Cable Ties and Fixings 1.6 Cable Ties With Fixing Elements 2-Piece Fixing Ties for Edges, 3.0 - 6.0 mm, Top Fixing EdgeClip-Family These cable ties and EdgeClip assemblies are ideal for use where holes are not acceptable or where due to temperature problems adhesives will fail. These assemblies are widely used for fixing and bundling cables, pipes and hoses within the automotive industry, harness making, panel buidling and electrical industry. Features and Benefits • Pre-assembled 2-piece fixing tie with EdgeClip • Cable tie head can be moved after bundling • For minimum bundle diameters of 1 mm Pre-assembled 2-piece fixing tie with EdgeClip. • For edges of 3 – 6 mm Width Length Bundle Material Material TYPE Drawing (W) (L) Ø max. Cable Tie Foot Part Colour Tools Article-No. T18ROSEC19 2.5 100.0 20.0 80 PA66HS PA66HIRHS Black (BK) 2;4-6 156-04600 T50SOSEC19 4.6 150.0 35.0 225 PA66HS PA66HIRHS Black (BK) 2-10 156-04601 T50ROSEC19 4.6 200.0 45.0 225 PA66HS PA66HIRHS Black (BK) 2-10 156-04602 T50SOSEC20 4.6 150.0 35.0 225 PA66HS PA66HIRHS Black (BK) 2-10 156-00016 T50ROSEC20 4.6 200.0 45.0 225 PA66HS PA66HIRHS Black (BK) 2-10 156-00020 All dimensions in mm. Subject to technical changes. 2-Piece Fixing Ties for Edges, 3.0 - 6.0 mm, Side Fixing Width Length Bundle Material Material TYPE Drawing (W) (L) Ø max. Cable Tie Foot Part Colour Tools Article-No. T50ROSEC23 4.6 200.0 45.0 225 PA66HS PA66HIRHS Black (BK) 2-10 156-00006 T50ROSEC24 4.6 200.0 45.0 225 PA66HS PA66HIRHS Black (BK) 2-10 156-00007 All dimensions in mm. Subject to technical changes. Recommended Tools 2 3 4 5 6 7 8 9 10 MK20 MK21 MK3SP MK3PNSP2 EVO7 MK7HT MK7P MK6 MK9 For more information on toolings please refer to the Application Tooling chapter. Other combinations between cable tie and foot part available on request. 122 Further information at www.HellermannTyton.co.uk/fixings Date of issue: April 2016 Cable Ties and Fixings 1.0 Material Information Material Specifi cation Overview Material Operating Material Material MATERIAL Shortcut Temperature Colour** Flammability Properties* Specifi cations Natural • Corrosion resistant Aluminium-alloy AL -40 °C to +180 °C • Antimagnetic (NA) • Weather-resistant Chloroprene CR -20 °C to +80 °C Black (BK) • High yield strength • Resistance to radioactivity Ethylene • UV-resistant, not moisture sensitive E/TFE -80 °C to +170 °C Blue (BU) UL94 V0 • Good chemical resistance to: Tetrafl uoroethylene acids, bases, oxidizing agents • Limited brittleness sensitivity -40 °C to +90 °C, Natural • Flexible at low temperature Polyacetal POM UL94 HB • Not moisture sensitive (+110 °C, 500 h) (NA) • Robust on impacts • Bio-plastic, derived from vegetable oil • Strong impact resistance at low -40 °C to +85 °C, temperature Polyamide 11 PA11 Black (BK) UL94 HB • Very low moisture absorption (+105 °C, 500 h) • Weather-resistant • Good chemical resistance • Good chemical resistance to: -40 °C to +85 °C, Polyamide 12 PA12 Black (BK) UL94 HB acids, bases, oxidizing agents (+105 °C, 500 h) • UV-resistant -40 °C to +150 °C Natural • Resistance to high temperatures Polyamide 4.6 PA46 (5000 h), +195 °C (NA), UL94 V2 • Very moisture sensitive • Low smoke sensitive (500 h) Grey (GY) Polyamide 6 PA6 -40 °C to +80 °C Black (BK) UL94 V2 • High yield strength Polyamide 6, • Limited brittleness sensitivity PA6HIR -40 °C to +80 °C Black (BK) UL94 HB • Higher fl exibility at low temperature high impact modifi ed Black (BK), -40 °C to +85 °C, Polyamide 6.6 PA66 Natural UL94 V2 • High yield strength (+105 °C, 500 h) (NA) Polyamide 6.6, PA66GF13, • Good resistance to: lubricants, vehicle -40 °C to +105 °C Black (BK) UL94 HB fuel, salt water and many solvents glass-fi bre reinforced PA66GF15 • High yield strength Polyamide 6.6, PA66HSW -40 °C to +105 °C Black (BK) UL94 V2 • Modifi ed elevated max. temperature heat and UV stabilised • UV-resistant Black (BK), • High yield strength Polyamide 6.6, PA66HS -40 °C to +105 °C Natural UL94 V2 • Modifi ed elevated heat stabilised max. temperature (NA) • Limited brittleness sensitivity Polyamide 6.6, -40 °C to +80 °C, PA66HIR Black (BK) UL94 HB • Higher fl exibility at low high impact modifi ed (+105 °C, 500 h) temperature • Limited brittleness sensitivity Polyamide 6.6, • Higher fl exibility at low temperature high impact modifi ed, heat PA66HIRHSW -40 °C to +110 °C Black (BK) UL94 HB • Modifi ed elevated max. temperature and UV stabilised • High yield strength, UV-resistant Polyamide 6.6, • Limited brittleness sensitivity high impact modifi ed, heat PA66HIRHS -40 °C to +105 °C Black (BK) UL94 HB • Higher fl exibility at low temperature • Modifi ed elevated max. temperature stabilised Polyamide 6.6, -40 °C to +80 °C, • Limited brittleness sensitivity high impact modifi ed, scan PA66HIR(S) Black (BK) UL94 HB • Higher fl exibility at low temperature (+105 °C, 500 h) black Polyamide 6.6, -40 °C to +85 °C, • High yield strength PA66W Black (BK) UL94 V2 • UV-resistant UV-resistant (+105 °C, 500 h) ® ® Tefzel is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel -Tie. **More colours on request. ® In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should not be regarded as a material specifi cation and are no substitute for a suitability test. Please see our datasheets for further details. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances 24 Further information at www.HellermannTyton.co.uk/fi xings Date of issue: April 2016 Cable Ties and Fixings 1.0 Material Information Material Operating Material Material MATERIAL Shortcut Temperature Colour** Flammability Properties* Specifi cations Polyamide 6.6, -40 °C to +85 °C, • High yield strength PA66MP Blue (BU) UL94 HB • Metal and X-Ray detectable with metal particles (+105 °C, 500 h) • High yield strength Polyamide 6.6 V0 PA66V0 -40 °C to +85 °C White (WH) UL94 V0 • Low smoke emission Polyamide 6.6 V0, -40 °C to +85 °C, • High yield strength PA66V0-HOI White (WH) UL94 V0 • Low smoke emissions High Oxygen Index (+105 °C, 500 h) • UV-resistant Polyester SP -50 °C to +150 °C Black (BK) Halogen free • Good chemical resistance to: most acids, alkalis and oils • Resistance to radioactivity • Not moisture sensitive Polyetheretherketone PEEK -55 °C to +240 °C Beige (BGE) UL94 V0 • Good chemical resistance to: acids, bases, oxidizing agents • Low moisture absorption Black (BK), Polyethylene PE -40 °C to +50 °C UL94 HB • Good chemical resistance to: most Grey (GY) acids, alcohol and oils Polyolefi n PO -40 °C to +90 °C Black (BK) UL94 V0 • Low smoke emissions • Floats in water Black (BK), • Moderate yield strength Polypropylene PP -40 °C to +115 °C Natural UL94 HB • Good chemical resistance to: (NA) organic acids Polypropylene, Ethylene- • Good resistance to high temperatures Propylene-Dien- PP, EPDM -20 °C to +95 °C Black (BK) UL94 HB • Good chemical and abrasion Terpolymere-rubber resistance free of Nitrosamine • Floats in certain liquids • Metal and X-Ray detectable Polypropylene PPMP -40 °C to +115 °C Blue (BU) UL94 HB • Heat resistant with metal particles • Moderate yield strength • Good chemical resistance Black (BK), • Low moisture absorption Polyvinylchloride PVC -10 °C to +70 °C Natural UL94 V0 • Good chemical resistance to: acids, ethanol and oil (NA) • Corrosion resistant Stainless Steel, SS304, Natural • Antimagnetic -80 °C to +538 °C Non burning • Weather resistant Stainless Steel SS316 (NA) • Outstanding chemical resistance • High elasticity Thermoplastic TPU -40 °C to +85 °C Black (BK) UL94 HB • Good chemical resistance to: Polyurethane acids, bases and oxidizing agents ® ® Tefzel is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel -Tie. **More colours on request. ® In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should not be regarded as a material specifi cation and are no substitute for a suitability test. Please see our datasheets for further details. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances Further information at www.HellermannTyton.co.uk/fi xings 25 Date of issue: April 2016