Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices L6 (Oversize) Series — Miniature Switches and Pilot Devices Key features: • 5/8” (16mm) mounting holes • Locking lever removable contact blocks • Solder terminal or PCB terminal options • Available assembled or as sub-components • Worldwide approvals • Incandescent or LED illumination • Snap action contacts UL Recognized CSA Certified File No. E55996 File No. LR21451 Registration No. R9551089 (E-stops) Registration No. J9551458 (all other switches) Registration No. R95650511 (Pilot Lights) Conforming to Standards EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 N0.14 Operation: –25 to +55°C (without freezing), 45 to 85% RH Operating Temperature Storage: -30 to +80°C (without freezing) Vibration Resistance 5 to 55Hz, 1.0 peak-peak amplitude max 2 Operating limit: 100 m/sec (approximately 10G) Shock Resistance 2 Damage limit: 1000 m/sec (approximately 100G) Momentary pushbuttons 2,000,000 operations minimum Mechanical Life All others: 250,000 operations minimum Degree of Protection IP65 (conforming to IEC 60529) Switch unit: between live and ground: 2500 volt AC, 1 minute between terminals of different poles: 2500 volt AC, 1 minute Dielectric Strength between terminals of same pole: 1000 volt AC, 1 minute Illumination unit: between live part and ground: 2500 volt AC, 1 minute Insulation Resistance 100MΩ minimum (using 500V DC megger) Rated Insulation Voltage 250V AC/DC Gold Contacts (pcb): 3A Rated Thermal Current Silver Contacts (solder): 5A Contact Resistance 50Ω maximum initial value Silver Contacts Gold Clad Contacts (Solder Terminals) (PCB terminals) 30V 125V 250V 30V 125V Rated Operating Current AC resistive — 5A 2A AC inductive - 0.1A AC inductive — 2A 1.5A DC resistive 0.1A — DC resistive 3A 0.4A — DC inductive 1A 0.2A — Minimum Recommended Load (reference value for silver 5V AC/DC, 1mA contacts) Terminal Style 0.110” Solder Tab /PCB Contact Form Snap Action, Double Throw Contact Material Solder Tab: Pure Silver /PCB: Gold Plated Silver Momentary pushbuttons: 100,000 operations minimum (1800 operations / hour) Electrical Life (at full load) All others: 100,000 operations minimum (1200 operations / hour) 5V DC LED: 8mA 6V AC/DC LED: 7mA 6V AC/DC incandescent: 100 mA Lamp Current Draw 12V AC/DC LED: 8mA 12V AC/DC incandescent: 50 mA 24V AC/DC LED: 8mA 24V AC/DC incandescent: 25 mA 120V AC = 8mA Lamp Life Incandescent: 2000 hours./LED 50,000 hours. (on pure DC, half-life intensity) 1705151131 800-262-IDEC (4332) • USA & Canada 555 Lamp Ratings Contact Ratings ø16mm - L6 Series Switches & Pilot Devices Built-in LED Lamp Ratings Model LFTD-5k LFTD-1k LFTD-2k LFTD-H2k Lamp Base SX6S/8x5.4 Rated Voltage 5V DC 12V AC/DC 24V AC/DC 120V AC Operating Voltage 5V DC ±5% 12V AC/DC ±10% 24V AC/DC ±10% 120V AC ±5% AC — 9mA 9mA 8mA Current Draw DC 8mA 8mA 8mA — Color Code k Specify a color code in place of k in the Part No: A (amber), G (green), R (red), S (blue), W (white), Y (yellow) Lamp Base Color Same as illumination color Voltage Marking Stamped on the lamp base Life (reference value) Approx. 50,000 hours A, R, W, Y A, R, W, Y X1 X2 (+) (–) (+) (–) X1 Internal Circuit G, S G, S X1 X1 X2 X2 Non-Illuminated Pushbuttons (Assembled) Non-Illuminated Pushbuttons X2 Terminal Style Style Operation Contact Solder Tab PCB Oversize Round SPDT HA1B-M2C5-j HA1B-M2C1V-j Momentary Extended DPDT HA1B-M2C6-j HA1B-M2C2V-j SPDT HA1B-A2C5-j HA1B-A2C1V-j Maintained DPDT HA1B-A2C6-j HA1B-A2C2V-j SPDT HA2B-M1C5-j HA2B-M1C1V-j Oversize Square Flush Momentary DPDT HA2B-M1C6-j HA2B-M1C2V-j SPDT HA2B-A1C5-j HA2B-A1C1V-j Maintained DPDT HA2B-A1C6-j HA2B-A1C2V-j Oversize Square SPDT HA2B-M2C5-j HA2B-M2C1V-j Momentary Extended DPDT HA2B-M2C6-j HA2B-M2C2V-j SPDT HA2B-A2C5-j HA2B-A2C1V-j Maintained DPDT HA2B-A2C6-j HA2B-A2C2V-j SPDT HA1B-M3C5-j HA1B-M3C1V-j jButton Color Codes Mushroom Momentary Color Code Color Code DPDT HA1B-M3C6-j HA1B-M3C2V-j Black B Blue S SPDT HA1B-A3C5-j HA1B-A3C1V-j Green G White W Maintained DPDT HA1B-A3C6-j HA1B-A3C2V-j Red R Yellow Y 1. In place of j specify Button Color Code from table. 2. Illuminated (translucent) style lenses also available, specify as such: instead of LA1B-M1C5-j use LA1B-M1C5L-k in place of k (specify Lens Color Code from next page.) 3. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” respectively, ie LA1B-M1C1V-j becomes LA1B-M1C5V-j). 1705151131 www.IDEC.com 556 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Non-Illuminated Pushbuttons (Sub-Assembled) Contact + Safety Lever Lock + Operator + Button = Complete Part Operators Buttons/Lenses Contacts Style Momentary Maintained Style Button Lens Terminal Style Style Contacts Oversize Round Oversize Round Solder PCB Flush Tab HA1B-MO HA1B-AO HA1A-B1-j HA1A-L1-k* SPDT HA-C1 HA-C1V DPDT HA-C2 HA-C2V Oversize Square Oversize Round Extended SPDT HA-C5 HA-C5V HA2B-MO HA2B-AO DPDT HA-C6 HA-C6V HA1A-B2-j – Safety Lever Lock Mushroom Style Part Number Oversize Square HA1B-MOL HA1B-A0L Flush HA9Z-LS HA2A-B1-j HA2A-L1-k** 1. In place of j specify Button Color Code from table j Button Color Code on right. 2. In place of k specify Lens Color Code from table Color Code Oversize Square on right. Extended 3. *requires HA1L-M0 or HA1L-A0 operator instead Black B of HA1B-M0 or HA1B-A0. Green G 4. **requires HA2L-M0 or HA2L-A0 instead of HA2A-B2-j – HA2B-M0 or HA2B-A0. Red R Blue S White W Mushroom Yellow Y HA1A-B3-j HA1A-L3-k k Lens Color Code Color Code Amber A Green G Red R Blue S Yellow Y White W 1705151131 800-262-IDEC (4332) • USA & Canada 557 Silver Gold ø16mm - L6 Series Switches & Pilot Devices HA1B/HA1E Stop Switch Key features: • PCB or Solder Terminals • Locking Lever Removable Contact Blocks • Positive Action Contacts • 1 or 2 form B (SPST-NC) Contacts • IP65 Protection • 16mm Mounting Hole • Tamper Proof Construction Direct CSA UL Recognized File No. DK95-00138 Opening File No. LR21451 File No. E55996 Action Specifications Nameplates Contact Form 1 or 2 form B (SPST-NC) HAAV–Yellow Plastic Termination PCB or Solder Terminal Contact Material Silver Applicable Standards EN60947-5-1, UL508, CSA 22.2. No. 14 Rated Insulation Voltage 250V AC/DC Degree of Protection IP65 Conditional Short-Circuit Current and 50 A (at 250V) 10A 250V Fuse, operation Short-Circuit Protective Device class M according to IEC269-1 and IEC269-2 Positive opening travel 3.4mm Marking Part Number Minimum force required to achieve positive Blank HAAV-0 10.3 N (2 form B contacts) Positive opening operation of all break contacts. Opening Maximum travel including travel beyond the Operation 5.5mm minimum travel position Maximum frequency of actuation 1,200 operations/hour Pollution Degree 3 Positive Action Stop Switch Accessories: Shroud Terminal Style Style Part Number Applicable Standards Style Operation Contact Solder Tab PCB HA1B- DPST(NC) (2 form B) HA1B-V2E2R SEMI S2 Compliant V2E2VR XA9Z-KG1 Stop Pushlock/ (Approved by TUV) Switch Turn Reset SPST-NC (1 form B) HA1E-V2S1R Short Body — DPST-NC (2 form B) HA1E-V2S2R 1. Button is non-removable, available in red and as complete assembled unit only. 2. Stop Switch does not come with safety lever lock. Buzzers (IP40) Buzzer Ratings Terminal Style Frequency 2 khz ± 500 HZ Style Operating Voltage Solder/ Amplitude 80db @ 0.1m (at rated voltage) PCB Tab Operating Voltage 6V AC/DC or 12 - 24V AC/DC ± 10% Adjustable Cycle 55 to 600 cycles per minute 6V AC/DC ± 10% LA3Z-1X2 LA3Z-1X2V DC: 7mA Current Draw AC: 20mA Life 1000 hrs. minimum 12V to 24 AC/DC ± 10% LA3Z-1X4 LA3Z-1X4V Insulation Voltage 60V AC/DC -20 to 55ºC (no freezing), 45 to 85% Operating Temperature RH Degree of Protection IP40 1705151131 www.IDEC.com 558 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Buzzer-Rectangular ø43mm Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Pilot Lights (Assembled) Pilot Lights kLens/LED Color Codes Terminal Style Color Code Style Solder Tab PCB Amber A Oversize Round Green G Red R Blue S HA1P-1C0l-k HA1P-1C0lV-k White W Yellow Y Oversize Square lVoltage/Lamp Code Voltage Code 5V DC LED 1 HA2P-1C0l-k HA2P-1C0lV-k 6V AC/DC LED 2 12V AC/DC LED 3 24V AC/DC LED 4 Oversize Round Unibody 120V AC LED 8 6V AC/DC Incandescent 5 12V AC/DC Incandescent 6 HA1P-1l-k — 24V AC/DC Incandescent 7 Oversize Square Unibody HA2P-1l-k — 1. In place of k specify Lens/LED Color Code from table. 2. In place of l specify Voltage Code from table. 1705151131 800-262-IDEC (4332) • USA & Canada 559 ø16mm - L6 Series Switches & Pilot Devices Pilot Lights (Sub-Assembled) Terminals + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens = Completed Unit Operators Lenses Terminals Style Part Number Style Solder Tab PCB Style Part Number Oversize Round Oversize Round HA-C00 HA-C00V HA1A-P1-k HA1P-0 Not required for unibody operators. Oversize Square Oversize Square HA2A-P1-k Lamp Holder HA2P-0 Style Part Number HA9Z-AH In place of k specify lens color code. Oversize Round Unibody HA1P-00 Safety Lever Lock Lamps Style Part Number Style Voltage Part Number LED 5V DC LFTD-5k HA9Z-LS Oversize Square Unibody 6V AC/DC LFTD-6k 12V AC/DC LFTD-1k 24V AC/DC LFTD-2k 120 V AC LFTD-H2k HA2P-00 k Lens/LED Color Codes Incandescent Color Code 6V AC/DC LH-06 Amber A 12V AC/DC LH-14 24V AC/DC LH-28 Green G Red R Blue S In place of k specify LED color code from table below. Yellow Y White W 1705151131 www.IDEC.com 560 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Illuminated Pushbuttons (Assembled) Illuminated Pushbuttons kLens Color Codes Terminal Style Color Code Style Operation Contact Solder Tab PCB Amber A Green G Oversize Round SPDT HA1L-M1C5l-k HA1L-M1C1lV-k Momentary Red R DPDT HA1L-M1C6l-k HA1L-M1C2lV-k Blue S Yellow Y SPDT HA1L-A1C5l-k HA1L-A1C1lV-k Maintained White W DPDT HA1L-A1C6l-k HA1L-A1C2lV-k Oversize Square lVoltage/Lamp Code SPDT HA2L-M1C5l-k HA2L-M1C1lV-k Momentary DPDT HA2L-M1C6l-k HA2L-M1C2lV-k Voltage Code 5V DC LED 1 6V AC/DC LED 2 SPDT HA2L-A1C5l-k HA2L-A1C1lV-k Maintained DPDT HA2L-A1C6l-k HA2L-A1C2lV-k 12V AC/DC LED 3 24V AC/DC LED 4 Mushroom SPDT HA1L-M3C5l-k HA1L-M3C1lV-k 120 V AC LED 8 Momentary DPDT HA1L-M3C6l-k HA1L-M3C2lV-k 6V AC/DC Incandescent 5 12V AC/DC Incandescent 6 SPDT HA1L-A3C5l-k HA1L-A3C1lV-k 24V AC/DC Incandescent 7 Maintained DPDT HA1L-A3C6l-k HA1L-A3C2lV-k 1. In place of k specify Lens Color Code from table. 2. In place of l specify Voltage Code from table. 3. PCB terminal models also available with silver contacts change “1” or “2” to “5” or “6” respectively, (ie LA1L- M1C14V-j becomes LA1L-M1C54V-j). 4. Light independent of switch position. 1705151131 800-262-IDEC (4332) • USA & Canada 561 ø16mm - L6 Series Switches & Pilot Devices Illuminated Pushbuttons (Sub-Assembled) Terminals + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens = Completed Unit Operators Lenses Lamps Style Momentary Maintained Style Part Number Style Voltage Part Number Oversize Round LED Oversize Round 5V DC LFTD-5k 6V AC/DC LFTD-6k 12V AC/DC LFTD-1k HA1L-MO HA1L-A0 HA1A-L1-k 24V AC/DC LFTD-2k 120 V AC LFTD-H2k Incandescent 6V AC/DC LH-06 Oversize Square Oversize Square 12V AC/DC LH-14 24V AC/DC LH-28 HA2L-MO HA2L-AO HA2A-L1-k Contacts Terminal Style Mushroom Mushroom Style Contacts Solder PCB Tab HA1B-MOL HA1B-AOL HA1A-L3-k SPDT HA-C10 HA-C10V DPDT HA-C20 HA-C20V k Lens/LED Color Codes SPDT HA-C50 HA-C50V In place of k specify lens color code. DPDT HA-C60 HA-C60V Color Code Amber A Green G Lamp Holder Red R Style Part Number Blue S Yellow Y HA9Z-AH White W Safety Lever Lock Style Part Number HA9Z-LS 1705151131 www.IDEC.com 562 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Silver Gold Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Selector Switches (Assembled) Selector Switches Contact Operations (for all selectors) Terminal Style Style Position Contact Operator Position and Solder Tab PCB Contacts Contact Operation L R Left Right Maintained DPDT HA1S-2C6 HA1S-2C2V Contact Contact NO NC NO NC Left Spring return L R DPDT HA1S-21C6 HA1S-21C2V Oversize Round from right C C 2-pos. Left Right C (DPDT) Contact Contact L NO NC NO NC R Maintained DPDT HA1S-3C6 HA1S-3C2V Right C Spring return C C L R DPDT HA1S-31C6 HA1S-31C2V Left Right from right Contact Contact NO NC NO NC C Spring return L Left R DPDT HA1S-32C6 HA1S-32C2V from left C C C 2-Way spring Left Right L R DPDT HA1S-33C6 HA1S-33C2V Contact Contact return NO NC NO NC 3-pos. Center (DPDT) 1. All assembled selector switches use DPDT contacts. 2. For SPDT contacts see sub-components on next page. C C 3. PCB terminal models also available with silver contacts change “1” or “2” to “5” or “6” respectively, (ie LA1S-21C2V Left Right Contact Contact becomes LA1S-21C6V). NO NC NO NC Right C C As viewed from front of switch. 1705151131 800-262-IDEC (4332) • USA & Canada 563 45˚ 3-Position 90˚ 2 -Position ø16mm - L6 Series Switches & Pilot Devices Selector Switches (Sub-Assembled) Contact + Safety Lever Lock + Operator = Complete Part Operators Contacts Style Position Function Part Number Terminal Style Style Contacts Oversize Round Maintained HA1S-2Y Solder 2 PCB Spring from right HA1S-21Y Tab Maintained HA1S-3Y SPDT HA-C1 HA-C1V Spring from right HA1S-31Y 3 DPDT HA-C2 HA-C2V Spring from left HA1S-32Y Spring from both HA1S-33Y Safety Lever Lock SPDT HA-C5 HA-C5V DPDT HA-C6 HA-C6V Style Part Number HA9Z-LS 1. All assembled switches listed on previous page use DPDT contacts. 2. SPDT Contacts for use on 2 position selector switch only 1705151131 www.IDEC.com 564 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Silver Gold Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Key Switches (Assembled) Key Switches Terminal Style Style Position Contact Solder Tab PCB L R Maintained DPDT HA1K-2C6l HA1K-2C2Vl C Spring return L Oversize Round R DPDT HA1K-21C6B HA1K-21C2VB from right C L Maintained R DPDT HA1K-3C6l HA1K-3C2Vl C Spring return L R DPDT HA1K-31C6l HA1K-31C2Vl from right C Spring return L R DPDT HA1K-32C6l HA1K-32C2Vl from left C 2-Way spring L R DPDT HA1K-33C6D HA1K-33C2VD return 1. In place of l specify Key Retention Code from next page. 2. All assembled key switches have DPDT contacts. For SPDT see sub-assembled on next page. 3. PCB terminal models also available with silver contacts change “1” or “2” to “5” or “6” respectively, (ie LA1K-2C2Vl becomes LA1K-2C6Vl). Contact Operations l Key Retention Option Codes (for all selectors) Code Description Operator Position and Contacts Key not retained in any position Contact Operation A (removable in all positions) Left Right Contact Contact B Key retained in right position only NO NC NO NC Left C Key retained in left position only C C Key retained in left and right 2-pos. D (3 position only) (DPDT) Left Right Contact Contact NO NC NO NC Key retained in center only E Right (3 position only) C C Key retained right and center G (3 position only) Left Right Contact Contact NO NC NO NC Key retained left and center H Left (3 position only) C C Key cannot be removed from a spring-return position. Left Right Contact Contact NO NC NO NC 3-pos. Center (DPDT) C C Left Right Contact Contact NO NC NO NC Right C C As viewed from front of switch. 1705151131 800-262-IDEC (4332) • USA & Canada 565 45˚ 3-Position 90˚ 2 -Position ø16mm - L6 Series Switches & Pilot Devices Selector Switches (Sub-Assembled) Contact + Safety Lever Lock + Operator = Complete Part Operators Contacts Style Position Function Part Number Terminal Style Style Contacts Oversize Round Solder Maintained HA1K-2l 2 PCB Spring from right HA1K-21B Tab SPDT HA-C1 HA-C1V DPDT HA-C2 HA-C2V Maintained HA1K-3l Spring from right HA1K-31l 3 Spring from left HA1K-32l SPDT HA-C5 HA-C5V Spring from both HA1K-33D DPDT HA-C6 HA-C6V 1. All assembled switches listed on previous page use DPDT contacts. 1. In place of l specify key removable code from table on right. 2. SPDT Contacts for use on 2 position selector 2. Operator includes two keys. switch only Safety Lever Lock Style Part Number HA9Z-LS l Key Retention Option Codes Code Description Key not retained in any position A (removable in all positions) B Key retained in right position only C Key retained in left position only Key retained in left and right D (3 position only) Key retained in center only E (3 position only) Key retained right and center G (3 position only) Key retained left and center H (3 position only) Key cannot be removed from a spring-return position. 1705151131 www.IDEC.com 566 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Silver Gold Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Illuminated Selector Switches (Assembled) Illuminated Selector Switches Contact Operations (for all selectors) Terminal Style Style Position Contact Operator Position and Solder Tab PCB Contacts Contact Operation L R Maintained DPDT LA1F-2C6l-k LA1F-2C2lV-k Left Right Contact Contact NO NC NO NC Left Spring return L R DPDT LA1F-21C6l-k LA1F-21C2lV-k Round from right C C 2-pos. C (DPDT) L Left Right R Maintained DPDT LA1F-3C6l-k LA1F-3C2lV-k Contact Contact NO NC NO NC Right C Spring return L R DPDT LA1F-31C6l-k LA1F-31C2lV-k from right C C C Left Right Spring return L Contact Contact R DPDT LA1F-32C6l-k LA1F-32C2lV-k NO NC NO NC from left Left C 2-Way L R DPDT LA1F-33C6l-k LA1F-33C2lV-k spring return C C Left Right Contact Contact L R Maintained DPDT LA2F-2C6l-k LA2F-2C2lV-k NO NC NO NC 3-pos. Center (DPDT) C Spring return L C C R DPDT LA2F-21C6l-k LA2F-21C2lV-k Square from right Left Right C Contact Contact L NO NC NO NC Maintained R DPDT LA2F-3C6l-k LA2F-3C2lV-k Right C Spring return C C L DPDT LA2F-31C6l-k LA2F-31C2lV-k R from right As viewed from front of switch. C Spring return L R DPDT LA2F-32C6l-k LA2F-32C2lV-k from left C 2-Way k Lens/LED Color Codes L R DPDT LA2F-33C6l-k LA2F-33C2lV-k spring return Color Code Color Code L R Maintained DPDT LA3F-2C6l-k LA3F-2C2lV-k Amber A Blue S Green G Yellow Y C Spring return L R DPDT LA3F-21C6l-k LA3F-21C2lV-k Red R White W Rectangular from right C L R Maintained DPDT LA3F-3C6l-k LA3F-3C2lV-k l Voltage/Lamp Code Voltage Code C Spring return L R DPDT LA3F-31C6l-k LA3F-31C2lV-k 5V DC LED 1 from right C 6V AC/DC LED 2 Spring return L R DPDT LA3F-32C6l-k LA3F-32C2lV-k from left 12V AC/DC LED 3 C 2-Way 24V AC/DC LED 4 L R DPDT LA3F-33C6l-k LA3F-33C2lV-k spring return 120V AC LED 8 L R 6V AC/DC Incandescent 5 Maintained DPDT HA1F-2C6l-k HA1F-2C2lV-k 12V AC/DC Incandescent 6 C Spring return L R DPDT HA1F-21C6l-k HA1F-21C2lV-k 24V AC/DC Incandescent 7 Oversize Round from right 1. In place of k specify Lens/LED Color Code C L from table above. Maintained R DPDT HA1F-3C6l-k HA1F-3C2lV-k 2. In place of l specify Voltage Code from table above. C Spring return 3. All switches listed have DPDT contacts. For L DPDT HA1F-31C6l-k HA1F-31C2lV-k R from right SPDT see sub-assembled on next page. 4. PCB terminal models also available with C Spring return L silver contacts change “1” or “2” to “5” or R DPDT HA1F-32C6l-k HA1F-32C2lV-k from left “6” respectively, (ie LA1F-2C24V-k becomes LA1F-2C64V-k). C 2-Way L 5. Light independent of switch position. R DPDT HA1F-33C6l-k HA1F-33C2lV-k spring return 1705151131 800-262-IDEC (4332) • USA & Canada 567 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position ø16mm - L6 Series Switches & Pilot Devices Illuminated Selector Switches (Sub-Assembled) Contacts + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens/Handle = Completed Unit Operators Safety Lever Lock Style Position Function Part Number Style Part Number Maintained LA1F-20 2 Spring from right LA1F-210 HA9Z-LS Maintained LA1F-30 Round Spring from right LA1F-310 3 Spring from left LA1F-320 Lamp Holder Spring from both LA1F-330 Style Part Number Maintained LA2F-20 2 Spring from right LA2F-210 Maintained LA2F-30 HA9Z-AH Square Spring from right LA2F-310 3 Spring from left LA2F-320 Spring from both LA2F-330 Lamps Maintained LA3F-20 2 Spring from right LA3F-210 Style Voltage Part Number Maintained LA3F-30 LED Rectangular 5V DC LFTD-5k Spring from right LA3F-310 3 6V AC/DC LFTD-6k Spring from left LA3F-320 12V AC/DC LFTD-1k Spring from both LA3F-330 24V AC/DC LFTD-2k Maintained HA1F-20 120V AC LFTD-H2k 2 Spring from right HA1F-210 Incandescent Oversize Maintained HA1F-30 Round 6V AC/DC LH-06 Spring from right HA1F-310 3 12V AC/DC LH-14 Spring from left HA1F-320 24V AC/DC LH-28 Spring from both HA1F-330 In place of k specify LED color code from table below. Lenses/Handles Contacts Terminal Style Style Part Number k Lens/LED Color Codes Style Contacts Solder Standard PCB Tab Color Code LA1A-F-k Amber A SPDT HA-C10 HA-C10V Green G DPDT HA-C20 HA-C20V Red R Oversize Blue S SPDT HA-C50 HA-C50V Yellow Y HA1A-F-k DPDT HA-C60 HA-C60V White W All assembled selectors on previous pages use DPDT In place of k specify lens color code from table. contacts. SPDT contacts are for use only on two position selectors. 1705151131 www.IDEC.com 568 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Silver Gold Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Pushbutton Selectors (Assembled) Pushbutton Selectors j Button Color Codes Terminal Style Color Code Color Code Style Solder Tab PCB Amber A Blue S 2 Position HA1R-2C6-j HA1R-2C2V-j Green G Yellow Y Red R White W 3 Position HA1R-3C6-j HA1R-3C2V-j 1. In place of j specify Button Color Code. 2. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” Contact Operation respectively, ie HA1R-2C2V-j becomes HA1R-2C6V-j). 3. Pushed position, momentary only. Operator Position and Contact Information Contacts Down Center Up Contact Operation Left Right Left Right Contact Contact Contact Contact NO NC NO NC NO NC NO NC 2-pos. Maintained Operator Position Style (DPDT) Spring from Top Left Center Right C C C C Normal Pushed Normal Pushed Normal Pushed Left Right Left Right Contact Contact Contact Contact Left Right NO NC NO NC NO NC NO NC Left Right Left Right Left Right 2-pos. Spring Return Contact Contact Contact Contact Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC (DPDT) from Bottom 2 Position — — C C C C Left Right Left Right Left Right C C C C C C Contact Contact C C Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC Left Right Left Right Left Right Left Right Left Right 3-pos. Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact All models NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC (DPDT) 3 Position Blocked C C C C C C As viewed from front of switch. C C C C C C C C C C Lever Switches Terminal Type Style Operation Contacts Solder Tab PCB U Maintained DPDT LA1T-2C6 LA1T-2C2V D U Spring return from top DPDT LA1T-21C6 LA1T-21C2V D U Spring return from bottom DPDT LA1T-22C6 LA1T-22C2V D U C Maintained DPDT LA1T-3C6 LA1T-3C2V D U C Spring return from top DPDT LA1T-31C6 LA1T-31C2V D U C Spring return from bottom DPDT LA1T-32C6 LA1T-32C2V D U C Spring return from both DPDT LA1T-33C6 LA1T-33C2V D 1. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” respectively, ie LA1T-2C2V becomes LA1T-2C6V). 2. Terminology: U = up, D = down, C = center. 1705151131 800-262-IDEC (4332) • USA & Canada 569 3-Position 2 -Position ø16mm - L6 Series Switches & Pilot Devices Switch Engraving Order Form – L6 Series Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved. To insure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Telephone: Name: Fax: Address: Email: PO: Part Number to be Engraved: Please check one of the boxes below to indicate your choice of engraving options: Rectangular Square Round Switch Switch Switch Letter Max. Characters Letter Max. Characters # of Letter Max. Characters # of Lines # of Lines Height Per Line Height Per Line Lines Height Per Line 1 5/32 6 1 5/32 5 5/32 3 1 5/32 6 5/32 5 1/8 3 2 2 1/8 6 1/8 6 2 Custom* 3 1/8 6 3 1/8 6 3 Custom* 4 N/A 4 N/A 4 N/A *Engraving is possible, but character size will be smaller than standard sizes. 1. Above mentioned specifications hold true for standard size pushbuttons (round, square and rectangular). 2. Oversize pushbuttons and pilot lights allow you to engrave 1 additional character. 3. Engraving is done on the button itself for non-iIlluminated push buttons and on marking plate for illuminated pushbuttons and pilot lights. 4. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. Enter text to be engraved: Sample Letter Sizes 1/8 Letters: Line 1: 5/32 Letters: Line 2: Line 3: Line 4: For IDEC Internal Use Only: Work Order #: 1705151131 www.IDEC.com 570 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Accessories Item Appearance Specifications Part Number Notes Used for tightening the plastic locking ring when installing the L6 series unit on a panel. Ring Wrench Made of metal MT-001 Tightening torque should not exceed 9kgf cm when tightening the locking ring. Lamp Holder Tool Made of rubber. Used for removing and replacing Rubber tool used for replacing LED and incandescent OR-44 (Made of Rubber) LED and incandescent lamps in illuminated units. lamps. Lens Removal Tool For Illuminated pushbuttons and pilot lights. MT-101 Used for removing the lens or button from the housing. 5V DC LFTD-5k 6V AC/DC LFTD-6k T 1-3/4 miniature flange base. In place of j specify LED LED Lamp 12V AC/DC LFTD-1k Color Code (A, G, R, S, W, Y). 24V AC/DC LFTD-2k 120V AC LFTD-H2k 6V AC/DC LH-06 Incandescent Lamp 12V AC/DC LH-14 0.5W, T 1-3/4 miniature flange base 24V AC/DC LH-28 180 degrees Prevents inadvertent switch operation. IP65 oiltight Switch Guard opening, Oversize Round/Sq HA9Z-K1 rated. spring return All removable contacts H6-VL2 Covers terminals to prevent possible electric shock. Terminal Cover Made of white nylon Unibody Pilot Lights H6-PVL Fills unused panel cutouts. Made of nitrile rubber. Push- Rubber AL-B6 in installation from front of panel. IP65 (oiltight) rated. Mounting Hole Plug Fills unused panel cutouts. Made of aluminum. Screw- Aluminum AL-BM6 on locking ring from inside of panel. IP65 (oiltight) rated. Replacement Keys for HA1K (#231) – oversize KG9Z-SK Pair of keys. Oversize Round HA9Z-P1-W Replacement Oversize Square HA9Z-P2-W Engraving Inserts Mushroom HA9Z-P13-W Replacement All models HA9Z-LN Locking Ring Replacement Prevents rotation of switches in panel. (included with all L6 oversize HA9Z-LP Anti-Rotation Ring assembled switches) Replacement Applicable to round oversize selectors only HA9Z-HC1-j Selector Inserts j = (G, R, S, W, Y) Replacement HA9Z-LS Safety Lever Lock 1705151131 800-262-IDEC (4332) • USA & Canada 571 RO.61" (15.5mm) LOCK LOCK ø16mm - L6 Series Switches & Pilot Devices Item Appearance Description Used With Part Number ø24mm round, metal (aluminum color), panel cut-out ø20.2mm LA9Z-SM61 Illuminated selector switches. ø24mm round, plastic (black), panel cut-out ø20.2mm LA9Z-S61B L6 Switch + Flush Bezel 024mm square, plastic (black), panel cut-out 020.2mm LA9Z-S71B Flush Bezel = 24 x 30mm rectangular, plastic (black), panel cut-out ø20.2 x LA9Z-S81B 26.2mm Switch Guard Flush Switch w/ Flush Bezel Rectangular, plastic (black) LA9Z-KS8 (spring return) Flush bezels not applicable for oversize units. Dimensions (mm) Lever Switches (LA1T) Buzzer (LA3Z) PC Board Terminal Tab Terminal Panel Thickness 0.8W×0.5t 2-R0.6 2.8W×0.5t 0.5 to 6 R15.5 X2 X1 10.8 24 1 2.6 2 10.5 13.5 24 17.8 5.5 9369 Emergency Stop Switch (HA1B) Rubber Washer Panel Thickness 0.02"-0.24" (0.5~6.0mm) Stopper Locking Ring PCB Terminal 0.34" + (8.7mm) NC NC - 0.21" 0.53" 0.20" (5.4mm) 0.41" (13.5mm) 0.43" ø0.70" (5.2mm) (10.5mm) (11mm) (17.8mm) 0.62" ø0.83" (15.8mm) (21mm) 0.98" (25mm) 1.42" (36mm) Emergency Stop Switch (HA1E) - Short Body Style 1705151131 www.IDEC.com 572 ø18 Ø 0.98" (24.9mm) Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices ø21 15.8 6 2.7 6 1.2 18 Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers LOCK TP O LOCK ø16mm - L6 Series Switches & Pilot Devices Illuminated Selector Switches (LA*F) Panel Thickness 0.5 to 6 Gasket Locking Ring Anti-rotation Ring 0.6 Round Square Rectangular Tab Terminal Width 2.8×0.5t PC Board Terminal R15.5 Width 0.8×0.5t 2.6 1 10.5 13.5 9 18 24 2 17.8 93617 5.5 PC Board Terminal Solder/Tab Terminal PC Board Drilling Layout (Bottom View) Illuminated Pushbuttons, Pilot Lights, Selector Switches, Panel Cut-Out Illuminated Selector Switches Key Selector Switches Pushbutton Lever Switches +0.2 ø16.2 6.4 6.8 7.85 6.8 0 1.45 1.45 24 HA1B E-Stop PCB Mounting Pattern 0.21" 0.21" (5.3mm) (5.3mm) 0.34" 0.21" (8.7mm) (5.4mm) Oversize Flush Pushbutton and Pilot Lights 1.02 [25.9] 0.43 [11.0] 0.94 [24.0] 1705151131 800-262-IDEC (4332) • USA & Canada 573 ø1.2 Hole ø1.2 Hole Ø 0.05" (1.2mm) ø1.2 Hole ø18 X2 X2 X1 C NO NC 24 ø21 C NO NC 15.8 X2 X2 X1 C NO NC C NO NC 5 5 1 6 6 6.8 6.4 1.2 1 1.45 1 5 5 1 5 5 18 1 5 5 ø16mm - L6 Series Switches & Pilot Devices Oversize Extended Non-Illuminated Pushbutton 0.59 [15.1] Oversize Unibody Pilot Lights 1.48 [37.5] Mushroom Pushbuttons 1.18 [30.0] 0.79 [20.0] Oversize Selector Switch 0.94 [23.8] 0.77 [19.5] 1705151131 www.IDEC.com 574 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices C NO NC C NO NC C NO NC C NO NC C NO NC C NO NC Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices Oversize Key Switch 1.54 [39.0] Lever Switch 0.94 [23.8] Flush Bezel Selector Switches Illuminated Lever Mounting Flush Bracket Gasket Bezel Metal Plastic Round 2 2 10 17 0.9 0.8 9.8 8.5 2 Square 8.5 2 Rectangular 24 30 9.3 2 Flush Bezel Mounting Hole Layout Round Square Rectangular +0.2 +0.2 20.2 26.2 – 0.1 – 0.1 30 min.∗ 24 min.∗ 24 min.∗ 1705151131 800-262-IDEC (4332) • USA & Canada 575 ø18 ø18 +0.2 ø20.2 – 0.1 ø24 ø24 24 min.∗ C NO NC C NO NC 23 22.6 C NO NC C NO NC 27.4 21.4 21.4 ø21.4 24 min.∗ 26 20 ø 20 20 24 24 18 18 14.8 +0.2 20.2 -0.1 24 min.∗ ø16mm - L6 Series Switches & Pilot Devices Terminal Configurations AL-K6SP Non Illuminated Pushbutton Pilot Lights Illuminated Pushbuttons Buzzer TOP TOP TOP Input Lamp Terminal Lamp Terminal Terminal (+) (+) (X1) Input Buzzer Terminal Sound (X2) Lamp Terminal Lamp Terminal Steady Slow Quick Switch (−) (−) H6-VL2 AL-B6 47 26 TOP 4 15 21 AL-BM6 LFTD LED Lamp 2.5 12 Internal Circuit Gasket Locking Ring Panel Thickness 0.5 to 6 LED Chip Protective Diode Zener Diode AL-B6 26 1705151131 www.IDEC.com 576 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices ø18 ø16.5 ø17.8 CN NO C CN NO C 17.6 ø18 ø16.5 X2 X2 X1 X2 X2 X1 CN NO C CN NO C X2 X2 X1 X1 Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices General Instructions Pushbutton Assembly Lamp Installation Lamps can be replaced in two ways: 1. If contacts are accessible (or pushbutton not installed in a panel) then it is easiest to first remove the contacts from the operator. This will allow easy access to the lamp/lamp-holder assembly. Grab lamp, depress slightly, and turn counter clockwise. Lamp can then be removed by pushing it back through the lamp holder. 2. If contacts are not accessible, then the lamp can be replaced by first removing the lens from the operator. Just pull lens straight out either with a fingernail or optional lens removal tool (MT-101). Lamp/lamp-holder assembly can then be removed with lamp removal tool (OR-44). Insert lamp removal tool through operator, depress slightly, turn counter clockwise, then pull lamp/lamp-holder assembly out. Lamp can then be removed by pushing it back through the lamp holder. Engraving Lenses All buttons and lenses can be engraved directly on the outside surface. Illumi- nated lenses also allow for engraving on a plate that is underneath the colored section of the lens. Remove the colored section of the lens by pulling on the Fitting Grooves Grooves edge while simultaneously unhooking it from the latches on the lens holder. The marking plate will then be accessible. It can then be engraved or a thin marked insert (such as mylar or paper) can be sandwiched between the marking plate Engraving and colored section of the lens. Surface Color Lens Marking Plate Lens Holder Panel Mounting Before any unit can be mounted into a panel, the contact block must be removed. Slide metal locking lever and pull contact off. Loosen and remove the locking ring and square anti-rotation ring from the operator and insert operator through panel cutout from the front of the panel. Slide on anti-rotation ring and tighten locking ring, using locking ring wrench (MT-001). Slide contact block onto operator, observing TOP marking on both parts. Slide metal locking lever in direction indicated by LOCK. The yellow plastic safety lever lock can then be snapped onto the locking lever; this will prevent vibration or maintenance actions from releasing the contact from the operator. PCB Mounting Being able to separate the contacts from the operator allows for assembly of the front panel components (operator and lens) to be performed in tandem with the PC board assembly and soldering. For applications where multiple rows of push- buttons are mounted closely together, or where other components may obstruct access to the contact locking lever, be sure to include access holes in the PC board (refer to PC board layout dimensions for location). Also be sure to allow for space above and to the side of contact to ensure that no components block the contact block locking lever. PC board pins are designed to rest on the PCB, take this into consideration to ensure that pins do not short closely spaced traces. 1705151131 800-262-IDEC (4332) • USA & Canada 577