew rate. Output voltage deviation All 5% % Settling Time All 500 µs Output Current All 0 12.5 Adc Output Current Limit Inception All 110 145 % I O,max Maximum Output Capacitance All 5000 µF Efficiency at 25°C: V = 230Vac, 20% load All 89.3 % IN 50% load All 92.9 % 100% load All 92.7 % V = 115Vac, 20% load All 87.7 % IN 50% load 90.9 % All 100% load All 90.5 % 2 Holdup Time – V = 115Vac or 230Vac, 100% load All 11 ms IN Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 1 Below -25°C, ripple may exceed the specified level. Specification will be met after warm up period of 15s. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 2 Holdup time may be lower at cold temperatures power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 2 GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power General Specifications Parameter Device Symbol Typ. Unit 9 FIT 201.6 10 /Hours Calculated Reliability based on Telcordia SR-332 Issue 2: Method 1 Case All 3 (V =230Vac, I = 12.5A, T = 40ºC, airflow 200LFM, 90% confidence) IN o A MTBF 4,960,060 Hours 184 g Weight All 6.5 oz. Feature Specifications Parameter Device Min Typ Max Unit Output Voltage Rise Time (from 10 to 90% of final value) All 4.2 ms 3 Delay from Input being applied to all outputs being in regulation All 1000 ms Output Overvoltage Protection (for main output currents above 0.1A) All 13.8 17 Vdc 4 Input Undervoltage lockout Turn-on Threshold (100% load) All 83 90 Vac Turn-off Threshold (100% load) All 72 88 Vac Environmental Specifications Parameter Device Specification Conducted Emissions All CISPR22 (EN55022) Class B with 3dB margin 5 Radiated Emissions All CISPR22 (EN55022) Class B with 3dB margin Input Harmonics All EN61000-3-2 ESD All IEC 61000-4-2, Level 3 6 Radiated Immunity All IEC 61000-4-3, Level 2 Electrical Fast Transient Common Mode All IEC 61000-4-4, Level 3 Surge Immunity All IEC 61000-4-5, Level 4 Conducted RF Immunity All IEC 61000-4-6, Level 3 Voltage Dips All EN61000 4.11, Level 3, Class B, C Shock and Vibration All IPC-9592B 3 Met when temperature is above -25°C and restart duration is ≤ 20s. 4 Undervoltage lockout threshold may vary with output load current level – decreasing as load goes lower Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 5 Shall be met when tested in a suitable enclosure Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 6 Shall be met when tested in a suitable enclosure power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 3 GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Characteristic Curves The following figures provide typical characteristics for the CLP0112 power supply 95% 15 90% Vin=230V 10 85% 2m/s Vin=115V (400LFM) 80% 0.5m/s (100LFM) 5 1m/s 75% (200LFM) NC 70% 0 2 4 6 8 10 12 14 0 25 35 45 55 65 75 85 O OUTPUT LOAD, A AMBIENT TEMPERATURE, T C A Figure 1. Power Supply Efficiency versus Output Current. Figure 2. Derating Output Current versus Ambient Temperature and Airflow. Data shown for 115VAC in, at 230VAC in derating is the same or better. For derating at other input voltages, consult the GE Technical representative. TIME, t (10ms/div) TIME, t (5ms /div) Figure 3. Typical output ripple and noise (VIN = 230Vac, Figure 4. Transient Response to Dynamic Load Change from 100% load ). 50% to 100% at Vin = 230Vac. TIME, t (200ms/div) TIME, t (10ms/div) Figure 5. Typical Start-up (VIN = 115Vac). Figure 6. Typical Start-up (VIN = 230Vac) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 4 (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE INPUT VOLTAGE OUTPUT VOLTAGE VO (V) (2V/div) VIN (V) (200V/div) EFFICIENCY, η (%) VO (V) (50mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE OUTPUT VOLTAGE INPUT VOLTAGE IO (A) (5Adiv) VO (V) (100mV/div) OUTPUT CURRENT, Io (A) VO (V) (2V/div) VIN (V) (200V/div) GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Characteristic Curves (cont.) The following figures provide typical characteristics for the CLP0112 power supply TIME, t (10ms/div) TIME, t (10ms/div) Figure 7. Typical Hold-up waveforms (VIN = 115V, 100% Figure 8. Typical Hold-up waveforms (VIN = 230V, 100% load). load). Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 5 (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE INPUT VOLTAGE V (V) (2V/div) V (V) (200V/div) O IN OUTPUT VOLTAGE INPUT VOLTAGE V (V) (2V/div) V (V) (200V/div) O IN GE Eneregy CLP0112 SERIES 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” Data Sheet GE CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Output Voltage Adjustment Safety Considerations The CLP0112 power supply is intended for inclusion in other equipment and the installer must ensure that it is in compliance with all the requirements of the end application. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand-alone product. The power supply meets Class 1, IEC60950, EN60950, with the following deviations: Nemko. UL 60950 (Recognized Component) C-UL (Canadian Approval by UL). Feature Descriptions Overcurrent Protection To provide protection in a fault condition (output overload), the power supply is equipped with internal current-limiting circuitry and can endure current limiting continuously. At the point of current-limit inception, the unit enters hiccup mode. Fig. 9. Diagram showing location of the potentiometer The power supply operates normally once the output current is used to adjust the power supply output voltage. brought back into its specified range. The output voltage can be adjusted between 11.7V and 12.6V Overvoltage Protection using a potentiometer on the power supply. See Fig. 9 for a diagram showing location of the potentiometer. Overvoltage protection is a feature of the CLP0112 power supply that protects both the load and the power supply from an output overvoltage condition. When an overvoltage occurs, the power supply shuts down and latches off. It is then necessary to recycle the input to restart the power supply when this protection is activated. Overtemperature Protection The CLP0112 also features overtemperature protection in order to provide additional protection in a fault condition. The power supply is equipped with a thermal shutdown circuit which detects excessive internal temperatures and shuts the unit down. Once the power supply goes into overtemperature shutdown, it will cool before attempting to restart. The overtemperature protection circuit will typically activate when the unit is operated at 150W output with an ambient temperature of 80ºC and 1m/s (200LFM) airflow. Please note that at ambient temperatures of 75°C or higher and very low airflow conditions, the unit may need to have input voltage recycled before it turns back on from an OTP fault. Input Undervoltage Lockout At input voltages below the input undervoltage lockout limit, power supply operation is disabled. The power supply will begin to operate at an input voltage above the undervoltage lockout turn-on threshold. Note that the undervoltage lockout limits are load dependent and the power supply turns ON and can operate at much lower input voltage levels when at light or no load. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 6 GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Table 1. Output Power Capability when the CLP0112 is Thermal Considerations operated in a sealed enclosure with thermal pad for The power supply can be operated in a variety of thermal conduction cooling. environments; however sufficient cooling should be provided to ensure reliable operation. Ambient Temperature (ºC) Max. Output Power (W) 25 150 Considerations include ambient temperature, airflow, power 40 150 supply dissipation and the need for increased reliability. A 55 130 reduction in the operating temperature of the power supply will result in increased reliability. The thermal data presented . here is based on measurements taken in a wind tunnel. Heat Transfer via Convection Increased airflow through the power supply enhances the heat transfer via convection. Figure 10 shows the preferred airflow direction. Contact your GE technical representative for derating information in other airflow directions. Fig. 10. Preferred airflow direction for cooling. Operation In a Sealed Enclosure The CLP0112 power supply can also be operated in a sealed enclosure provided proper means for removing heat from the power supply are used. Figure 11 shows an arrangement where a thermally conductive pad is used to transfer heat from the bottom of the power supply into the enclosure. Under such conditions, the power supply is capable of reduced power operation as shown in Table 1. Note that the Ambient Temperature shown in Table 1 is that outside the sealed enclosure, the CLP0112 may see higher ambient temperatures. Enclosure Wall Thermally Conductive Pad Fig. 11. Example arrangement of the CLP0112 for sealed enclosure applications. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 7 GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power EMI performance All CLP0112 power supplies are specified to meet conducted Class B EMI requirements per CISPR 22 (EN55022) with at least 3dB of margin. Results of tests conducted without any external filtering are shown below. CLP0112FPXXXZ01A (115VAC in, 12V @ 150W out, Negative of Output Grounded) CLP0112FPXXXZ01A (230VAC in, 12V @ 150W out, Negative of Output Grounded) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 8 GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Mechanical Outline Dimensions are in millimeters. Tolerances: x.x mm ± 0.5mm [unless otherwise indicated] x.xx mm ± 0.25mm RTN VOUT TOP VIEW LINE NEUTRAL SIDE VIEW 3D-VIEW Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 9 GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Connector Information Connector Connector on Power Supply Mating Connector AC Input Connector (HDR1) 5-1376382 from TE or equivalent 1376388-1 from Tyco or equivalent DC Output Connector (HDR2) 39-28-1043 from Molex or equivalent 39-01-2040 from Molex or equivalent Pinout Information AC Input Connector (HDR1) DC Output Connector (HDR2) Pin 1 Line Pin 1 VO Pin 2 Neutral Pin 2 VO Pin 3 RTN Pin 4 RTN Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All rights reserved. Page 10 GE Eneregy CLP0112 SERIES Data Sheet GE 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.24”” CLP0112 Open Frame Power Supply 90 - 265Vac input; 12Vdc output; 150W Output Power Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table 2. Device Codes Input Device Code Output Voltage Output Current Temperature Range Comcode Voltage Range CLP0112FPXXXZ01A 90 – 265Vac 12.0Vdc 12.5A -40 to 85ºC 150039432 Contact Us For more information, call us at USA/Canada: +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: +86.021.54279977*808 Europe, Middle-East and Africa: +49.89.878067-280 www.gecriticalpower.com GE Critical Power reserves the right to make changes to the product(s) or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. or information. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-CLP0212-power-supply.html h t t p: / / pow e r. sa ge r. c om September 23, 2015 ©2012 General Electric Company. All International rights reserved. Version 1.03