Manufacturers
GENERAL DEVICES CTS-120
Description
CTS Slide Cabinet Mount
CTS-120
Part Number
CTS-120
Price
Request Quote
Manufacturer
GENERAL DEVICES
Lead Time
Request Quote
Category
Fasteners, Hardware and Fluid Transfer » Mounting Brackets
Specifications
Manufacturer
General Devices
Manufacturers Part #
CTS-120
Industry Aliases
CTS-120
Sub-Category
Mounting Brackets
Factory Pack Quantity
1
Datasheet
Extracted Text
CTS Slide A B B C D E E F TO ORDER, SPECIFY Catalog Load (min) (max) (min) (max) Number Capacity - CTS-110 10.00 9.44 11.19 9.00 8.25 0.00 1.75 3 175 LBS. CTS - CTS-112 12.00 10.81 14.56 11.00 8.25 0.00 3.75 3 175 LBS. CTS-114 14.00 14.88 16.75 13.00 12.13 0.00 1.88 4 175 LBS. Stationary Section AR - Automatic Length CTS-116 16.00 15.75 19.63 15.00 12.13 0.00 3.88 4 175 LBS. 1 - Cabinet Mount Release if desired 2 - Strap Mount CTS-118 18.00 21.63 23.63 17.00 16.00 0.00 2.00 5 175 LBS. 4 - Closed Slot CTS-120 20.00 23.63 27.63 19.00 16.00 0.00 4.00 5 175 LBS. For information on mounting slides to Off-Set mounting rail see page 26. CTS-122 22.00 26.25 31.63 21.00 16.00 0.63 6.00 5 175 LBS. For information on Strap Mount option see page 27. CTS-124 24.00 28.25 34.63 23.00 16.00 1.63 8.00 5 175 LBS. Notes 1. Right hand shown, left hand opposite. TM 2. Finish: All standard slides are coated with Poxylube dry film lubricant. 3. All standard slides are designed to lock-out in the extended position and are available with an optional automatic release if lock-out is not desirable. 4. Standard hardware packages include all the hardware ® necessary to mount your Chassis Trak slides: • Rear mounting bracket (B-131) included • Bar Nuts (CA8056-06-0020) • #10-32 screws and keps nuts 5. All sliding members of the standard slide are made from cold rolled steel. ® 6. All Chassis Trak solid bearing slides are supplied with a quick disconnect feature. 7. Optional mounting patterns, slide lengths and extensions are available. 8. Pickup tab available for units without a front panel. 9. For optional mounting brackets see page 35. 19 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered CTS and CTRS Special Application Slide for Off-Set Leg Mounting Rail Catalog A B B C D E E F Load TO ORDER, SPECIFY Number (min) (max) (min) (max) Capacity CTS-SA-114 14.00 13.50 14.25 13.00 12.13 0.0 .75 4 175 LBS. - CTS-SA - CTS-SA-116 16.00 14.06 16.81 15.00 12.13 0.0 2.75 4 175 LBS. CTS-SA-118 18.00 18.81 19.69 17.00 16.00 0.0 .88 5 175 LBS. Stationary Section CTS-SA-120 20.00 20.81 23.69 19.00 16.00 0.0 2.88 5 175 LBS. AR - Automatic Length 1 - Cabinet Mount CTS-SA-122 22.00 23.31 27.69 21.00 16.00 .50 4.88 5 175 LBS. Release if desired 4 - Closed Slot CTS-SA-124 24.00 25.31 30.69 23.00 16.00 1.50 6.88 5 175 LBS. Catalog A B B C D E E F Load TO ORDER, SPECIFY Number (min) (max) (min) (max) Capacity CTRS-SA-114 14.00 13.50 14.25 13.00 12.13 0.0 .75 4 175 LBS. - CTRS-SA - CTRS-SA-116 16.00 14.06 16.81 15.00 12.13 0.0 2.75 4 175 LBS. CTRS-SA-118 18.00 18.81 19.69 17.00 16.00 0.0 .88 5 175 LBS. Stationary Section CTRS-SA-120 20.00 20.81 23.69 19.00 16.00 0.0 2.88 5 175 LBS. AR - Automatic Length 1 - Cabinet Mount Release if desired CTRS-SA-122 22.00 23.31 27.69 21.00 16.00 .50 4.88 5 175 LBS. 4 - Closed Slot CTRS-SA-124 24.00 25.31 30.69 23.00 16.00 1.50 6.88 5 175 LBS. 26 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered Strap Mounting Option C-230 Strap Mount A B 12.00 10.50 14.00 12.50 16.00 14.50 18.00 16.50 Notes 20.00 18.50 1. To order, specify C-230 - S - 2 XX see pages 14-15 for more information. 22.00 20.50 2. Strap mount slides are not designed to accommodate the standard EIA hole pattern. 24.00 22.50 3. All slides requires a .31” clearance behind the spring and button assembly for proper operation. C-300 Strap Mount A B 10.00 8.50 12.00 10.50 14.00 12.50 16.00 14.50 18.00 16.50 20.00 18.50 22.00 20.50 24.00 22.50 Notes 26.00 24.50 1. To order, specify C-300 - S - 2 XX see pages 16-17 for more information. 28.00 26.50 2. Strap mount slides are not designed to accommodate the standard EIA hole pattern. 30.00 28.50 3. All slides requires a .31” clearance behind the spring and button assembly for proper operation. CTS Strap Mount A B 12.00 10.50 14.00 12.50 16.00 14.50 18.00 16.50 20.00 18.50 22.00 20.50 Notes 24.00 22.50 1. To order, specify CTS - 2 XX see pages 18-19 for more information. 2. Strap mount slides are not designed to accommodate the standard EIA hole pattern. 3. All slides requires a .31” clearance behind the spring and button assembly for proper operation. 27 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered Optional Mounting Brackets Matrix For Solid Bearing Slides & Appropriate Rear Mounting Brackets with Range of Extension B-307-1 B-307-2 B-131* B-131-2 B-131-2.5 B-131-3 B-131-3.5 B-131-4 B-814-1 B-814-2 B-810-1 B-810-2 C-230-D 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 C-230-S 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 CTD 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 CTS 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 CTRD 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 CTRS 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 CTHD 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 CTHS 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 CTHRD 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 CTHRS 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 0 to 4.00 0 to 8.00 C-857 0 to .50 .44 to 1.06 .94 to 1.56 1.44 to 2.06 1.94 to 2.56 2.44 to 3.06 Note brackets are made from 16 gauge C.R.S. — Standard finish: clear zinc commercial plating *Supplied with standard slides CATALOG NUMBER A 1.56 B-131 2.00 B-131-2 B-131-2.5 2.50 B-131-3 3.00 3.50 B-131-3.5 4.00 B-131-4 B-810 B-307 CATALOG NUMBER A B C B-307-1 / B-810-1 / B-814-1 5.94 4.38 16 B-814 B-307-2 / B-810-2 / B-814-2 9.69 8.13 28 35 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the CTS-120?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Optional Mounting Bracket, 16 Gauge C.R.S., Clear Zinc Plating B-161-1.5
Optional Mounting Bracket, 16 Gauge C.R.S., Clear Zinc Plating B-161-4
Optional Mounting Bracket, 16 Gauge C.R.S., Clear Zinc Plating B-308
Optional Mounting Bracket, 16 Gauge C.R.S., Clear Zinc Plating B-309
Optional Mounting Bracket, 16 Gauge C.R.S., Clear Zinc Plating B-793
Non-Pivoting Slide C-230-S-122
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods