ş16mm L6 Series Miniature Control Units (07/02/08) ş16 L6 Series Miniature Control Units Series L6 Series Miniature Control Units Mounting Hole Size ş16 Type LA�L/LA�PLA�B LA1T LA�S Appearance Illuminated Pushbuttons Pushbuttons Lever Switches Selector Switches (momentary, maintained) (momentary, maintained) (2-position maintained) (2-position maintained) (2-position spring return) (2-position spring return) Pilot Lights (3-position maintained) (3-position maintained) Unit (3-position spring return) (3-position spring return) Bezel Size ş18 �18 18 × 24 ş18 �18 18 × 24 ş18 ş18 �18 18 × 24 Bezel Color Black LED Lamp Light Source ——— (IDEC’s LFTD type) Lens: amber, blue, green, Button: black, blue, green, Lens/Button Color Lever: black Knob: black white, red, yellow red, white, yellow Contact SPDT, DPDT (gold-clad silver contact, silver contact) ConŢguration Contact Rating 125V AC/0.1A, 30V DC/0.1A (gold-clad silver contact) (resistive load) 125V AC/5A, 30V DC/3A (silver contact) Momentary:100,000 operations minimum 100,000 operations 100,000 operations Electrical Maintained: 100,000 operations minimum minimum minimum Momentary: 2,000,000 operations minimum 250,000 operations 250,000 operations Mechanical Maintained: 250,000 operations minimum minimum minimum Degree of Protection IP65 (IEC 60529) Solder/tab terminal #110 Terminal Style PC board terminal (gold contacts only) Switch Guard Yes Yes — — Socket ———— Terminal Cover Yes Yes Yes Yes Dust Cover Yes Yes — — Mounting Hole Plug Yes Yes Yes Yes Approvals Page 5 8 10 12 2 (07/02/08) Accessories Durability Contact L6 Series Miniature Control Units ş16 L6 Series Miniature Series L6 Series Miniature Control Units Series Control Units Mounting Hole Size ş16 Mounting Hole Size ş16 Type LA�KLA�F Type LA3Z Appearance Appearance Key Selector Switches Illuminated Selector Buzzer (2-position maintained) Switches (2-position spring return) (2-position maintained) (3-position maintained) (2-position spring return) Unit Unit (3-position spring return) (3-position maintained) (3-position spring return) Bezel Size ş18 �18 18 × 24 Bezel Size 18 × 24 Bezel Color Black Bezel Color Black LED lamp Operating Voltage 6V AC/DC Light Source — (IDEC’s LFTD type) (±10%) 12V to 24V AC/DC Sound Pressure Steady sound: 80 dB mini- Illumination color: Key cylinder: (at 0.1m) mum (at the rated voltage) Lens/Button Color amber, blue, green, red, chrome-plated (metal) white, yellow Sound Frequency 2 kHz ±500 Hz Contact Slow intermittent sound: SPDT, DPDT (gold-clad silver contact, silver contact) ConŢguration 55 cycles per minute ±10% Sound Cycle Quick intermittent sound: Contact Rating 125V AC/0.1A, 30V DC/0.1A (gold-clad silver contact) 600 cycles per minute ±10% (resistive load) 125V AC/5A, 30V DC/3A (silver contact) Degree of Protection IP40 (enclosed type) Electrical 100,000 operations minimum Terminal Style Solder/tab terminal #110 Switch Guard — Mechanical 250,000 operations minimum Socket — Degree of Protection IP65 (IEC 60529) Terminal Cover Yes Solder/tab terminal #110 Terminal Style PC board terminal (gold contacts only) Dust Cover — Switch Guard — — Mounting Hole Plug Yes Socket — — • Continuous, intermittent Terminal Cover Yes Yes (slow), intermittent (quick) sounds can be selected Dust Cover — — Remarks with a built-in slide switch. Mounting Hole Plug Yes Yes • PC board terminals also available. Approvals Approvals — Page 13 16 Page 20 (07/02/08) 3 Accessories Durability Contact Accessories Ratings ş16 L6 Series Miniature Control Units Light duty L6 series Suitable for electronic devices and for food processing and packaging industries. • Locking lever removable contact blocks • Bright and clear LED illumination • Gold-clad cross bar contacts and silver contacts • Degree of protection: IP65 (IEC 60529) (except buzzers) • UL recognized and CSA certiŢed (except buzzers) • EN compliant (except buzzers) (EN60947-1, EN60947-5-1, TÜV Rheinland) • RoHS compliant SpeciŢcations and Ratings ˙ Contact Ratings SpeciŢcations Operating Temperature –25 to +55°C (no freezing) • Gold Contact Storage Temperature –30 to +80°C Maximum Voltage 250V AC/DC Operating Humidity 45 to 85% RH (no condensation) Thermal Current 3A Contact Resistance 50 mΩ maximum (initial value) Operating Voltage 125V AC 30V DC Insulation Resistance 100 MΩ minimum (500V DC megger) Operating Current 0.1A 0.1A (resistive load) Between live part and ground: 2,500V AC, 1 minute Contact Material Gold-clad silver Between terminals of different poles: Switch Unit Minimum applicable load (reference value): 5V AC/DC, 1 mA 2,500V AC, 1 minute Dielectric (Applicable range is subject to the operating condition and load.) Between terminals of the same poles: Strength 1,000V AC, 1 minute • Silver Contact Illumination Between live part and ground: Insulation Voltage 250V Unit 2,500V AC, 1 minute Operating Voltage 30V 125V 250V Operating extremes: Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm Resistive Load — 5A 2A AC 2 50/60Hz Damage limits: 1,000 m/s (100G) Inductive Load — 2A 1.5A Operating Shock Resistance 2 Operating extremes: 100 m/s (10G) Current Resistive Load 3A 0.4A — DC Momentary: 2,000,000 Inductive Load 1A 0.2A — Maintained: 250,000 Mechanical Durability Lever switches: 250,000 Thermal Current 5A (minimum operations) Selector switches: 250,000 Contact Material Silver Key selector switches 250,000 Illuminated selector switches: 250,000 AC inductive load: PF = 0.6 to 0.7 DC inductive load: L/R = 7 ms maximum Momentary: 100,000 (∗1, ∗3) Maintained: 100,000 (∗2, ∗3) Lever switches: 100,000 (∗2, ∗3) Built-in LED Lamp Ratings Selector switches: 100,000 (∗2, ∗3) Electrical Durability Key selector switches: 100,000 (∗2, ∗3) Type No. LFTD-5 LFTD-1 LFTD-2 ➁ ➁ ➁ (minimum operations) Illuminated selector switches: 100,000 (∗2, ∗3) ∗1 Switching frequency 1,800 operations/h Lamp Base SX6S/8×5.4 ∗2 Switching frequency 1,200 operations/h Rated Voltage 5V DC 12V AC/DC 24V AC/DC ∗3 125V resistive load 5A: 50,000 3A: 100,000 Operating 5V DC ±5% 12V AC/DC ±10% 24V AC/DC ±10% Degree of Protection IP65 (IEC 60529) Voltage Solder/tab terminal #110 AC — 9 mA 9 mA Terminal Style Current PC board terminal Draw DC 8 mA 8 mA 8 mA 17g (LA1L-M1C24) Specify a color code in place of in the Type No. ➁ 15g (LA1P-1C04) Color Code A (amber), G (green), R (red), S (blue), W (white), ➁ 13g (LA1B-M1C2) Y (yellow) Weight (approx.) 15g (LA1T-2C2) Lamp Base Same as illumination color 15g (LA1S-2C2) Color 27g (LA1K-2C2A) Voltage Marking Die stamped on the lamp base 18g (LA1F-2C24) Approx. 50,000 hours Life (When used on complete DC, luminance reduces to 50% (reference value) of the initial intensity.) A, R, W, Y A, R, W, Y (+) (–) Internal Circuit G, S G, S LED Chip (+) (–) Protection Diode Zener Diode 4 (07/02/08) L6 Series Miniature Control Units ş16 LA1L / LA2L Illuminated Pushbuttons Type No. Operation Contact Operating Lens Color ➁ Shape Contact Solder/Tab PC Board Type Material Voltage Code Terminal Terminal Round SPDT LA1L-M1C11➁ LA1L-M1C11V➁ 5V DC ±5% LA1L DPDT LA1L-M1C21➁ LA1L-M1C21V➁ SPDT LA1L-M1C13➁ LA1L-M1C13V➁ Gold 12V AC/DC ±10% DPDT LA1L-M1C23➁ LA1L-M1C23V➁ SPDT LA1L-M1C14➁ LA1L-M1C14V➁ 24V AC/DC ±10% DPDT LA1L-M1C24➁ LA1L-M1C24V➁ Momentary SPDT LA1L-M1C51➁ — 5V DC ±5% DPDT LA1L-M1C61➁ — SPDT LA1L-M1C53➁ — Silver 12V AC/DC ±10% DPDT LA1L-M1C63➁ — SPDT LA1L-M1C54➁ — 24V AC/DC ±10% DPDT LA1L-M1C64➁ — SPDT LA1L-A1C11➁ LA1L-A1C11V➁ 5V DC ±5% DPDT LA1L-A1C21➁ LA1L-A1C21V➁ SPDT LA1L-A1C13➁ LA1L-A1C13V➁ Gold 12V AC/DC ±10% DPDT LA1L-A1C23➁ LA1L-A1C23V➁ SPDT LA1L-A1C14➁ LA1L-A1C14V➁ 24V AC/DC ±10% DPDT LA1L-A1C24➁ LA1L-A1C24V➁ Maintained SPDT LA1L-A1C51➁ — 5V DC ±5% DPDT LA1L-A1C61➁ — Specify a lens SPDT LA1L-A1C53➁ — color code in Silver 12V AC/DC ±10% DPDT LA1L-A1C63➁ — place of in the ➁ Type No. SPDT LA1L-A1C54➁ — 24V AC/DC ±10% DPDT LA1L-A1C64➁ — A: amber Square SPDT LA2L-M1C11➁ LA2L-M1C11V➁ G: green 5V DC ±5% LA2L DPDT LA2L-M1C21➁ LA2L-M1C21V➁ R: red W: white SPDT LA2L-M1C13➁ LA2L-M1C13V➁ Gold 12V AC/DC ±10% S: blue DPDT LA2L-M1C23➁ LA2L-M1C23V➁ Y: yellow SPDT LA2L-M1C14➁ LA2L-M1C14V➁ 24V AC/DC ±10% DPDT LA2L-M1C24➁ LA2L-M1C24V➁ Momentary SPDT LA2L-M1C51➁ — 5V DC ±5% DPDT LA2L-M1C61➁ — SPDT LA2L-M1C53➁ — Silver 12V AC/DC ±10% DPDT LA2L-M1C63➁ — SPDT LA2L-M1C54➁ — 24V AC/DC ±10% DPDT LA2L-M1C64➁ — SPDT LA2L-A1C11➁ LA2L-A1C11V➁ 5V DC ±5% DPDT LA2L-A1C21➁ LA2L-A1C21V➁ SPDT LA2L-A1C13➁ LA2L-A1C13V➁ Gold 12V AC/DC ±10% DPDT LA2L-A1C23➁ LA2L-A1C23V➁ SPDT LA2L-A1C14➁ LA2L-A1C14V➁ 24V AC/DC ±10% DPDT LA2L-A1C24➁ LA2L-A1C24V➁ Maintained SPDT LA2L-A1C51➁ — 5V DC ±5% DPDT LA2L-A1C61➁ — SPDT LA2L-A1C53➁ — Silver 12V AC/DC ±10% DPDT LA2L-A1C63➁ — SPDT LA2L-A1C54➁ — 24V AC/DC ±10% DPDT LA2L-A1C64➁ — L-shaped lever contact types are also available for collective mounting. To order L-shaped lever contacts, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA1L-M1C11 LA1L-M1T11 ➁ ➁ (07/02/08) 5 ş16 L6 Series Miniature Control Units LA3L / LA4L Illuminated Pushbuttons Type No. Operation Contact Operating Lens Color ➁ Shape Contact Solder/Tab PC Board Type Material Voltage Code Terminal Terminal Rectangular SPDT LA3L-M1C11➁ LA3L-M1C11V➁ 5V DC ±5% LA3L DPDT LA3L-M1C21➁ LA3L-M1C21V➁ SPDT LA3L-M1C13➁ LA3L-M1C13V➁ Gold 12V AC/DC ±10% DPDT LA3L-M1C23➁ LA3L-M1C23V➁ SPDT LA3L-M1C14➁ LA3L-M1C14V➁ 24V AC/DC ±10% DPDT LA3L-M1C24➁ LA3L-M1C24V➁ Momentary SPDT LA3L-M1C51➁ — 5V DC ±5% DPDT LA3L-M1C61➁ — SPDT LA3L-M1C53➁ — Silver 12V AC/DC ±10% DPDT LA3L-M1C63➁ — SPDT LA3L-M1C54➁ — 24V AC/DC ±10% DPDT LA3L-M1C64➁ — SPDT LA3L-A1C11➁ LA3L-A1C11V➁ 5V DC ±5% DPDT LA3L-A1C21➁ LA3L-A1C21V➁ SPDT LA3L-A1C13➁ LA3L-A1C13V➁ Gold 12V AC/DC ±10% DPDT LA3L-A1C23➁ LA3L-A1C23V➁ SPDT LA3L-A1C14➁ LA3L-A1C14V➁ 24V AC/DC ±10% DPDT LA3L-A1C24➁ LA3L-A1C24V➁ Maintained SPDT LA3L-A1C51➁ — 5V DC ±5% DPDT LA3L-A1C61➁ — Specify a lens SPDT LA3L-A1C53➁ — color code in Silver 12V AC/DC ±10% DPDT LA3L-A1C63➁ — place of in the ➁ Type No. SPDT LA3L-A1C54➁ — 24V AC/DC ±10% DPDT LA3L-A1C64➁ — A: amber Rectangular SPDT LA4L-M1C11➁ LA4L-M1C11V➁ G: green 5V DC ±5% 3-sided Barrier DPDT LA4L-M1C21➁ LA4L-M1C21V➁ R: red LA4L W: white SPDT LA4L-M1C13➁ LA4L-M1C13V➁ Gold 12V AC/DC ±10% S: blue DPDT LA4L-M1C23➁ LA4L-M1C23V➁ Y: yellow SPDT LA4L-M1C14➁ LA4L-M1C14V➁ 24V AC/DC ±10% DPDT LA4L-M1C24➁ LA4L-M1C24V➁ Momentary SPDT LA4L-M1C51➁ — 5V DC ±5% DPDT LA4L-M1C61➁ — SPDT LA4L-M1C53➁ — Silver 12V AC/DC ±10% DPDT LA4L-M1C63➁ — SPDT LA4L-M1C54➁ — 24V AC/DC ±10% DPDT LA4L-M1C64➁ — SPDT LA4L-A1C11➁ LA4L-A1C11V➁ 5V DC ±5% DPDT LA4L-A1C21➁ LA4L-A1C21V➁ SPDT LA4L-A1C13➁ LA4L-A1C13V➁ Gold 12V AC/DC ±10% DPDT LA4L-A1C23➁ LA4L-A1C23V➁ SPDT LA4L-A1C14➁ LA4L-A1C14V➁ 24V AC/DC ±10% DPDT LA4L-A1C24➁ LA4L-A1C24V➁ Maintained SPDT LA4L-A1C51➁ — 5V DC ±5% DPDT LA4L-A1C61➁ — SPDT LA4L-A1C53➁ — Silver 12V AC/DC ±10% DPDT LA4L-A1C63➁ — SPDT LA4L-A1C54➁ — 24V AC/DC ±10% DPDT LA4L-A1C64➁ — L-shaped lever contact types are also available for collective mounting. To order L-shaped lever contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA3L-M1C11 LA3L-M1T11 ➁ ➁ 6 (07/02/08) L6 Series Miniature Control Units ş16 LA�P Pilot Lights Type No. Shape Operating Voltage ➁ Lens Color Code Solder/Tab Terminal PC Board Terminal Round LA1P 5V DC ±5% LA1P-1C01➁ LA1P-1C01V➁ 12V AC/DC ±10% LA1P-1C03➁ LA1P-1C03V➁ 24V AC/DC ±10% LA1P-1C04➁ LA1P-1C04V➁ Square LA2P 5V DC ±5% LA2P-1C01➁ LA2P-1C01V➁ 12V AC/DC ±10% LA2P-1C03➁ LA2P-1C03V➁ Specify a lens color code in place of ➁ in the Type No. 24V AC/DC ±10% LA2P-1C04➁ LA2P-1C04V➁ A: amber G: green Rectangular R: red LA3P W: white 5V DC ±5% LA3P-1C01➁ LA3P-1C01V➁ S: blue Y: yellow 12V AC/DC ±10% LA3P-1C03➁ LA3P-1C03V➁ 24V AC/DC ±10% LA3P-1C04➁ LA3P-1C04V➁ Rectangular 3-sided Barrier LA4P 5V DC ±5% LA4P-1C01➁ LA4P-1C01V➁ 12V AC/DC ±10% LA4P-1C03➁ LA4P-1C03V➁ 24V AC/DC ±10% LA4P-1C04➁ LA4P-1C04V➁ L-shaped lever contact types are also available for collective mounting. To order L-shaped lever contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA1P-1C01➁ LA1P-1T01➁ (07/02/08) 7 ş16 L6 Series Miniature Control Units LA1B / LA2B Pushbuttons Type No. Operation Contact Shape Button Type Contact Color Code➀➁ Solder/Tab PC Board Type Material Terminal Terminal Round SPDT LA1B-M1C1➀ LA1B-M1C1V➀ Gold LA1B DPDT LA1B-M1C2➀ LA1B-M1C2V➀ B: black Momentary SPDT LA1B-M1C5➀ — G: green Silver DPDT LA1B-M1C6➀ — R: red Button S: blue SPDT LA1B-A1C1➀ LA1B-A1C1V➀ Gold W: white DPDT LA1B-A1C2➀ LA1B-A1C2V➀ Maintained Y: yellow SPDT LA1B-A1C5➀ — Silver DPDT LA1B-A1C6➀ — SPDT LA1B-M1C1L➁ LA1B-M1C1VL➁ Gold DPDT LA1B-M1C2L➁ LA1B-M1C2VL➁ A: amber Momentary SPDT LA1B-M1C5L➁ — G: green Silver DPDT LA1B-M1C6L➁ — R: red Illumination Lens S: blue SPDT LA1B-A1C1L➁ LA1B-A1C1VL➁ Gold W: white DPDT LA1B-A1C2L➁ LA1B-A1C2VL➁ Maintained Y: yellow SPDT LA1B-A1C5L➁ — Silver DPDT LA1B-A1C6L➁ — Square SPDT LA2B-M1C1➀ LA2B-M1C1V➀ Gold LA2B DPDT LA2B-M1C2➀ LA2B-M1C2V➀ B: black Momentary SPDT LA2B-M1C5➀ — G: green Silver DPDT LA2B-M1C6➀ — R: red Button S: blue SPDT LA2B-A1C1➀ LA2B-A1C1V➀ Gold W: white DPDT LA2B-A1C2➀ LA2B-A1C2V➀ Maintained Y: yellow SPDT LA2B-A1C5➀ — Silver DPDT LA2B-A1C6➀ — SPDT LA2B-M1C1L➁ LA2B-M1C1VL➁ Gold DPDT LA2B-M1C2L➁ LA2B-M1C2VL➁ A: amber Momentary SPDT LA2B-M1C5L➁ — G: green Silver DPDT LA2B-M1C6L➁ — R: red Illumination Lens S: blue SPDT LA2B-A1C1L➁ LA2B-A1C1VL➁ Gold W: white DPDT LA2B-A1C2L➁ LA2B-A1C2VL➁ Maintained Y: yellow SPDT LA2B-A1C5L➁ — Silver DPDT LA2B-A1C6L➁ — L-shaped lever contact types are also available for collective mounting. To order L-shaped lever contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA1B-M1C1➀ LA1B-M1T1➀ 8 (07/02/08) L6 Series Miniature Control Units ş16 LA3B / LA4B Pushbuttons Type No. Operation Contact Shape Button Type Contact Color Code➀➁ Solder/Tab PC Board Type Material Terminal Terminal Rectangular SPDT LA3B-M1C1➀ LA3B-M1C1V➀ Gold LA3B DPDT LA3B-M1C2➀ LA3B-M1C2V➀ B: black Momentary SPDT LA3B-M1C5➀ — G: green Silver DPDT LA3B-M1C6➀ — R: red Button S: blue SPDT LA3B-A1C1➀ LA3B-A1C1V➀ Gold W: white DPDT LA3B-A1C2➀ LA3B-A1C2V➀ Maintained Y: yellow SPDT LA3B-A1C5➀ — Silver DPDT LA3B-A1C6➀ — SPDT LA3B-M1C1L➁ LA3B-M1C1VL➁ Gold DPDT LA3B-M1C2L➁ LA3B-M1C2VL➁ A: amber Momentary SPDT LA3B-M1C5L➁ — G: green Silver DPDT LA3B-M1C6L➁ — R: red Illumination Lens S: blue SPDT LA3B-A1C1L➁ LA3B-A1C1VL➁ Gold W: white DPDT LA3B-A1C2L➁ LA3B-A1C2VL➁ Maintained Y: yellow SPDT LA3B-A1C5L➁ — Silver DPDT LA3B-A1C6L➁ — Rectangular SPDT LA4B-M1C1➀ LA4B-M1C1V➀ Gold 3-sided Barrier DPDT LA4B-M1C2➀ LA4B-M1C2V➀ B: black Momentary LA4B SPDT LA4B-M1C5➀ — G: green Silver DPDT LA4B-M1C6➀ — R: red Button S: blue SPDT LA4B-A1C1➀ LA4B-A1C1V➀ Gold W: white DPDT LA4B-A1C2➀ LA4B-A1C2V➀ Maintained Y: yellow SPDT LA4B-A1C5➀ — Silver DPDT LA4B-A1C6➀ — SPDT LA4B-M1C1L➁ LA4B-M1C1VL➁ Gold DPDT LA4B-M1C2L➁ LA4B-M1C2VL➁ A: amber Momentary SPDT LA4B-M1C5L➁ — G: green Silver DPDT LA4B-M1C6L➁ — R: red Illumination Lens S: blue SPDT LA4B-A1C1L➁ LA4B-A1C1VL➁ Gold W: white DPDT LA4B-A1C2L➁ LA4B-A1C2VL➁ Maintained Y: yellow SPDT LA4B-A1C5L➁ — Silver DPDT LA4B-A1C6L➁ — L-shaped lever contact types are also available for collective mounting. To order L-shaped lever contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA3B-M1C1➀ LA3B-M1T1➀ (07/02/08) 9 ş16 L6 Series Miniature Control Units LA1T Lever Switches Type No. Contact Shape Lever Operation Contact Solder/Tab PC Board Material Terminal Terminal Round Maintained SPDT LA1T-2C1 LA1T-2C1V Gold LA1T U DPDT LA1T-2C2 LA1T-2C2V SPDT LA1T-2C5 — Silver D DPDT LA1T-2C6 — Spring return from top SPDT LA1T-21C1 LA1T-21C1V Gold U DPDT LA1T-21C2 LA1T-21C2V 2-position SPDT LA1T-21C5 — D Silver DPDT LA1T-21C6 — Spring return from bottom SPDT LA1T-22C1 LA1T-22C1V Gold U DPDT LA1T-22C2 LA1T-22C2V SPDT LA1T-22C5 — D Silver DPDT LA1T-22C6 — U Maintained Gold DPDT LA1T-3C2 LA1T-3C2V C Silver DPDT LA1T-3C6 — D U Spring return from top Gold DPDT LA1T-31C2 LA1T-31C2V C Silver DPDT LA1T-31C6 — D 3-position U Spring return from bottom Gold DPDT LA1T-32C2 LA1T-32C2V C Silver DPDT LA1T-32C6 — D U Spring return two-way Gold DPDT LA1T-33C2 LA1T-33C2V C Silver DPDT LA1T-33C6 — D L-shaped lever contact types are also available for collective mounting. To order L-shaped lever contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA1T-2C1 LA1T-2T1 Contact Operation Operator Position & Contact Operation (Top View) Contact Down Center Up NO NC NO NC SPDT — C C 90° 2-position Maintained Left Right Left Right Spring return from top Contact Contact Contact Contact NO NC NO NC NO NC NO NC DPDT — C C C C NO NC NO NC SPDT — C C 90° 2-position Spring return from bottom Right Left Right Left Contact Contact Contact Contact NO NC NO NC NO NC NO NC DPDT — C C C C Left Right Left Right Left Right Contact Contact Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC 45° 3-position DPDT C C C C C C 10 (07/02/08) LOCK TOP LOCK L6 Series Miniature Control Units ş16 Dimensions Pilot Lights Pushbuttons Illuminated Pushbuttons Panel Thickness 0.5 to 6 Note: Gasket 5.7 1. Pushbuttons do not have lamp terminals. Locking Ring 2. Pilot lights have only lamp terminals. 3. See page 26 for L-shaped lever contact types. Anti-rotation Ring 0.6 Rectangular Tab Terminal Width 2.8×0.5t R15.5 PC Board Terminal Round Square Rectangular 3-sided Barrier Width 0.8×0.5t 1 2.6 2 10.5 13.5 24 24 18 17.8 5.5 936 9 PC Board Terminal Solder/Tab Terminal Lever Switches 10.8 24 Mounting Hole Layout Standard Contact Type +0.2 ø16.2 0 Note: Determine mounting centers to ensure easy operation. • See page 26 for L-shaped lever contact types. 24 Terminal Arrangement (Bottom View) Pushbuttons Illuminated Pushbuttons Pilot Lights Lever Switches TOP TOP TOP Lamp Terminal Lamp Terminal (+) (+) Lamp Terminal Lamp Terminal (−) (−) SPDT has C, NO, and NC only on the right. X2 terminals are interconnected. SPDT has C, NO, and NC X2 terminals are interconnected. only on the right. PC Board Drilling Layout (Bottom View) Pushbuttons Illuminated Pushbuttons Pilot Lights Lever Switches 7.85 6.8 6.4 6.8 1.45 1.45 All dimensions in mm. • See One Board Mounting on page 26 for details about PC boards. (07/02/08) 11 ş18 ø18 ş1.2 Hole ş1.2 Hole ş1.2 Hole ş21 15.8 7.85 24 X2 X2 X1 C NO NC C NO NC X2 X2 X1 6.8 5 5 1.45 CN NOC 1 1 5 5 CN NOC 6 6 6.8 6.4 1.2 1 1.45 X2 X2 X1 1 5 5 CN NOC 1 CN NOC 5 5 18 ş16 L6 Series Miniature Control Units LA�S Selector Switches Type No. Contact Shape Position Contact Solder/Tab PC Board Material Terminal Terminal Round SPDT LA1S-2C1 LA1S-2C1V Gold LA1S L R DPDT LA1S-2C2 LA1S-2C2V Maintained SPDT LA1S-2C5 — Silver DPDT LA1S-2C6 — 90° 2-position SPDT LA1S-21C1 LA1S-21C1V Gold L R DPDT LA1S-21C2 LA1S-21C2V Spring return from right SPDT LA1S-21C5 — Silver DPDT LA1S-21C6 — C Gold DPDT LA1S-3C2 LA1S-3C2V L R Maintained Silver DPDT LA1S-3C6 — C Gold DPDT LA1S-31C2 LA1S-31C2V Spring return L R from right Silver DPDT LA1S-31C6 — 45° 3-position C Gold DPDT LA1S-32C2 LA1S-32C2V Spring return L R from left Silver DPDT LA1S-32C6 — C Gold DPDT LA1S-33C2 LA1S-33C2V Spring return L R two-way Silver DPDT LA1S-33C6 — Square SPDT LA2S-2C1 LA2S-2C1V Gold LA2S L R DPDT LA2S-2C2 LA2S-2C2V Maintained SPDT LA2S-2C5 — Silver DPDT LA2S-2C6 — 90° 2-position SPDT LA2S-21C1 LA2S-21C1V Gold L R DPDT LA2S-21C2 LA2S-21C2V Spring return from right SPDT LA2S-21C5 — Silver DPDT LA2S-21C6 — C Gold DPDT LA2S-3C2 LA2S-3C2V L R Maintained Silver DPDT LA2S-3C6 — C Gold DPDT LA2S-31C2 LA2S-31C2V Spring return L R from right Silver DPDT LA2S-31C6 — 45° 3-position C Gold DPDT LA2S-32C2 LA2S-32C2V Spring return L R from left Silver DPDT LA2S-32C6 — C Gold DPDT LA2S-33C2 LA2S-33C2V Spring return L R two-way Silver DPDT LA2S-33C6 — Rectangular SPDT LA3S-2C1 LA3S-2C1V Gold LA3S L R DPDT LA3S-2C2 LA3S-2C2V Maintained SPDT LA3S-2C5 — Silver DPDT LA3S-2C6 — 90° 2-position SPDT LA3S-21C1 LA3S-21C1V Gold L R DPDT LA3S-21C2 LA3S-21C2V Spring return from right SPDT LA3S-21C5 — Silver DPDT LA3S-21C6 — C Gold DPDT LA3S-3C2 LA3S-3C2V L R Maintained Silver DPDT LA3S-3C6 — C Gold DPDT LA3S-31C2 LA3S-31C2V Spring return L R from right Silver DPDT LA3S-31C6 — 45° 3-position C Gold DPDT LA3S-32C2 LA3S-32C2V Spring return L R from left Silver DPDT LA3S-32C6 — C Gold DPDT LA3S-33C2 LA3S-33C2V Spring return L R two-way Silver DPDT LA3S-33C6 — • For contact operation, see page 19. • L-shaped lever contact types are also available for collective mounting. To order L-shaped contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA1S-2C1 LA1S-2T1 12 (07/02/08) L6 Series Miniature Control Units ş16 LA1K Key Selector Switches Type No. Key Retained Contact Shape Position Contact Solder/Tab PC Board at ���� Material Terminal Terminal Round SPDT LA1K-2C1A LA1K-2C1VA Gold LA1K LR DPDT LA1K-2C2A LA1K-2C2VA A SPDT LA1K-2C5A — Silver DPDT LA1K-2C6A — SPDT LA1K-2C1B LA1K-2C1VB Gold L R DPDT LA1K-2C2B LA1K-2C2VB Maintained B SPDT LA1K-2C5B — Silver DPDT LA1K-2C6B — 90° 2-position SPDT LA1K-2C1C LA1K-2C1VC Gold L L R DPDT LA1K-2C2C LA1K-2C2VC C SPDT LA1K-2C5C — Silver DPDT LA1K-2C6C — SPDT LA1K-21C1B LA1K-21C1VB Silver L R DPDT LA1K-21C2B LA1K-21C2VB Spring return B from right SPDT LA1K-21C5B — Gold DPDT LA1K-21C6B — C Gold DPDT LA1K-3C2A LA1K-3C2VA L R A Silver DPDT LA1K-3C6A — C Gold DPDT LA1K-3C2B LA1K-3C2VB L R B Silver DPDT LA1K-3C6B — C Gold DPDT LA1K-3C2C LA1K-3C2VC L R C Silver DPDT LA1K-3C6C — C Gold DPDT LA1K-3C2D LA1K-3C2VD L R Maintained D Silver DPDT LA1K-3C6D — C Gold DPDT LA1K-3C2E LA1K-3C2VE L R E Silver DPDT LA1K-3C6E — C Gold DPDT LA1K-3C2G LA1K-3C2VG L R G Silver DPDT LA1K-3C6G — C Gold DPDT LA1K-3C2H LA1K-3C2VH L R H Silver DPDT LA1K-3C6H — 45° 3-position C Gold DPDT LA1K-31C2B LA1K-31C2VB L R B Silver DPDT LA1K-31C6B — C Gold DPDT LA1K-31C2D LA1K-31C2VD Spring return L R D from right Silver DPDT LA1K-31C6D — C Gold DPDT LA1K-31C2G LA1K-31C2VG L R G Silver DPDT LA1K-31C6G — C Gold DPDT LA1K-32C2C LA1K-32C2VC L R C Silver DPDT LA1K-32C6C — C Gold DPDT LA1K-32C2D LA1K-32C2VD Spring return L R D from left Silver DPDT LA1K-32C6D — C Gold DPDT LA1K-32C2H LA1K-32C2VH L R H Silver DPDT LA1K-32C6H — C Gold DPDT LA1K-33C2D LA1K-33C2VD Spring return L R D two-way Silver DPDT LA1K-33C6D — • For contact operation, see page 19. • Two keys are supplied. • L-shaped lever contact types are also available for collective mounting. To order L-shaped contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA1K-2C1A LA1K-2T1A (07/02/08) 13 ş16 L6 Series Miniature Control Units LA2K Key Selector Switches Type No. Key Retained Contact Shape Position Contact Solder/Tab PC Board at ���� Material Terminal Terminal Square SPDT LA2K-2C1A LA2K-2C1VA Gold LA2K DPDT LA2K-2C2A LA2K-2C2VA LR A SPDT LA2K-2C5A — Silver DPDT LA2K-2C6A — SPDT LA2K-2C1B LA2K-2C1VB Gold DPDT LA2K-2C2B LA2K-2C2VB L R Maintained B SPDT LA2K-2C5B — Silver DPDT LA2K-2C6B — 90° 2-position SPDT LA2K-2C1C LA2K-2C1VC Gold L L R DPDT LA2K-2C2C LA2K-2C2VC C SPDT LA2K-2C5C — Silver DPDT LA2K-2C6C — SPDT LA2K-21C1B LA2K-21C1VB Silver L R DPDT LA2K-21C2B LA2K-21C2VB Spring return B from right SPDT LA2K-21C5B — Gold DPDT LA2K-21C6B — C Gold DPDT LA2K-3C2A LA2K-3C2VA L R A Silver DPDT LA2K-3C6A — C Gold DPDT LA2K-3C2B LA2K-3C2VB L R B Silver DPDT LA2K-3C6B — C Gold DPDT LA2K-3C2C LA2K-3C2VC L R C Silver DPDT LA2K-3C6C — C Gold DPDT LA2K-3C2D LA2K-3C2VD L R Maintained D Silver DPDT LA2K-3C6D — C Gold DPDT LA2K-3C2E LA2K-3C2VE L R E Silver DPDT LA2K-3C6E — C Gold DPDT LA2K-3C2G LA2K-3C2VG L R G Silver DPDT LA2K-3C6G — C Gold DPDT LA2K-3C2H LA2K-3C2VH L R H Silver DPDT LA2K-3C6H — 45° 3-position C Gold DPDT LA2K-31C2B LA2K-31C2VB L R B Silver DPDT LA2K-31C6B — C Gold DPDT LA2K-31C2D LA2K-31C2VD Spring return L R D from right Silver DPDT LA2K-31C6D — C Gold DPDT LA2K-31C2G LA2K-31C2VG L R G Silver DPDT LA2K-31C6G — C Gold DPDT LA2K-32C2C LA2K-32C2VC L R C Silver DPDT LA2K-32C6C — C Gold DPDT LA2K-32C2D LA2K-32C2VD Spring return L R D from left Silver DPDT LA2K-32C6D — C Gold DPDT LA2K-32C2H LA2K-32C2VH L R H Silver DPDT LA2K-32C6H — C Gold DPDT LA2K-33C2D LA2K-33C2VD Spring return L R D two-way Silver DPDT LA2K-33C6D — • For contact operation, see page 19. • Two keys are supplied. • L-shaped lever contact types are also available for collective mounting. To order L-shaped contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA2K-2C1A LA2K-2T1A 14 (07/02/08) L6 Series Miniature Control Units ş16 LA3K Key Selector Switches Type No. Key Retained Contact Shape Position Contact Solder/Tab PC Board �� at �� Material Terminal Terminal Rectangular SPDT LA3K-2C1A LA3K-2C1VA Gold LA3K DPDT LA3K-2C2A LA3K-2C2VA LR A SPDT LA3K-2C5A — Silver DPDT LA3K-2C6A — SPDT LA3K-2C1B LA3K-2C1VB Gold DPDT LA3K-2C2B LA3K-2C2VB L R Maintained B SPDT LA3K-2C5B — Silver DPDT LA3K-2C6B — 90° 2-position SPDT LA3K-2C1C LA3K-2C1VC Gold DPDT LA3K-2C2C LA3K-2C2VC L L R C SPDT LA3K-2C5C — Silver DPDT LA3K-2C6C — SPDT LA3K-21C1B LA3K-21C1VB Silver L R DPDT LA3K-21C2B LA3K-21C2VB Spring return B from right SPDT LA3K-21C5B — Gold DPDT LA3K-21C6B — C Gold DPDT LA3K-3C2A LA3K-3C2VA L R A Silver DPDT LA3K-3C6A — C Gold DPDT LA3K-3C2B LA3K-3C2VB L R B Silver DPDT LA3K-3C6B — C Gold DPDT LA3K-3C2C LA3K-3C2VC L R C Silver DPDT LA3K-3C6C — C Gold DPDT LA3K-3C2D LA3K-3C2VD L R Maintained D Silver DPDT LA3K-3C6D — C Gold DPDT LA3K-3C2E LA3K-3C2VE L R E Silver DPDT LA3K-3C6E — C Gold DPDT LA3K-3C2G LA3K-3C2VG L R G Silver DPDT LA3K-3C6G — C Gold DPDT LA3K-3C2H LA3K-3C2VH L R H Silver DPDT LA3K-3C6H — 45° 3-position C Gold DPDT LA3K-31C2B LA3K-31C2VB L R B Silver DPDT LA3K-31C6B — C Gold DPDT LA3K-31C2D LA3K-31C2VD Spring return L R D from right Silver DPDT LA3K-31C6D — C Gold DPDT LA3K-31C2G LA3K-31C2VG L R G Silver DPDT LA3K-31C6G — C Gold DPDT LA3K-32C2C LA3K-32C2VC L R C Silver DPDT LA3K-32C6C — C Gold DPDT LA3K-32C2D LA3K-32C2VD Spring return L R D from left Silver DPDT LA3K-32C6D — C Gold DPDT LA3K-32C2H LA3K-32C2VH L R H Silver DPDT LA3K-32C6H — C Gold DPDT LA3K-33C2D LA3K-33C2VD Spring return L R D two-way Silver DPDT LA3K-33C6D — • For contact operation, see page 19. • Two keys are supplied. • L-shaped lever contact types are also available for collective mounting. To order L-shaped contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA3K-2C1A LA3K-2T1A (07/02/08) 15 ş16 L6 Series Miniature Control Units LA1F Illuminated Selector Switches Type No. Contact Operating ➁ Color Shape Operation Type Contact Solder/Tab PC Board Material Voltage Code Terminal Terminal Round Maintained SPDT LA1F-2C11➁ LA1F-2C11V➁ 5V DC ±5% LA1F DPDT LA1F-2C21➁ LA1F-2C21V➁ SPDT LA1F-2C13➁ LA1F-2C13V➁ Gold 12V AC/DC ±10% DPDT LA1F-2C23➁ LA1F-2C23V➁ SPDT LA1F-2C14➁ LA1F-2C14V➁ 24V AC/DC ±10% DPDT LA1F-2C24➁ LA1F-2C24V➁ L R SPDT LA1F-2C51➁ — 5V DC ±5% DPDT LA1F-2C61➁ — SPDT LA1F-2C53➁ — Silver 12V AC/DC ±10% DPDT LA1F-2C63➁ — SPDT LA1F-2C54➁ — 24V AC/DC ±10% DPDT LA1F-2C64➁ — Spring return SPDT LA1F-21C11➁ LA1F-21C11V➁ 5V DC ±5% from right DPDT LA1F-21C21➁ LA1F-21C21V➁ SPDT LA1F-21C13➁ LA1F-21C13V➁ Gold 12V AC/DC ±10% DPDT LA1F-21C23➁ LA1F-21C23V➁ SPDT LA1F-21C14➁ LA1F-21C14V➁ 24V AC/DC ±10% DPDT LA1F-21C24➁ LA1F-21C24V➁ L R SPDT LA1F-21C51 — ➁ 5V DC ±5% DPDT LA1F-21C61 — ➁ SPDT LA1F-21C53 — ➁ Silver 12V AC/DC ±10% DPDT LA1F-21C63 — ➁ A: amber SPDT LA1F-21C54 — ➁ G: green 24V AC/DC ±10% DPDT LA1F-21C64➁ — R: red W: white Maintained 5V DC ±5% DPDT LA1F-3C21➁ LA1F-3C21V➁ S: blue Gold 12V AC/DC ±10% DPDT LA1F-3C23➁ LA1F-3C23V➁ Y: yellow 24V AC/DC ±10% DPDT LA1F-3C24➁ LA1F-3C24V➁ C L R 5V DC ±5% DPDT LA1F-3C61➁ — Silver 12V AC/DC ±10% DPDT LA1F-3C63➁ — 24V AC/DC ±10% DPDT LA1F-3C64➁ — Spring return 5V DC ±5% DPDT LA1F-31C21➁ LA1F-31C21V➁ from right Gold 12V AC/DC ±10% DPDT LA1F-31C23➁ LA1F-31C23V➁ 24V AC/DC ±10% DPDT LA1F-31C24➁ LA1F-31C24V➁ C L R 5V DC ±5% DPDT LA1F-31C61➁ — Silver 12V AC/DC ±10% DPDT LA1F-31C63➁ — 24V AC/DC ±10% DPDT LA1F-31C64➁ — Spring return 5V DC ±5% DPDT LA1F-32C21➁ LA1F-32C21V➁ from left Gold 12V AC/DC ±10% DPDT LA1F-32C23➁ LA1F-32C23V➁ 24V AC/DC ±10% DPDT LA1F-32C24➁ LA1F-32C24V➁ C L R 5V DC ±5% DPDT LA1F-32C61➁ — Silver 12V AC/DC ±10% DPDT LA1F-32C63➁ — 24V AC/DC ±10% DPDT LA1F-32C64➁ — 5V DC ±5% DPDT LA1F-33C21➁ LA1F-33C21V➁ Spring return two-way Gold 12V AC/DC ±10% DPDT LA1F-33C23➁ LA1F-33C23V➁ 24V AC/DC ±10% DPDT LA1F-33C24➁ LA1F-33C24V➁ C L R 5V DC ±5% DPDT LA1F-33C61➁ — Silver 12V AC/DC ±10% DPDT LA1F-33C63➁ — 24V AC/DC ±10% DPDT LA1F-33C64➁ — • Specify a color code in place of ➁ in the Type No. • For contact operation, see page 19. • L-shaped lever contact types are also available for collective mounting. To order L-shaped contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA1F-2C11➁ LA1F-2T11➁ 16 (07/02/08) 45° 3-position 90° 2-position L6 Series Miniature Control Units ş16 LA2F Illuminated Selector Switches Type No. Contact Operating ➁ Color Shape Operation Type Contact Solder/Tab PC Board Material Voltage Code Terminal Terminal Square Maintained SPDT LA2F-2C11➁ LA2F-2C11V➁ 5V DC ±5% LA2F DPDT LA2F-2C21➁ LA2F-2C21V➁ SPDT LA2F-2C13➁ LA2F-2C13V➁ Gold 12V AC/DC ±10% DPDT LA2F-2C23➁ LA2F-2C23V➁ SPDT LA2F-2C14➁ LA2F-2C14V➁ 24V AC/DC ±10% DPDT LA2F-2C24➁ LA2F-2C24V➁ L R SPDT LA2F-2C51➁ — 5V DC ±5% DPDT LA2F-2C61➁ — SPDT LA2F-2C53➁ — Silver 12V AC/DC ±10% DPDT LA2F-2C63➁ — SPDT LA2F-2C54➁ — 24V AC/DC ±10% DPDT LA2F-2C64➁ — Spring return SPDT LA2F-21C11➁ LA2F-21C11V➁ 5V DC ±5% from right DPDT LA2F-21C21➁ LA2F-21C21V➁ SPDT LA2F-21C13➁ LA2F-21C13V➁ Gold 12V AC/DC ±10% DPDT LA2F-21C23➁ LA2F-21C23V➁ SPDT LA2F-21C14➁ LA2F-21C14V➁ 24V AC/DC ±10% DPDT LA2F-21C24➁ LA2F-21C24V➁ L R SPDT LA2F-21C51 — ➁ 5V DC ±5% DPDT LA2F-21C61 — ➁ SPDT LA2F-21C53 — ➁ Silver 12V AC/DC ±10% DPDT LA2F-21C63 — ➁ A: amber SPDT LA2F-21C54 — ➁ G: green 24V AC/DC ±10% DPDT LA2F-21C64➁ — R: red W: white Maintained 5V DC ±5% DPDT LA2F-3C21➁ LA2F-3C21V➁ S: blue Gold 12V AC/DC ±10% DPDT LA2F-3C23➁ LA2F-3C23V➁ Y: yellow 24V AC/DC ±10% DPDT LA2F-3C24➁ LA2F-3C24V➁ C L R 5V DC ±5% DPDT LA2F-3C61➁ — Silver 12V AC/DC ±10% DPDT LA2F-3C63➁ — 24V AC/DC ±10% DPDT LA2F-3C64➁ — Spring return 5V DC ±5% DPDT LA2F-31C21➁ LA2F-31C21V➁ from right Gold 12V AC/DC ±10% DPDT LA2F-31C23➁ LA2F-31C23V➁ 24V AC/DC ±10% DPDT LA2F-31C24➁ LA2F-31C24V➁ C L R 5V DC ±5% DPDT LA2F-31C61➁ — Silver 12V AC/DC ±10% DPDT LA2F-31C63➁ — 24V AC/DC ±10% DPDT LA2F-31C64➁ — Spring return 5V DC ±5% DPDT LA2F-32C21➁ LA2F-32C21V➁ from left Gold 12V AC/DC ±10% DPDT LA2F-32C23➁ LA2F-32C23V➁ 24V AC/DC ±10% DPDT LA2F-32C24➁ LA2F-32C24V➁ C L R 5V DC ±5% DPDT LA2F-32C61➁ — Silver 12V AC/DC ±10% DPDT LA2F-32C63➁ — 24V AC/DC ±10% DPDT LA2F-32C64➁ — 5V DC ±5% DPDT LA2F-33C21➁ LA2F-33C21V➁ Spring return two-way Gold 12V AC/DC ±10% DPDT LA2F-33C23➁ LA2F-33C23V➁ 24V AC/DC ±10% DPDT LA2F-33C24➁ LA2F-33C24V➁ C L R 5V DC ±5% DPDT LA2F-33C61➁ — Silver 12V AC/DC ±10% DPDT LA2F-33C63➁ — 24V AC/DC ±10% DPDT LA2F-33C64➁ — • Specify a color code in place of ➁ in the Type No. • For contact operation, see page 19. • L-shaped lever contact types are also available for collective mounting. To order L-shaped contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever contact type) Example: LA2F-2C11➁ LA2F-2T11➁ (07/02/08) 17 45° 3-position 90° 2-position ş16 L6 Series Miniature Control Units LA3F Illuminated Selector Switches Type No. Contact Operating ➁ Color Shape Operation Type Contact Solder/Tab PC Board Material Voltage Code Terminal Terminal Rectangular Maintained SPDT LA3F-2C11➁ LA3F-2C11V➁ 5V DC ±5% LA3F DPDT LA3F-2C21➁ LA3F-2C21V➁ SPDT LA3F-2C13➁ LA3F-2C13V➁ Gold 12V AC/DC ±10% DPDT LA3F-2C23➁ LA3F-2C23V➁ SPDT LA3F-2C14➁ LA3F-2C14V➁ 24V AC/DC ±10% DPDT LA3F-2C24➁ LA3F-2C24V➁ L R SPDT LA3F-2C51➁ — 5V DC ±5% DPDT LA3F-2C61➁ — SPDT LA3F-2C53➁ — Silver 12V AC/DC ±10% DPDT LA3F-2C63➁ — SPDT LA3F-2C54➁ — 24V AC/DC ±10% DPDT LA3F-2C64➁ — Spring return SPDT LA3F-21C11➁ LA3F-21C11V➁ 5V DC ±5% from right DPDT LA3F-21C21➁ LA3F-21C21V➁ SPDT LA3F-21C13➁ LA3F-21C13V➁ Gold 12V AC/DC ±10% DPDT LA3F-21C23➁ LA3F-21C23V➁ SPDT LA3F-21C14➁ LA3F-21C14V➁ 24V AC/DC ±10% DPDT LA3F-21C24➁ LA3F-21C24V➁ L R SPDT LA3F-21C51 — ➁ 5V DC ±5% DPDT LA3F-21C61 — ➁ SPDT LA3F-21C53 — ➁ Silver 12V AC/DC ±10% DPDT LA3F-21C63 — ➁ A: amber SPDT LA3F-21C54 — ➁ G: green 24V AC/DC ±10% DPDT LA3F-21C64➁ — R: red W: white Maintained 5V DC ±5% DPDT LA3F-3C21➁ LA3F-3C21V➁ S: blue Gold 12V AC/DC ±10% DPDT LA3F-3C23➁ LA3F-3C23V➁ Y: yellow 24V AC/DC ±10% DPDT LA3F-3C24➁ LA3F-3C24V➁ C L R 5V DC ±5% DPDT LA3F-3C61➁ — Silver 12V AC/DC ±10% DPDT LA3F-3C63➁ — 24V AC/DC ±10% DPDT LA3F-3C64➁ — Spring return 5V DC ±5% DPDT LA3F-31C21➁ LA3F-31C21V➁ from right Gold 12V AC/DC ±10% DPDT LA3F-31C23➁ LA3F-31C23V➁ 24V AC/DC ±10% DPDT LA3F-31C24➁ LA3F-31C24V➁ C L R 5V DC ±5% DPDT LA3F-31C61➁ — Silver 12V AC/DC ±10% DPDT LA3F-31C63➁ — 24V AC/DC ±10% DPDT LA3F-31C64➁ — Spring return 5V DC ±5% DPDT LA3F-32C21➁ LA3F-32C21V➁ from left Gold 12V AC/DC ±10% DPDT LA3F-32C23➁ LA3F-32C23V➁ 24V AC/DC ±10% DPDT LA3F-32C24➁ LA3F-32C24V➁ C L R 5V DC ±5% DPDT LA3F-32C61➁ — Silver 12V AC/DC ±10% DPDT LA3F-32C63➁ — 24V AC/DC ±10% DPDT LA3F-32C64➁ — 5V DC ±5% DPDT LA3F-33C21➁ LA3F-33C21V➁ Spring return two-way Gold 12V AC/DC ±10% DPDT LA3F-33C23➁ LA3F-33C23V➁ 24V AC/DC ±10% DPDT LA3F-33C24➁ LA3F-33C24V➁ C L R 5V DC ±5% DPDT LA3F-33C61➁ — Silver 12V AC/DC ±10% DPDT LA3F-33C63➁ — 24V AC/DC ±10% DPDT LA3F-33C64➁ — • Specify a color code in place of ➁ in the Type No. • For contact operation, see page 19. • L-shaped lever contact types are also available for collective mounting. To order L-shaped contact types, specify “T” in place of “C” in the Type No. (Standard contact type) (L-shaped lever type) Example: LA3F-2C11➁ LA3F-2T11➁ 18 (07/02/08) 45° 3-position 90° 2-position LOCK TP O LOCK L6 Series Miniature Control Units ş16 Contact Operation Operator Position and Contact Position (Top View) Positions Contact Left Center Right NO NC NO NC SPDT — C C L R L R 90° 2-Position Left Right Left Right Contact Contact Contact Contact NO NC NO NC NO NC NO NC Maintained Spring return from right DPDT — C C C C Left Right Left Right Left Right Contact Contact Contact Contact Contact Contact C C C C NO NC NO NC NO NC NO NC L R L R L R NO NC NO NC L R 45° 3-Position DPDT Maintained Spring return Spring return Spring return from right from left two-way C C C C C C Dimensions Selector Switches, Illuminated Selector Switches, Key Selector Switches Panel Thickness 0.5 to 6 Gasket Locking Ring Anti-rotation Ring 0.6 Round Square Rectangular Tab Terminal Width 2.8×0.5t PC Board Terminal R15.5 Width 0.8×0.5t 2.6 1 2 10.5 13.5 9 18 24 17.8 5.5 936 17 PC Board Terminal Solder/Tab Terminal Round Square Rectangular Mounting Hole Layout 9 18 24 Standard Contact Type 26 +0.2 ø16.2 0 Note: Determine mounting centers to ensure easy operation. • See page 26 for L-shaped lever contact types. 24 Terminal Arrangement (Bottom View) PC Board Drilling Layout (Bottom View) Selector Switches Selector Switches Illuminated Selector Switches Illuminated Selector Switches Key Selector Switches Key Selector Switches TOP TOP 6.4 6.8 7.85 1.45 Lamp Terminal (+) Lamp Terminal (−) SPDT has C, NO, and NC SPDT has C, NO, and NC only on the right. • See Single Board Mounting on page 26 for details about only on the right. X2 terminals are interconnected. PC boards. All dimensions in mm. (07/02/08) 19 ş1.2 Hole ş1.2 Hole ø18 ø18 24 ø21 15.8 X2 X2 X1 CN NOC C NO NC C NO NC CN NOC 5 5 1 X2 X2 X1 6 6 6.8 6.4 1.2 1 1.45 CN NOC CN NOC 1 5 5 1 18 18 5 5 LOCK ş16 Series Miniature Control Units LA3Z Buzzers Continuous / intermittent (slow) / inter- SpeciŢcations Insulation Voltage 60V AC/DC mittent (quick) sound can be selected with 6V AC/DC ±10% Operating Voltage a built-in slide switch 12 to 24V AC/DC ±10% • Collective mounting possible. Current Draw AC: 20 mA, DC: 7 mA Sound Pressure Steady sound: 80 dB minimum • Separate type control unit with locking lever, easy installa- (at 0.1m) (at the rated voltage) tion even when mounted collectively. Sound Frequency 2 kHz ±500Hz • Solder/tab and PC board terminal types available. Slow intermittent: • Single board mounting possible. 55 cycles per minute ±10% Sound Cycle Quick intermittent: 600 cycles per minute ±10% Operating Temperature –20 to +55°C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Insulation Resistance 100 MΩ minimum (500V DC megger) Between live and dead parts: Dielectric Strength 1,000V AC, 1 minute Operating extremes: Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm 2 Shock Resistance Damage limits: 1,000 m/s (100G) Durability 1,000 hours minimum Degree of Protection IP40 (enclosed type) Solder/tab terminal #110 Terminal Style PC board terminal Weight (approx.) 16g Type No. Shape Operating Voltage Solder/Tab Terminal PC Board Terminal Rectangular LA3Z 6V AC/DC ±10% LA3Z-1X2 LA3Z-1X2V 12 to 24V AC/DC ±10% LA3Z-1X4 LA3Z-1X4V • L-shaped lever types are not available. Dimensions PC Board Terminal Tab Terminal Panel Thickness 0.8W×0.5t 2-R0.6 2.8W×0.5t 0.5 to 6 R15.5 X2 X1 1 2.6 2 10.5 13.5 24 17.8 5.5 936 9 PC Board Terminal Type Solder/Tab Terminal Type Terminal Arrangement PC Board Layout (Bottom View) Mounting Hole Layout (Bottom View) 15.7 +0.2 ş16.2 0 7.85 Interconnected Buzzer Sound Switch Interconnected (Built-in) Steady Slow Quick 24 ş7 X1 and X1, X2 and X2 are connected internally. Drilled hole for switching All dimensions in mm. 20 (07/02/08) ş1.2 Hole X2 X2 ø21 15.8 6 X1 X1 2.7 6 24 1.2 5 4.1 18 2.7 5 Mounting Hole Mounting Hole L6 Series Miniature Control Units ş16 Accessories Ordering Package Shape Material Type No. Dimensions (mm) Type No. Quantity • Used to tighten the locking ring when Locking Ring Wrench installing an L6 control unit onto a panel. Metal • Tighten the locking ring to a torque of ş18 (nickel-plated MT-001 MT-001 1 0.88 N·m maximum. brass) 60 • Used to install and remove LED lamps. Lamp Holder Tool ş6.6 Rubber OR-44 OR-44 1 ş7.5 60 Lens Removal Tool • Used to remove lens and buttons. Stainless MT-101 MT-101 1 Steel 60 • Degree of protection: IP65 Switch Guard • Used to protect pushbuttons from inad- (180° Spring return) vertent operation Round/Square AL-K6SP AL-K6SP 1 • See page 24 for dimensions. Guard (polyarylate) Base (polyacetal) Rectangular AL-KH6SP AL-KH6SP 1 • Mounting centers will differ when the dust Dust Cover cover is used. (See page 24 for dimen- sions.) Round AL-D6 AL-D6 1 • Operating temperature: –10 to +55°C • See page 24 for dimensions. Elastomer (boot) Square AL-DQ6 AL-DQ6 1 Polypropylene (base) Rectangular AL-DH6 AL-DH6 1 • Terminal cover is not attached and must Terminal Cover be ordered separately. • When wiring the terminals, insert the lead wires into the terminal cover holes before soldering. Plastic H6-VL2 H6-VL2PN10 1 • Cannot be used for round and square L- (white) shaped lever contact types. • See page 24 for dimensions. • Degree of protection: IP65 Rubber 26 Nitryl rubber AL-B6 AL-B6PN05 5 (black) Mounting Hole Plug • Degree of protection: IP65 Metal 2.5 12 Metal diecast (Locking ring: AL-BM6 AL-BM6 1 plastic) Gasket Locking Ring Panel Thickness 0.5 to 6 (07/02/08) 21 +0.2 0 +0.2 0 ø16.2 ø16.2 ş18 ø17.8 ş16.5 Spring Return ş16 L6 Series Miniature Control Units Maintenance Parts Package Shape For Use On Material Type No. Ordering Type No. Color Code Quantity Lens Specify a color code in place of ➁ in the Ordering Round AL6M-L➁ AL6M-L➁PN05 Type No. A: amber, C: clear, G: green, R: red, S: blue, Square Polyarylate AL6Q-L➁ AL6Q-L➁PN05 5 Y: yellow Note: When the LED color is white, use a clear (C) Rectangular AL6H-L➁ AL6H-L➁PN05 lens. Button Specify a color code in place of ➀ in the Ordering Round AB6M-B➀ AB6M-B➀ PN05 Type No. B: black, G: green, R: red, S: blue, Y: yellow, Square Polyarylate AB6Q-B➀ AB6Q-B➀ PN05 5 W: white Rectangular AB6H-B➀ AB6H-B➀ PN05 • White Marking Plate Round AL6M-W AL6M-WPN05 • See page 25 for dimen- sions and engraving area. Square Acrylic AL6Q-W AL6Q-WPN05 5 Rectangular AL6H-W AL6H-WPN05 • Black Locking Ring All L6 control units Plastic HA9Z-LN HA9Z-LNPN10 10 Anti-rotation Ring All L6 control units Stainless Steel AL6-LP AL6-LPPN10 10 • Safety lever lock is not Safety Lever Lock attached and must be All L6 control units ordered separately. except L-shaped Polyacetal HA9Z-LS HA9Z-LSPN05 5 lever contact types • Thickness: 2.0 mm Spare Key Nickel-plated Key selector AS6-SK-132 AS6-SK-132PN02 2 brass Illuminated Selector Knob Specify a color code in place of ➁ in the Ordering Type No. Illuminated selector Plastic LA1A-F➁ LA1A-F➁PN02 2 A: amber, G: green, R: red, S: blue, Y: yellow, W: white 22 (07/02/08) L6 Series Miniature Control Units ş16 LED Lamps Current Draw Ordering ➁ Illumination Package Operating Voltage Type No. Base Type No. Color Code Quantity AC DC 5V DC ±5% LFTD-5➁ 1 — 8 mA LFTD-5➁ Specify a color code LFTD-5➁PN10 in place of ➁ in the 10 Ordering Type No. 12V AC/DC ±10% LFTD-1➁ 1 A: amber 9 mA 8 mA LFTD-1➁ SX6S/8×5.4 G: green LFTD-1➁PN10 10 R: red S: blue 24V AC/DC ±10% LFTD-2➁ W: white 1 Y: yellow 9 mA 8 mA LFTD-2➁ LFTD-2➁PN10 10 Transformer Shape Primary Voltage Secondary Voltage Type No. Applicable LED Lamp Separate Mounting Type for 24V 100/110V AC TWR512 200/220V AC 24V AC, 0.5W TWR522 LFTD-2➁ 400/440V AC TWR542 • Terminal covers are supplied. • Connect only one LFTD LED lamp to each transformer. • Use plastic mounting clip BC9Z-E/NS35N when mounting 400/440V AC primary voltage models. SpeciŢcations Dimensions 100/110V AC, 200/220V AC, M3.5 Terminal Screws Operating Voltage 400/440V AC (50/60 Hz) Power Consumption 2.4VA Rated Insulation Voltage 600V Secondary Side Primary Side Insulation Resistance 100 MΩ minimum (500V DC megger) Dielectric Strength 2500V AC, 1 minute Mounting Holes 40 Operating 2-ø3.3 48 –30 to +60°C (no freezing) Standard Temperature Operating Condition 52 Relative Humidity 35 to 85% (no condensation) Operating Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm Extremes 2 Terminal Shock Resistance Damage Limits 1,000 m/s (100G) Cover Terminal Screw M3.5 2 Applicable Wire 2 mm maximum, 2 wires maximum All dimensions in mm. Accessories Package Description Appearance Description Type No. Ordering Type No. Quantity Aluminum Weight: Approx. 200g BAA1000 BAA1000PN10 Length: 1m DIN Rail Steel Weight: Approx. 320g BAP1000 BAP1000PN10 Length: 1m 10 Steel BNL6 BNL6PN10 Weight: Approx.15g 45 9 Mounting Clip 9.5 48.6 Plastic BC9Z-E/NS35N BC9Z-E/NS35NPN10 Weight: Approx.15g • Use plastic mounting clip BC9Z-E/NS35N when using 400/440V AC primary voltage transformers. (07/02/08) 23 32.8 40 22 41 30 R22 ş16 L6 Series Miniature Control Units Dimensions • Switch Guard For Round/Square Units (AL-K6SP) For Rectangular Units (AL-KH6SP) 18 24 34 Panel Thickness 0.5 to 5 14 19 minimum 25 minimum • Dust Cover For Round Units (AL-DM6) For Square Units (AL-DQ6) For Rectangular Units (AL-DH6) 13 Panel Thickness 0.5 to 5 24 ş24 30 Waterproof gasket Waterproof gasket for dust cover Waterproof gasket for dust cover for dust cover Mounting Hole Layout Round/Square Units Rectangular Units +0.2 +0.2 ş16.2 ş16.2 0 0 30 minimum 24 minimum Note: Determine mounting centers to ensure easy operation. • Terminal Cover 47 TOP Depth behind the panel when using terminal cover: 47 mm 4 15 21 • Marking Plate Shape Size Engraving area Round ş13.7 mm ş12 mm Square �13.7 mm �12 mm Rectangular 13.7×19.7 mm 12×18 mm Engraving depth: 0.5 mm maximum 24 (07/02/08) 0.3 13 7.5 24 minimum 23.5 10.5 13 0.3 13 45.5 minimum 7.5 17.6 23.5 10.5 13 24 minimum 0.3 13 7.5 24 45.5 minimum 33 L6 Series Miniature Control Units ş16 Safety Precautions • Turn off power to the L6 series control units before installa- • For wiring, use wires of proper size to meet the voltage and tion, removal, wiring, maintenance, and inspection. Failure current requirements. Improper soldering may cause over- to turn power off may cause electrical shocks or Ţre haz- heating and create a Ţre hazard. ard. • To avoid burning your hand, use the lamp holder tool when replacing lamps. Instructions Replacement of Lens and Marking Plate • Removal Remove the operator (color lens, marking plate, lens holder, and spring) by holding the color lens recesses with the Lens Removal Tool (MT-101) and pulling it out. Remove the marking plate by disengaging the latches between the color lens and lens holder. The marking plate must be engraved on the front side as shown 2. Press the lamp head to remove from the lamp holder. below. Fitting Grooves Grooves Engraving Surface Color Lens Marking Plate Lens Holder • Installing the LED lamp from the front of the panel When using a color Ţlm, insert it between the color lens and 1. Insert the LED lamp head into the lamp holder. Make sure that marking plate. the lamp is pushed in completely. Illumination selector knob can be removed by turning the knob and 2. Hold the bulb with the lamp holder tool (OR-44) as shown below. pulling it out. Lamp Holder Lamp Holder Tool • Installation Place the marking plate on the lens holder in the correct direction, and press the color lens onto the lens holder to engage the latches. Insert the lens holder into the housing in the correct direction. 3. Place the insertion guide of the lamp holder and the TOP mark- ing side or the groove in the operator unit in the same direction. Marking Insert the lamp holder into the housing with the lamp holder tool. For L6 series illuminated pushbuttons, legends and symbols can be Then push the lamp lightly and turn it clockwise to install. engraved on the built-in marking plates, or printed Ţlm can be • Replacing the LED lamp by removing the contact inserted under the lens. block • Marking Plate & Engraving Area The LED lamp can be replaced easily by removing the contact Lens Round Square Rectangular block. Engraving Engraving Engraving Area Area Area 18.0 12.0 12.0 • Engraving must be made on the engraving area less than 0.5mm deep. • The marking plate is made of white acrylic resin. Panel Mounting Remove the contact block from the operator. Insert the operator into the panel cut-out from the front, then install the contact block to the operator. 19.6 11.8 13.6 • Removing the contact block Turn the locking lever on the contact block in the • Two 0.1mm-thick Ţlms or one 0.2mm-thick Ţlm can be installed in direction opposite to the arrow on the housing. the lens. Then the contact block can be removed. • Marking Ţlm is not supplied. •Installing the contact block • Recommended marking Ţlm: Polyester Ţlm Insert the contact block with the TOP markings on the contact block and the operator placed in the Replacing the LED Lamp same direction. Then lock the units, turning the locking lever in the Lamps can be replaced using the lamp holder tool (OR-44) from the direction of the arrow. front of the panel, or by removing the contact block from the • Notes for mounting operator unit. Use the optional Ring Wrench (MT-001) to mount the operator onto • Removing the LED lamp from the front of the panel a panel. Tightening torque should not exceed 0.88 N·m. Do not use pliers. Do not tighten with excessive force, otherwise the locking 1. Slip the lamp holder tool onto the lamp head. Then push slightly, ring will be damaged. and turn the lamp holder tool counterclockwise. (07/02/08) 25 Applicable Marking Film Built-in Marking Plate 0.8 ş12.0 ş13.6 0.8 13.6 0.8 12.0 ( ) 9-ş1.2 Note 2 ( ) 9-ş1.2 Note 2 ş16 L6 Series Miniature Control Units Instructions • Dimensions Wiring PC Board Terminal Solder the terminal at 350°C within 3 seconds using a 60W solder- Width 0.8×0.5 Tab Terminal 2.8×0.5t LOCK ing iron. Sn-Ag-Cu type is recommended when using lead-free sol- der. When soldering, do not touch the switch housing with the soldering iron. Also ensure that no tensile force is applied to the terminal. Do not bend the terminal or apply excessive force to the terminal. 2.6 2 2.6 .6 17.8 2 13.5 Use a non-corrosive rosin ţux. 5.5 9 36 9 Notes on Terminal Cover • Mounting Hole Layout +0.1 ş16.0 0 Insert the terminal cover into the contact block with the TOP mark- ings on the contact block and the terminal cover in the same direc- tion. L-shaped Lever Contact Note: When wiring, insert the lead wires into the terminal cover holes before soldering. L-Shaped Lever Contact Type 18 min. (Rectangular: 24 min.) L-shaped lever contact types are avail- 18 (Rectangular: 24) able for 18-mm mounting centers, Connection except buzzers. (Rectangular types have 24-mm mounting centers.) Positive lock connectors and easy-lock connectors can be used on the tab terminals. To order L-shaped lever contact types, • Recommended Connectors specify “T” in place of “C” in the Type Positive-lock Connector Easy-lock Connector No. Item (Tyco Electronics) (Nichifu Co., Ltd.) 2 2 0.2 to 0.5 mm 175412-1 0.2 to 0.3 mm OSS-62852F3 Terminal 2 2 0.2 to 1.25 mm 174778-1 0.5 to 1.25 mm OSS-62815F3 (Standard contact type) (L-shaped lever contact type) Housing 174779-1 NET1-28-1P Example: LA1L-M1C14 LA1L-M1T14 ➁ ➁ Note: Positive-lock is a registered trademark of Tyco Electronics. Single Board Mounting • Minimum applicable load is 5V AC/DC,1 mA on gold contacts. Applicable range is subject to the operating condition and load. • Since the 2.8-mm-wide terminal touches the PC board as shown on the right, short circuit may occur with pattern lines. Design a circuit carefully to prevent short circuit. ±0.05 ±0.05 6.8 6.4 1.6 (PC Board) (0.5) (0.5) (0.5) NC Terminal Lamp Terminal (+) NO Terminal Lamp Terminal (–) COM Terminal Lamp Terminal (–) Standard Contacts Lamp Switch Switch Terminal Terminal Terminal Soldered Side Mounting Side 2C 1C L-shaped Lever Contacts Mounting PC board terminal control units on a PC board offers the PC Board Drilling Layout (Bottom View) following features. Features 10.7 • Reduced installation labor, easy wiring, space saving, and stan- 3.4 dardization. • Since the contact blocks on the PC board can be removed easily using a locking lever, the L6 series control units are easy to main- tain. • Because the L6 series control units require no studs for fastening ( ) ( ) 1.45 Note 1 1.45 Note 1 the control unit to a PC board, special preparation of the control 6.4 6.8 6.4 6.8 panel is not needed. Standard Contact L-shaped Lever Contact Notes for Designing PC board and Circuit Note 1: When designing, note the alignment of centerlines of the contact • Use 1.6-mm-thick glass epoxy PC board with drilled holes. blocks and centerlines of the operators. Note 2: The diameter of the terminal hole is 1.2 mm. • Design a circuit so that the L6 series control unit can operate within the rated voltage and current range. Make sure that inrush current and voltage do not exceed the rating. 26 (07/02/08) ş6 drilled hole for operation ş5 to ş6 drilled hole for operation +0.1 9-ø1.2 0 18 X2 X2 X1 X2 X2 X1 CN NO C CN NO C CNO NC CNO NC X2 X2 X1 X2 X2 X1 CN NO C CN NO C CNO NC CNO NC 17.8 15.8 X2 X2 X1 18 min. CN NO C CNO NC 5 5 1 1 (Note 1) 5 5 9 (0.8) (0.8) (0.8) 6 6 1.2 1 5.0 5.0 2.4 2.4 1 2.8 (Note 1) 5 5 2.8 2.8 10.7 R22 L6 Series Miniature Control Units ş16 Single Board Mounting Installation and Removal of Contact Switch Guard for Single Board Mounting Blocks Turn the locking lever to install and remove contact blocks on the SpeciŢcation: Rectangular type PC board using a screwdriver from a hole (standard contact ş6 mm, L-shaped lever contact ş5 mm to ş6 mm) in the PC board. The Degree of Protection: IP65 locking lever can be used for both standard contact types and L- Type No.: LA9Z-K3 shaped lever contact types but determine location of the control units so that the locking lever can be operated. Installation/Removal Holes Standard Contact L-shaped Lever Contact 32.6 ş6-mm hole ş5 to ş6-mm hole Panel Thickness 24 0.5 to 5 mm Hole diameter may vary to meet installation requirements. When 12.4 the locking lever can be accessed by using a screwdriver from the upper or right space, holes are not necessary. Note: The panel depth is the same for control units with or without switch guards. Both types can be installed on the same PC board. Upper Space Upper Space Right A B C A B Space L-shaped Lever Contact Standard Contact Mounting Holes and Assembly Procedure Drill mounting holes in the panel as shown below. When the units are mounted collectively, provide adequate clearance. +0.1 +0.1 ş16.0 0 ş16.0 0 +0.1 ø16.0 0 ±0.05 1.9 24 min. 18 min. (Rectangular: 24 min.) Standard Contact L-shaped Lever Contact Panel Cut-out for Positioning • Assembly Procedure 1. Install the operator to the panel. 2. Mount the contact block to the operator from the rear. 3. Turn the locking lever to lock the contact block. 4. Insert the PC board to terminals and solder. Note 1: Make sure that each terminal is inserted into the PC board correctly. Note 2: Do not apply tensile force to the connector cable for an extended period of time. Note 3: Do not expose the contact block to water. Note 4: Ensure to lock contact blocks when the contact blocks are installed on the operators. (07/02/08) 27 24 min. 18 min. ±0.05 14.8 23.5 13 11 33 Specifications and other descriptions in this catalog are subject to change without notice. 7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan Tel: +81-6-6398-2571, Fax: +81-6-6392-9731 E-mail: products@idec.co.jp IDEC IZUMI (H.K.) CO., LTD. IDEC CORPORATION (USA) IDEC ELEKTROTECHNIK GmbH 1175 Elko Drive, Sunnyvale, CA 94089-2209, USA Wendenstrasse 331, 20537 Hamburg, Germany Unit 1505-07, DCH Commercial Centre No. 25, Westlands Road, Quarry Bay, Hong Kong Tel: +1-408-747-0550 / (800) 262-IDEC (4332) Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24 E-mail: service@idec.de Tel: +852-2803-8989, Fax: +852-2565-0171 Fax: +1-408-744-9055 / (800) 635-6246 E-mail: opencontact@idec.com E-mail: info@hk.idec.com IDEC (SHANGHAI) CORPORATION Room 608-609, 6F, Gangtai Plaza, No. 700, IDEC TAIWAN CORPORATION IDEC CANADA LIMITED Unit 22-151, Brunel Road, Mississauga, Ontario, Yan'an East Road, Shanghai 200001, PRC 8F-1, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-Chih, Taipei County, Taiwan L4Z 1X3, Canada Tel: +86-21-5353-1000, Fax: +86-21-5353-1263 Tel: +1-905-890-8561, Toll Free: (888) 317-4332 E-mail: idec@cn.idec.com Tel: +886-2-2698-3929, Fax: +886-2-2698-3931 E-mail: service@tw.idec.com Fax: +1-905-890-8562 IDEC (BEIJING) CORPORATION E-mail: sales@ca.idec.com Room 211B, Tower B, The Grand Pacific Building, IDEC IZUMI ASIA PTE. LTD. No. 31, Tannery Lane #05-01, Dragon Land IDEC AUSTRALIA PTY. LTD. 8A Guanghua Road, Chaoyang District, Beijing 100026, PRC Building, Singapore 347788 2/3 Macro Court, Rowville, Victoria 3178, Australia Tel: +61-3-9763-3244, Toll Free: 1800-68-4332 Tel: +86-10-6581-6131, Fax: +86-10-6581-5119 Tel: +65-6746-1155, Fax: +65-6844-5995 E-mail: info@sg.idec.com Fax: +61-3-9763-3255 IDEC (SHENZHEN) CORPORATION E-mail: sales@au.idec.com Unit AB-3B2, Tian Xiang Building, Tian’an Cyber Park, IDEC ELECTRONICS LIMITED Fu Tian District, Shenzhen, Guang Dong 518040, PRC Unit 2, Beechwood, Chineham Business Park, Tel: +86-755-8356-2977, Fax: +86-755-8356-2944 Basingstoke, Hampshire RG24 8WA, UK Tel: +44-1256-321000, Fax: +44-1256-327755 www.idec.com E-mail: sales@uk.idec.com Cat. No. EP1154-0 FEBRUARY 2007 11.8DNP PRINTED IN JAPAN (07/02/08)