MULTIFUNCTION OPTOELECTRONIC SENSORS Complete range of optic functions, basic, advanced and • laser class 1 Models with coaxial optics for polarised retroreflex, • contrast and luminescence sensors TM Trimmer or EASYtouch setting with Remote, Keylock • and Delay functions Standard cable or M12 connection with standard NPN or • PNP configuration S60 SERIES standard 50x50x15 The S60 series, standard 50x50x15 mm compact housing, offers all the most advanced optic functions, as well as the universal, available with safety class 1 laser emission. The series presents a complete range of models, including retroreflex with coaxial optics and polarisation filters for the detection of shiny and/or transparent objects, background and foreground suppression, contrast sensors with white light emission for the detection of coloured marks, the sensor with UV emission for the detection of luminescence references and the distance sensor with analogue output. The basic models for presence detection present trimmer sensitivity adjustment, while the models with the advanced optics are microprocessor controlled and have the patent-covered EASYtouch™ setting, which gives rapid and precise setting of the switching threshold, with the possibility of remote control, keyboard block and selection of the output delay function. The S60 series offers versions with cable or M12 connection that can be rotated for either straight or right-angle positions. All versions have NPN or PNP output and standard configuration conforming to the EN 60947-5-2 standard. UNIVERSAL COMPACT SENSORS G/F THROUGH BEAM WITH INFRARED EMISSION The detection system with two DIMENSIONS separate emitter and receiver units allows the user to reach larger operating distances. The trimmer, present on the receiver, allows to A adjust sensitivity and to detect objects that obscure, even partially, the light emission. The IR emission is modulated to avoid interference with other light sources and can be turned off to test the functioning even without the object to detect. C C D EMITTER RECEIVER Output status and A INDICATORS AND SETTINGS stability LEDs (receiver); power on LED (emitter) B Adjustment trimmer (receiver) B A M12 connector output C Cable output D A Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue EMITTER BROWN Vdc TEST + + 10 ... 30 Vdc WHITE (WHITE) (BROWN) BLACK 0V - TEST + (BLUE) (BLACK) BLUE RECEIVER BROWN Vdc NC OUTPUT + 10 ... 30 Vdc (BROWN) WHITE (WHITE) NC OUTPUT BLACK 0V - NO OUTPUT NO OUTPUT (BLUE) (BLACK) BLUE 2 20 m TECHNICAL DATA SELECTION TABLE receiver - 2 m cable S60-PA-2-F01-NN 956201490 NPN S60-PA-2-F01-PP 956201330 PNP emitter - 2 m cable S60-PA-2-G00-XG 956201340 Operating distance: 0 ... 20 m receiver - M12 connector 1 Power supply: 10 ... 30 Vdc S60-PA-5-F01-NN 956201210 NPN Ripple: ≤ 2 Vpp S60-PA-5-F01-PP 956201060 PNP Consumption: ≤ 35 mA 2 Light emission: infrared LED 880 nm emitter - M12 connector Spot dimension: aprox. 200 mm at 4 m S60-PA-5-G00-XG 956201070 3 Setting: sensitivity trimmer All the ordering codes and information are Indicators: summarised in the last pages of this catalogue yellow OUTPUT LED green STABILITY LED green POWER ON LED Output type: PNP, NO and NC NPN, NO and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 1 ms Switching frequency: 500 Hz Operating mode: dark on NO / light on NC 4 Auxiliary functions: Test + and Test - Connection: TECHNICAL NOTES 5 2 m Ø 4 mm cable 1 6 Limit values M12 4-pole connector Electrical protection: class 2 2 Average life of 100.000 h with T = +25 °C A Mechanical protection: IP67 3 270 ° trimmer 7 Protection devices: A, B 4 Emitter off with Test+ on Vdc and Test- on 0 V Housing material: ABS 8 2 5 Lens material: window in PMMA PVC, 4 x 0.14 mm Weight: 6 Connector can be blocked on two positions 90 g max. 7 A - reverse polarity protection 40 g max. B - overload and short-circuit protection on Operating temperature: -25 ... +55°C receiver outputs Storage temperature: -25 ... +70°C Reference standard: EN 60947-5-2 8 Internal lenses in Polycarbonate DETECTION DIAGRAMS 18 20 0 5 10 20 (m) 15 Recommended operating distance Maximum operating distance Excess gain Detection area 3 S60-PA-2-F01-NN S60-PA-2-F01-PP S60-PA-2-G00-XG S60-PA-5-F01-NN S60-PA-5-F01-PP S60-PA-5-G00-XG L-G/F THROUGH BEAM WITH RED LASER EMISSION The high operating distance, typical DIMENSIONS of the emitter and receiver system, is notably increased thanks to the use of visible red laser emission. The laser beam can be easily A aligned and offers excellent detection resolution of even small objects. The class 1 laser emission, according to EN 60825-1, guarantees maximum safety for the operators in all applications. C C D EMITTER RECEIVER Output status and A INDICATORS AND SETTINGS stability LEDs (receiver); power on LED (emitter) B Adjustment trimmer B A (receiver) M12 connector output C Cable output D A Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. Decrease sensitivity to increase resolution. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue EMITTER BROWN Vdc TEST + + 10 ... 30 Vdc WHITE (WHITE) (BROWN) BLACK 0V - NOT USED NOT USED (BLUE) (BLACK) BLUE RECEIVER BROWN Vdc NC OUTPUT + 10 ... 30 Vdc WHITE (BROWN) (WHITE) NC OUTPUT BLACK 0V - NO OUTPUT NO OUTPUT (BLUE) (BLACK) BLUE 4 60 m TECHNICAL DATA SELECTION TABLE receiver - 2 m cable S60-PL-2-F01-NN 956201570 NPN S60-PL-2-F01-PP 956201420 PNP emitter - 2 m cable S60-PL-2-G00-XG 956201430 Operating distance: 0 ... 60 m receiver - M12 connector 1 Power supply: 10 ... 30 Vdc S60-PL-5-F01-NN 956201270 NPN Ripple: ≤ 2 Vpp S60-PL-5-F01-PP 956201140 PNP Consumption: ≤ 35 mA 2 Light emission: red Laser 650 nm emitter - M12 connector class 1 EN 60825-1 S60-PL-5-G00-XG 956201150 class II CDRH21 CFR 1040.10 All the ordering codes and information are Resolution: summarised in the last pages of this catalogue aprox. 6 mm a 0.5 m aprox.10 mm over 2 m 3 Setting: sensitivity trimmer Indicators: yellow OUTPUT LED green POWER ON LED Output type: PNP, NA and NC NPN, NA and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 333 µs Switching frequency: 1.5 kHz Operating mode: dark on NO / light on NC 4 Auxiliary functions: Test + TECHNICAL NOTES Connection: 5 2 m Ø 4 mm cable 1 Limit values 6 M12 4-pole connector 2 Average life of 50.000 h with T = +25 °C A Electrical protection: class 2 3 270° trimmer Mechanical protection: IP67 7 4 Protection devices: A, B Emitter off with Test+ connected to +Vdc Housing material: ABS Emitter on with Test+ not connected or 8 Lens material: window in PMMA connected to 0V Weight: 2 5 PVC, 4 x 0.14 mm 90 g max. 6 Connector can be blocked on two positions 40 g max. 7 A - reverse polarity protection Operating temperature: -10 ... +50°C B - overload and short-circuit protection on Storage temperature: -25 ... +70°C Reference standard: EN 60947-5-2, receiver outputs EN 60825-1, CDRH21 CFR 1040.10 8 Internal lenses in glass and Polycarbonate DETECTION DIAGRAMS 60 0 15 30 45 60 (m) Operating distance Detection area Resolution 5 S60-PL-2-F01-NN S60-PL-2-F01-PP S60-PL-2-G00-XG S50-PL-5-F01-NN S50-PL-5-F01-PP S50-PL-5-G00-XG B POLARISED RETROREFLEX WITH RED EMISSION With retroreflex sensors the object DIMENSIONS is detected when it interrupts the light beam generated between the sensor and its associated prismatic reflector. High-polarisation optic filters also allow reliable detection A of very reflective objects, such as mirrored surfaces that, differently from the prismatic reflector, reflect the light beam without rotating the polarisation plane. C C D Output status and A INDICATORS AND SETTINGS stability LEDs Adjustment trimmer B B M12 connector output C A Cable output D Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Reflectors (A.01), Connectors S60-PA-2 S60-PA-5 (A.03) and Fixing Brackets (A.04) of the General Catalogue BROWN Vdc NC OUTPUT + 10 ... 30 Vdc (BROWN) (WHITE) WHITE NC OUTPUT 0V - NO OUTPUT BLACK (BLUE) NO OUTPUT (BLACK) BLUE 6 3 m 8 m TECHNICAL DATA SELECTION TABLE axial optics - 2 m cable S60-PA-2-B01-NN 956201460 NPN S60-PA-2-B01-PP 956201300 PNP axial optics - M12 connector S60-PA-5-B01-NN 956201180 NPN S60-PA-5-B01-PP 956201040 PNP Operating distance: 0.1 ... 8 m (on R5) 1 Power supply: 10 ... 30 Vdc All the ordering codes and information are Ripple: ≤ 2 Vpp summarised in the last pages of this catalogue Consumption: ≤ 40 mA 2 Light emission: red LED 660 nm Spot dimension: aprox. 90 mm at 3 m 3 Setting: sensitivity trimmer Indicators: yellow OUTPUT LED green STABILITY LED Output type: PNP, NO and NC NPN, NO and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs Switching frequency: 1 kHz Operating mode: dark on NO / light on NC Connection: 4 2 m Ø 4 mm cable 5 TECHNICAL NOTES M12 4-pole connector Electrical protection: class 2 1 Limit values Mechanical protection: IP67 2 Average life of 100.000 h with T = +25 °C 6 A Protection devices: A, B 3 Housing material: ABS 270° trimmer 7 Lens material: window in PMMA 2 4 PVC, 4 x 0.14 mm Weight: 5 Connector can be blocked on two positions 90 g max. 6 A - reverse polarity protection 40 g max. B - overload and short-circuit protection on Operating temperature: -25 ... +55°C Storage temperature: -25 ... +70°C outputs Reference standard: EN 60947-5-2 7 Internal lenses in Polycarbonate DETECTION DIAGRAMS 7 8 R5 R2 6 6,5 R5 R2 0 2 4 6 8 10 (m) R5 Recommended operating distance Maximum operating distance R2 High efficiency reflectors can be used to obtain larger operating distances. Refer to Reflectors (A.01) of the General Catalogue Excess gain Detection area 7 S60-PA-2-B01-NN S60-PA-2-B01-PP S60-PA-5-B01-NN S60-PA-5-B01-PP L-B RETROREFLEX WITH RED LASER EMISSION The visible red laser emission DIMENSIONS increases the operating distance and resolution of the polarised retroreflex sensor. Specific R7 or R8 reflectors with 0.8 mm micro- A prisms are available for high- resolution detection of small objects. The class 1 laser emission, according to EN 60825-1, guarantees maximum safety for the operators in all applications. C C D Output status and A INDICATORS AND SETTINGS power on LEDs Adjustment trimmer B B M12 connector output C A Cable output D Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. Decrease sensitivity to increase resolution. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Reflectors (A.01), Connectors S60-PA-2 S60-PA-5 (A.03) and Fixing Brackets (A.04) of the General Catalogue BROWN Vdc + 10 ... 30 Vdc NC OUTPUT (BROWN) (WHITE) WHITE NC OUTPUT 0V - NO OUTPUT BLACK (BLUE) NO OUTPUT (BLACK) BLUE 8 20 m SELECTION TABLE TECHNICAL DATA axial optics - 2 m cable S60-PL-2-B01-NN 956201560 NPN S60-PL-2-B01-PP 956201410 PNP axial optics - M12 connector S60-PL-5-B01-NN 956201260 NPN S60-PL-5-B01-PP 956201120 PNP Operating distance: 0.1 ... 20 m 1 All the ordering codes and information are Power supply: 10 ... 30 Vdc summarised in the last pages of this catalogue Ripple: ≤ 2 Vpp Consumption: ≤ 35 mA 2 Light emission: red Laser 650 nm class 1 EN 60825-1 class II CDRH21 CFR 1040.10 Resolution: approx. 10 mm 3 Setting: sensitivity trimmer Indicators: yellow OUTPUT LED green POWER ON LED Output type: PNP, NO and NC NPN, NO and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 250 µs Switching frequency: 2 kHz Operating mode: dark on NO / light on NC Connection: 4 2 m Ø 4 mm cable 5 M12 4-pole connector TECHNICAL NOTES Electrical protection: class 2 Mechanical protection: IP67 1 Limit values 6 Protection devices: A, B 2 Average life of 50.000 h with T = +25 °C Housing material: ABS A 7 Lens material: window in PMMA 3 270° trimmer Weight: 2 4 PVC, 4 x 0.14 mm 90 g max. 5 Connector can be blocked on two positions 40 g max. 6 A - reverse polarity protection Operating temperature: -10 ... +50°C B - overload and short-circuit protection on Storage temperature: -25 ... +70°C outputs Standard reference: EN 60947-5-2, EN 60825-1, CDRH21 CFR 1040.10 7 Internal lenses in glass and Polycarbonate DETECTION DIAGRAMS R2 20 R7 15 R2 20 (m) 0 5 10 15 R7 Operating distance High efficienct reflectors can be used to obtain larger operating distances. Refer to Reflectors (A.01) of the General Catalogue Detection area Resolution on R7 reflector 9 S60-PL-2-B01-NN S60-PL-2-B01-PP S60-PL-5-B01-NN S60-PL-5-B01-PP COAXIAL POLARISED RETROREFLEX WITH RED EMISSION B The polarised retroreflex sensor DIMENSIONS with a coaxial optics offers the best resolution of the detection point as the optic emitting axis coincides with the optic receiving axis. The A coaxial system also allows to reduce drastically the sensor’s blind zone and consents the detection of objects very close to the sensor’s frontal lens. C C D Output status and A INDICATORS AND SETTINGS stability LEDs Adjustment trimmer B B M12 connector output C A Cable output D Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Reflectors (A.01), Connectors S60-PA-2 S60-PA-5 (A.03) and Fixing Brackets (A.04) of the General Catalogue BROWN Vdc NC OUTPUT + 10 ... 30 Vdc (BROWN) WHITE (WHITE) NC OUTPUT 0V - BLACK NO OUTPUT NO OUTPUT (BLUE) (BLACK) BLUE 10 4 m TECHNICAL DATA SELECTION TABLE coaxial optics - 2 m cable S60-PA-2-B51-NN 956201610 NPN S60-PA-2-B51-PP 956201600 PNP coaxial optics - M12 connector S60-PA-5-B51-NN 956201630 NPN S60-PA-5-B51-PP 956201620 PNP Operating distance: 0 ... 4 m 1 All the ordering codes and information are Power supply: 10 ... 30 Vdc Ripple: ≤ 2 Vpp summarised in the last pages of this catalogue Consumption: ≤ 40 mA 2 Light emission: red LED 660 nm Spot dimension: aprox. 50 mm at 1.5 m 3 Setting: sensitivity trimmer Indicators: yellow OUTPUT LED green STABILITY LED Output type: PNP, NO and NC NPN, NO and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs Switching frequency: 1 kHz Operating mode: dark on NO / light on NC Connection: 4 2 m Ø 4 mm cable 5 TECHNICAL NOTES M12 4-pole connector Electrical protection: class 2 1 Limite values Mechanical protection: IP67 2 6 Average life of 100.000 h with T = +25 °C Protection devices: A, B A 3 Housing material: ABS 270° trimmer 7 Lens material: window in glass (tilted anti-reflection) 2 4 PVC, 4 x 0.14 mm Weight: 5 Connector can be blocked on two positions 90 g max. 6 40 g max. A - reverse polarity protection Operating temperature: -25 ... +55°C B - overload and short-circuit protection on Storage temperature: -25 ... +70°C outputs Reference standard: EN 60947-5-2 7 Internal lenses in glass DETECTION DIAGRAMS R5 4 4,2 R2 3 3,2 R5 5 (m) R2 0 1 2 3 4 Recommended operating distance R5 Maximum operating distance R2 High efficienct reflectors can be used to obtain larger operating distances. Refer to Reflectors (A.01) of the General Catalogue Excess gain Detection area 11 S60-PA-2-B51-NN S60-PA-2-B51-PP S60-PA-5-B51-NN S60-PA-5-B51-PP T COAXIAL POLARISED RETROREFLEX FOR TRANSPARENTS The high sensitivity and reduced DIMENSIONS hysterisis of this retroreflex sensor allow to detect even the slightest attenuation of the received light emission, caused by the presence of transparent objects, such as A glass or PET bottles or plastic film sheets for packaging. The presence of polarisation filters avoids false switching on shiny surfaces and the coaxial optics improves the detection precision on the entire operating range. C C D Output status LED A INDICATORS AND SETTINGS Adjustment trimmer B B M12 connector output C A Cable output D Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Reflectors (A.01), Connectors S60-PA-2 S60-PA-5 (A.03) and Fixing Brackets (A.04) of the General Catalogue BROWN Vdc NC OUTPUT + 10 ... 30 Vdc WHITE (BROWN) (WHITE) NC OUTPUT BLACK 0V - NO OUTPUT NO OUTPUT (BLUE) (BLACK) BLUE 12 2 m TECHNICAL DATA SELECTION TABLE coaxial optics - 2 m cable S60-PA-2-T51-NN 956201530 NPN S60-PA-2-T51-PP 956201380 PNP coaxial optics - M12 connector S60-PA-5-T51-NN 956201250 NPN S60-PA-5-T51-PP 956201100 PNP Operating distance: 0 ... 2 m 1 All the ordering codes and information are Power supply: 10 ... 30 Vdc Ripple: ≤ 2 Vpp summarised in the last pages of this catalogue Consumption: ≤ 40 mA 2 Light emission: red LED 660 nm Spot dimension: aprox. 50 mm at 1.5 m 3 Setting: sensitivity trimmer Indicators: yellow OUTPUT LED Output type: PNP, NO and NC NPN, NO and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs Switching frequency: 1 kHz Operating mode: dark on NO / light on NC Connection: 4 2 m Ø 4 mm cable TECHNICAL NOTES 5 M12 4-pole connector 1 Limit values Electrical protection: class 2 Mechanical protection: IP67 2 Average life of 100.000 h with T = +25 °C A 6 Protection devices: A, B 3 270° trimmer Housing material: ABS 7 2 Lens materiale: window in glass (tilted anti-reflection) 4 PVC, 4 x 0.14 mm Weight: 5 Connector can be blocked on two positions 90 g max. 6 A - reverse polarity protection 40 g max. B - overload and short-circuit protection on Operating temperature: -25 ... +55°C outputs Storage temperature: -25 ... +70°C Reference standard: EN 60947-5-2 7 Internal lenses in glass DETECTION DIAGRAMS R5 1,7 2 R2 1,5 1,7 R5 R5 1,4 0 0,5 1 1,5 2 (m) R2 Recommended operating distance R2 Maximum operating distance Excess gain Detection area 13 S60-PA-2-T51-NN S60-PA-2-T51-PP S60-PA-5-T51-NN S60-PA-5-T51-PP C DIFFUSE PROXIMITY This diffuse proximity sensor DIMENSIONS represents a reliable, simple and cost-effective solution for the direct detection of any object within the can be set operating distance, that A using the sensitivity adjustment trimmer. . The visible red emission facilitates the alignment of the sensor or of the object to detect and in particular in short operating distances. C C D Output status LED A INDICATORS AND SETTINGS Adjustment trimmer B B M12 connector output C A Cable output D Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN Vdc NC OUTPUT + 10 ... 30 Vdc (BROWN) (WHITE) WHITE NC OUTPUT 0V - NO OUTPUT BLACK (BLUE) NO OUTPUT (BLACK) BLUE 14 100 cm TECHNICAL DATA SELECTION TABLE axial optics - 2 m cable S60-PA-2-C01-NN 956201470 NPN S60-PA-2-C01-PP 956201310 PNP axial optics - M12 connector S60-PA-5-C01-NN 956201190 NPN S60-PA-5-C01-PP 956201050 PNP Operating distance: 0 ... 100 cm 1 Power supply: 10 ... 30 Vdc All the ordering codes and information are Ripple: ≤ 2 Vpp summarised in the last pages of this catalogue Consumption: ≤ 40 mA 2 Light emission: red LED 660 nm Spot dimension: approx. 50 mm at 90 cm 3 Setting: sensitivity trimmer Indicators: yellow OUTPUT LED green STABILITY LED Output type: PNP, NO and NC NPN, NO and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs Switching frequency: 1 kHz Operating mode: light on NO / dark on NC Connection: 4 2 m Ø 4 mm cable TECHNICAL NOTES 5 M12 4-pole connector 1 Electrical protection: class 2 Limite values Mechanical protection: IP67 2 Average life of 100.000 h with T = +25 °C A 6 Protection devices: A, B 3 270° trimmer Housing material: ABS 7 2 4 Lens material: window in PMMA PVC, 4 x 0.14 mm Weight: 5 Connector can be blocked on two positions 90 g max. 6 A - reverse polarity protection 40 g max. B - overload and short-circuit protection on Operating temperature: -25 ... +55°C outputs Storage temperature: -25 ... +70°C 7 Reference standard: EN 60947-5-2 Internal lenses in Polycarbonate DETECTION DIAGRAMS White 100 110 Grey 70 80 White 90% Grey 18% Grey 18% 1,4 0 30 60 90 120 (cm) White 90% Recommended operating distance Maximum operating distance Excess gain Detection area 15 S60-PA-2-C01-NN S60-PA-2-C01-PP S60-PA-5-C01-NN S60-PA-5-C01-PP C LONG DIFFUSE PROXIMITY This version of diffuse proximity DIMENSIONS sensor offers the maximum operating distance for the direct detection of objects, without the use of separate reflectors or A receivers. The detection distance can be set using the sensitivity adjustment trimmer. The green stability LED indicates that the received signal is higher than the minimum signal for stable output switching. C C D Output status and A INDICATORS AND SETTINGS stability LEDs Adjustment trimmer B B M12 connector output C A Cable output D Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. CONNECTIONS ACCESSORIES For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN Vdc NC OUTPUT + 10 ... 30 Vdc (BROWN) WHITE (WHITE) NC OUTPUT 0V - BLACK NO OUTPUT NO OUTPUT (BLUE) (BLACK) BLUE 16 200 cm TECHNICAL DATA SELECTION TABLE axial optics - 2 m cable S60-PA-2-C11-NN 956201480 NPN S60-PA-2-C11-PP 956201320 PNP axial optics -M12 connector S60-PA-5-C11-NN 956201200 NPN S60-PA-5-C11-PP 956201110 PNP Operating distance: 5 ... 200 cm 1 All the ordering codes and information are Power supply: 10 ... 30 Vdc Ripple: ≤ 2 Vpp summarised in the last pages of this catalogue Consumption: ≤ 40 mA 2 Light emission: infrared LED 880 nm Spot dimension: approx. 250 mm at 1 m 3 Setting: sensitivity trimmer Indicators: yellow OUTPUT LED green STABILITY LED Output type: PNP, NO and NC NPN, NO and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs Switching frequency: 1 kHz Operating mode: light on NO / dark on NC Connection: 4 2 m Ø 4 mm cable TECHNICAL NOTES 5 M12 4-pole connector 1 Electrical protection: class 2 Limite values Mechanical protection: IP67 2 Average life of 100.000 h with T = +25 °C A 6 Protection devices: A, B 3 270° trimmer Housing material: ABS 7 2 4 Lens material: window in PMMA PVC, 4 x 0.14 mm Weight: 5 Connector can be blocked on two positions 90 g max. 6 A - reverse polarity protection 40 g max. B - overload and short-circuit protection on Operating temperature: -25 ... +55°C outputs Storage temperature: -25 ... +70°C 7 Reference standard: EN 60947-5-2 Internal lenses in Polycarbonate DETECTION DIAGRAMS White 200 220 Grey 18% Grey 120 140 White 90% Grey 18% 1,4 0 50 100 150 200 250 (cm) White 90% Recommended operating distance Maximum operating distance Excess gain Detection area 17 S60-PA-2-C11-NN S60-PA-2-C11-PP S60-PA-5-C11-NN S60-PA-5-C11-PP L-C PROXIMITY WITH RED LASER EMSSION The visible red laser emission DIMENSIONS allows the accurate detection of very small objects. The sensors operate as a proximity device up to 60 cm and can be used as a A contrast sensor for high contrast mark detection. The class 1 laser emission, according to EN 60825-1, guarantees maximum safety for the operators in all applications. C C D Output status and A INDICATORS AND SETTINGS power on LEDs Adjustment trimmer B B M12 connector output C A Cable output D Single-turn trimmer for sensitivity adjustment. Rotate clockwise to increase the operating distance. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN NC OUTPUT + 10 ... 30 Vdc Vdc (BROWN) (WHITE) WHITE NC OUTPUT 0V - NO OUTPUT BLACK (BLUE) (BLACK) NO OUTPUT BLUE 18 60 cm TECHNICAL DATA SELECTION TABLE axial optics - 2 m cable S60-PL-2-C01-NN 956201640 NPN S60-PL-2-C01-PP 956201650 PNP axial optics - M12 connector S60-PL-5-C01-NN 956201660 NPN S60-PL-5-C01-PP 956201670 PNP Operating distance: 0 ... 60 cm 1 Power supply: 10 ... 30 Vdc All the ordering codes and information are Ripple: ≤ 2 Vpp summarised in the last pages of this catalogue Consumption: ≤ 35 mA 2 Light emission: red Laser 650 nm class 1 EN 60825-1 class II CDRH21 CFR 1040.10 Resolution: approx. 0.2 mm at 15 cm approx. 1 mm at 35 cm approx. 2 mm at 50 cm 3 Setting: sensitivity trimmer Indicators: yellow OUTPUT LED green POWER ON LED Output type: PNP, NO and NC NPN, NO and NC Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 250 µs Switching frequency: 2 kHz Operating mode: light on NO / dark on NC Connection: 4 2 m Ø 4 mm cable 5 M12 4-pole connector Electrical protection: class 2 TECHNICAL NOTES Mechanical protection: IP67 1 Limit values 6 Protection devices: A, B 2 Average life of 50.000 h with T = +25 °C Housing material: ABS A 7 Lens material: window in PMMA 3 270° trimmer Weight: 2 4 PVC, 4 x 0.14 mm 90 g max. 5 Connector can be blocked on two positions 40 g max. 6 Operating temperature: -10 ... +50°C A - reverse polarity protection Storage temperature: -25 ... +70°C B - overload and short-circuit protection on Reference standard: EN 60947-5-2, EN 60825-1, outputs CDRH21 CFR 1040.10 7 Internal lenses in glass and Polycarbonate DETECTION DIAGRAMS 60 0 20 40 60 (cm) Grey 18% White 90% Operating distance Detection area Resolution 19 S60-PL-2-C01-NN S60-PL-2-C01-PP S60-PL-5-C01-NN S60-PL-5-C01-PP M BACKGROUND SUPPRESSION WITH RED EMISSION Background suppression proximity DIMENSIONS allows to precisely adjust the distance over which the object is not detected, with the minimum difference between different A TM coloured objects. The EASYtouch setting procedure fixes automatically the best detection conditions with medium or high precision, simply pressing once the teach-in push-button, in presence of the background to suppress. C C D Output status and A INDICATORS AND SETTINGS READY/ERROR LEDs Teach-in push-button B A M12 connector output B C Cable output D Teach-in button for setting. EASYtouch™ provides two setting modes: standard or fine. Please refer to instructions manual for operating details. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN Vdc REMOTE + 10 ... 30 Vdc (BROWN) (WHITE) WHITE REMOTE REMOTE 0V - NO OUTPUT BLACK (BLUE) (BLACK) NO OUTPUT BLUE 20 20 cm SELECTION TABLE TECHNICAL DATA axial optics - 2 m cable S60-PA-2-M08-NH 956201500 NPN S60-PA-2-M08-PH 956201350 PNP axial optics - M12 connector S60-PA-5-M08-NH 956201220 NPN S60-PA-5-M08-PH 956201080 PNP Operating distance: 7 ... 20 cm 1 All the ordering codes and information are Power supply: 10 ... 30 Vdc summarised in the last pages of this catalogue Ripple: ≤ 2 Vpp Consumption: ≤ 30 mA 2 Light emission: red LED 670 nm Spot dimension: approx. 16 mm at 20 cm Setting: teach-in push-button 3 remote on cable Setting procedure: EASYtouch™ Indicators: yellow OUTPUT LED green / red READY / ERROR LED Output type: PNP, NO NPN, NO Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs Max. switching frequency: 1 kHz Operating mode: light with EASYtouch™ dark / light configurable Timing function: 20 ms minimum output ON Auxiliary functions: remote 4 keylock Connection: 5 2 m Ø 4 mm cable 6 TECHNICAL NOTES M12 4-pole connection Electrical protection: class 2 1 Limit values Mechanical protection: IP67 2 7 Average life of 100.000 h with T = +25 °C Protection devices: A, B A 3 Housing material: ABS Connect to 0 V when remote wire not used 8 Lens material: window in PMMA 4 Active with remote at +Vdc at power on Weight: 2 5 PVC, 4 x 0.14 mm 90 g max. 6 Connector can be blocked on two positions 40 g max. 7 Operating temperature: -25 ... +55°C A - reverse polarity protection Storage temperature: -25 ... +70°C B - overload and short-circuit protection Reference standard: EN 60947-5-2 8 Internal lenses in Polycarbonate II3D DETECTION DIAGRAMS 20 White 90% / 10 Grey 18% 0 5 10 15 20 (cm) White 90% / 8 Black 6% Operating distance 6 4 2 mm 0 70 120 170 220 Setting distance on white 90% background Detection difference with EASYtouch™ acquisition 21 S60-PA-2-M08-NH S60-PA-2-M08-PH S60-PA-5-M08-NH S60-PA-5-M08-PH % difference object distance L-M BACKGROUND SUPPRESSION WITH RED LASER EMISSION The background suppression with DIMENSIONS red laser emission offers the best precision in terms of resolution and for background suppression, over which the object is not detected. The class 1 laser emission, A according to EN 60825-1, guarantees maximum safety for the operators in all applications. C C D Output status and LASER A INDICATORS AND SETTINGS ON/ERROR LEDs Teach-in push-button B A B M12 connector output C Cable output D Teach-in button for setting. EASYtouch™ provides two setting modes: standard or fine. Please refer to instructions manual for operating details. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN REMOTE + 10 ... 30 Vdc Vdc (BROWN) (WHITE) WHITE REMOTE 0V - NO OUTPUT BLACK (BLUE) (BLACK) NO OUTPUT BLUE 22 10 cm TECHNICAL DATA SELECTION TABLE axial optics - 2 m cable S60-PL-2-M08-NH 956201580 NPN S60-PL-2-M08-PH 956201440 PNP axial optics - M12 connector S60-PL-5-M08-NH 956201280 NPN S60-PL-5-M08-PH 956201160 PNP Operating distance: 5 ... 10 cm 1 Power supply: 10 ... 30 Vdc All the ordering codes and information are Ripple: ≤ 2 Vpp summarised in the last pages of this catalogue Consumption: ≤ 60 mA 2 Light emissione: red Laser 650 nm class 1 EN 60825-1 class II CDRH21 CFR 1040.10 Resolution: approx. 0.5 mm at 6 cm Setting: teach-in push-button 3 remote on cable Setting procedure: EASYtouch™ Indicators: yellow OUTPUT LED green / red LASER ON / ERROR LED Output type: PNP, NO NPN, NO Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs Switching frequency: 1 kHz Operating mode: light with EASYtouch™ dark / light configurable Timing function: 20 ms minimum output ON Auxiliary functions: remote 4 keylock Connection: 5 2 m Ø 4 mm cable 6 M12 4-pole connector TECHNICAL NOTES Electrical protection: class 2 Mechanical protection: IP67 1 Limit values 7 Protection devices: A, B 2 Average life of 50.000 h with T = +25 °C Housing material: ABS A 8 3 Lens material: window in PMMA Connect to 0 V when remote wire not used Weight: 4 Active with remote at +Vdc at power on 90 g max. 2 5 PVC, 4 x 0.14 mm 40 g max. 6 Connector can be blocked on two positions Operating temperature: -10 ... +50°C 7 Storage temperature: -25 ... +70°C A - reverse polarity protection B - overload and short-circuit protection Reference standard: EN 60947-5-2, 8 EN 60825-1, CDRH21 CFR 1040.10 Internal lenses in glass and Polycarbonate II3D DETECTION DIAGRAMS 10 0 2 4 6 8 10 (cm) White 90% / Operating distance Black 6% White 90% / Grey 18% Setting distance on white 90% background Detection difference with EASYtouch™ acquisition 23 S60-PL-2-M08-NN S60-PL-2-M08-PP S60-PL-5-M08-NN S60-PL-5-M08-PP % difference object distance N FORE-BACKGROUND SUPPRESSION WITH RED EMISSION The forground and background DIMENSIONS suppression proximity allows to precisely adjust the minimum and maximum detection distance. TM The EASYtouch setting procedure A fixes automatically the best detection conditions with medium or high precision, simply pressing once the teach-in push-button. C C D Output status and A INDICATORS AND SETTINGS READY/ERROR LEDs Teach-in push-button B A M12 connector output B C Cable output D Teach-in button for setting. EASYtouch™ provides two setting modes: standard or fine. Please refer to instructions manual for operating details. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN Vdc REMOTE + 10 ... 30 Vdc WHITE (BROWN) (WHITE) REMOTE BLACK 0V - NO OUTPUT NO OUTPUT (BLUE) (BLACK) BLUE 24 20 cm TECHNICAL DATA SELECTION TABLE axial optics - 2 m cable S60-PA-2-N03-NH 956201520 NPN S60-PA-2-N03-PH 956201370 PNP axial optics - M12 connector S60-PA-5-N03-NH 956201240 NPN S60-PA-5-N03-PH 956201090 PNP Operating distance: 7 ... 20 cm 1 Power supply: 10 ... 30 Vdc All the ordering codes and information are Ripple: ≤ 2 Vpp summarised in the last pages of this catalogue Consumption: ≤ 50 mA 2 Light emission: red LED 670 nm Spot dimension: approx. 16 mm at 20 cm Setting: teach-in push-button 3 remote on cable Setting procedure: EASYtouch™ Indicators: yellow OUTPUT LED green / red READY / ERROR LED Output type: PNP, NO NPN, NO Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs Max. switching frequency: 1 kHz Operating mode: light with EASYtouch™ dark / light configurable Auxiliary functions: remote 4 keylock Connection: 5 2 m Ø 4 mm cable 6 TECHNICAL NOTES M12 4-pole connector Electrical protection: class 2 1 Limit values Mechanical protection: IP67 2 7 Average life of 100.000 h with T = +25 °C A Protection devices: A, B 3 Connect to 0 V when remote wire not used Housing material: ABS 8 4 Lens material: window in PMMA Active with remote at +Vdc at power on Weight: 2 5 PVC, 4 x 0.14 mm 90 g max. 6 Connector can be blocked on two positions 40 g max. 7 Operating temperature: -25 ... +55 C A - reverse polarity protection B - overload and short-circuit protection Storage temperature: -25 ... +70 C 8 Reference standard: EN 60947-5-2 Internal lenses in Polycarbonate DETECTION DIAGRAMS 20 mm 20 (cm) 0 5 10 15 Operating distance mm Distance Detection difference Note: in the acquisition mode, the fore-background suppression points are programmable 25 Foreground suppression area Detection area Background suppression area S60-PA-2-N03-NH S60-PA-2-N03-PH S60-PA-5-N03-NH S60-PA-5-N03-PH Distance W CONTRAST SENSOR WITH WHITE EMISSION The white light LED emission is DIMENSIONS designed for the detection of a large number of coloured or grey- scale contrasts, in order to detect print registration marks or similar. A TM The patent-covered EASYtouch setting procedures automatically selects the best detection conditions, simply by pressing the teach-in push-button once. A higher level of accuracy can be obtained or the dark/light operating C mode can be inverted. A C D INDICATORS AND SETTINGS A B Output status and A READY/ERROR LEDs Teach-in push-button B M12 connector output C orientable in two positions Cable output D Teach-in button for setting. EASYtouch™ provides two setting modes: standard or fine. Please refer to instructions manual for operating details. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN Vdc REMOTE + 10 ... 30 Vdc (BROWN) (WHITE) WHITE REMOTE REMOTE 0V - NO OUTPUT BLACK (BLUE) (BLACK) NO OUTPUT BLUE 26 19 mm SELECTION TABLE TECHNICAL DATA contrast sensor - 2 m cable S60-PA-2-W08-NH 956201550 NPN S60-PA-2-W08-PH 956201400 PNP contrast sensor - M12 connector S60-PA-5-W08-NH 95621030 NPN S60-PA-5-W08-PH 95621020 PNP Operating distance: 19 mm All the ordering codes and information are Max. field of depth: – 2 mm 1 summarised in the last pages of this catalogue Power supply: 10 ... 30 Vdc Ripple: ≤ 2 Vpp Consumption: ≤ 30 mA 2 Light emission: white LED 400 - 700 nm Spot dimension: aprox. 3.5 mm at 19 mm Resolution: 0.5 mm Setting: teach-in push-button 3 remote on cable Setting procedure: EASYtouch™ Indicators: yellow OUTPUT LED green / red READY / ERROR LED Output type: PNP, NO NPN, NO Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 100 µs Max. switching frequency: 5 kHz Operating mode: dark with EASYtouch™ automatic dark / light with fine acquisition Timing function: 20 ms minimum output ON Auxiliary functions: remote 4 keylock Connection: 5 2 m Ø 4 mm cable 6 M12 4-pole connector TECHNICAL NOTES Electrical protection: class 2 1 Limit values Mechanical protection: IP67 2 7 Average life of 100.000 h with T = +25 °C Protection devices: A, B A Housing material: ABS 3 Connect to 0 V when remote wire not used 8 Lens materiale: window in glass (tilted anti-reflection) 4 Active with remote at +Vdc at power on Weight: 2 5 PVC, 4 x 0.14 mm 90 g max. 6 Connector can be blocked on two positions 40 g max. Operating temperature: -25 ... +55°C 7 A - reverse polarity protection Storage temperature: -25 ... +70°C B - overload and short-circuit protection Reference standard: EN 60947-5-2 8 Internal lenses in glass DETECTION DIAGRAMS Distance Contrast sensor 27 S60-PA-2-W08-NH Relative received signal S60-PA-2-W08-PH S60-PA-5-W08-NH S60-PA-5-W08-PH U LUMINESCENCE SENSOR WITH UV EMISSION The UV light LED emission detects DIMENSIONS any luminescent reference, even on very reflective surfaces, such as ceramics, metal or mirrored glass. TM The patent-covered EASYtouch A setting procedures fixes automatically the best detection conditions, simply by pressing the teach-in push-button once, with the reference to detect. The threshold between two different luminescence degrees can be set by a second C pressure of the button A C D INDICATORS AND SETTINGS A B Output status and A READY/ERROR LEDs Teach-in push-button B M12 connector output C orientable in two positions Cable output D Teach-in button for setting. EASYtouch™ provides two setting modes: standard or fine. Please refer to instructions manual for operating details. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN Vdc REMOTE + 10 ... 30 Vdc WHITE (BROWN) (WHITE) REMOTE REMOTE BLACK 0V - NO OUTPUT NO OUTPUT (BLUE) (BLACK) BLUE 28 40 mm SELECTION TABLE TECHNICAL DATA luminescence sensor - 2 m cable S60-PA-2-U08-NH 956201540 NPN S60-PA-2-U08-PH 956201390 PNP luminescence sensor - M12 connector S60-PA-5-U08-NH 956201010 NPN S60-PA-5-U08-PH 956201000 PNP Operating distance: 0 ... 40 mm All the ordering codes and information are 1 Power supply : 10 ... 30 Vdc summarised in the last pages of this catalogue Ripple: ≤ 2 Vpp Consumption: ≤ 30 mA 2 Light emission: LED UV 370 nm Spot dimension: approx. 1.5 mm at 10 mm (max. signal) Resolution: 0.5 mm Setting: teach-in push-button 3 remote on cable Setting procedure: EASYtouch™ Indicators: yellow OUTPUT LED green / red READY / ERROR LED Output type: PNP, NO NPN, NO Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 250 µs Max. switching frequency: 2 kHz Operating mode: light with EASYtouch™ automatic dark / light with fine acquisition Timing function: 20 ms minimum output ON Auxiliary functions: remote 4 keylock Connection: 5 2 m Ø 4 mm cable 6 TECHNICAL NOTES M12 4-pole connector Electrical protection: class 2 1 Limit values Mechanical protection: IP67 2 7 Average life of 100.000 h with T = +25 °C Protection devices: A, B A 3 Housing material: ABS Connect to 0 V when remote wire not used 8 Lens material: window in glass (tilted anti-reflection) 4 Active with remote at +Vdc at power on Weight: 2 5 PVC, 4 x 0.14 mm 90 g max. 6 Connector can be blocked on two positions 40 g max. 7 Operating temperature: -25 ... +55 C A - reverse polarity protection Storage temperature: -25 ... +70 C B - overload and short-circuit protection Reference standard: EN 60947-5-2 8 Internal lenses in glass DETECTION DIAGRAMS Distance Luminescence sensor 29 S60-PA-2-U08-NH Relative received signal S60-PA-2-U08-PH S60-PA-5-U08-NH S60-PA-5-U08-PH Y DISTANCE SENSOR WITH RED EMISSION This sensor gives an DIMENSIONS analogue 0-10 Vdc output proportional to the target distance in the measurement A range, with the possibility of setting a threshold for the other switching output. The yellow LED indicates the activation of the output during switching while the red LED turns on when the object is outside the measurement range. C C D Output status and range A INDICATORS AND SETTINGS LEDs Teach-in push-button B A B M12 connector output C Cable output D Teach-in button for setting. EASYtouch™ provides two setting modes: standard or fine. Please refer to instructions manual for operating details. ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing S60-PA-2 S60-PA-5 Brackets (A.04) of the General Catalogue BROWN Vdc + 18 ... 30 Vdc ANALOGUE OUTPUT (BROWN) WHITE (WHITE) ANALOGUE OUTPUT 0V - NO OUTPUT BLACK (BLUE) NO OUTPUT (BLACK) BLUE 30 150 mm SELECTION TABLE TECHNICAL DATA distance sensor - 2 m cable S60-PA-2-Y03-NV 956201680 NPN S60-PA-2-Y03-PV 956201690 PNP distance sensor - M12 connector S60-PA-5-Y03-NV 956201700 NPN S60-PA-5-Y03-PV 956201710 PNP 1 Operating distance: 50 ... 150 mm 2 All the ordering codes and information are Power supply: 18 ... 30 Vdc summarised in the last pages of this catalogue Ripple: ≤ 2 Vpp Consumption: ≤ 60 mA 3 Light emission: red LED 670 nm Spot dimensions: approx. 16 mm at 150 mm Setting: teach-in push-button Setting procedure: EASYtouch™ Indicators: yellow OUTPUT LED red FIELD LED Output type: PNP, NO NPN, NO analogue with 0 ... 10 V (8 bit) Minimum resistance load: 1 KΩ Output current: ≤ 100 mA Saturage voltage: ≤ 2 V Response time: 1 ms Switching frequency: 500 Hz Resolution: 1 mm (linearity ± 2.5 %) Operating mode: light with EASYtouch™ automatic dark / light fine acquisition configurable direct/inverse proportionality Switching output hysterisis: 10 % max. Connection: 4 2 m Ø 4 mm cable 5 M12 4-pole connector TECHNICAL NOTES Electrical protection: class 2 1 Measurement field can be reduced at device Mechanical protection: IP67 6 setting Protection devices: A, B 2 Housing material: ABS Limit values 7 Lens material: window in PMMA 3 Average life of 100.000 h with T = +25 °C A Weight: 2 4 PVC, 4 x 0.14 mm 90 g max. 5 Connector can be blocked on two positions 40 g max. 6 Operating temperature: -25 ... +55°C A - reverse polarity protection B - overload and short-circuit protection Storage temperature: -25 ... +70°C 7 Reference standard: EN 60947-5-2 Internal lenses in Polycarbonate II3D DETECTION DIAGRAMS 150 0 50 100 150 200 (mm) Operating distance mm Distance Analogue output on max. measurement range in inverse proportionality 31 S60-PA-2-Y03-NV S60-PA-2-Y03-PV S60-PA-5-Y03-NV S60-PA-5-Y03-PV Voltage (V) TECHNOLOGY ADVANTAGES The S60 series establishes the new market standard in the compact 50 x 50 mm fotoelectric sensors, offering a complete family of optic functions with only 15 mm housing width. The standard dimensions, reduced housing width and the multi-hole fixing system make the S60 series compatible with the majority of compact sensors present on the market. COMPACT PHOTOELECTRIC SENSORS STANDARD 50 x 50 x 15 mm (mm) All the models are available in cable or M12 connector versions, with NPN or PNP type static output, conforming to the EN 60947-5-2 European standard. The M12 connector can be easily rotated to 90° and can be blocked in the straight or right-angle positions respect to the optic axis, the cable emerges at 45° and thanks to its flexibility can rotate pratically 360°. Thanks to these characteristics the sensor can be easily fixed on all sides and at all angles. All the basic optic functions such as the through beam, polarised retroreflex, diffuse proximity and background suppression are available also in the version with visible red laser emission, with all the safety charateristics for the user in class 1 conforming to the EN 60825-1 European standard and in class II according to CDRH21 CFR Part 1040 USA standard. Besides the evident advantages for the alignment of sensors and of the object to detect, thanks to the high spot visibility and concentration, the laser emissions offer an improved detection resolution, millimetric for the through beam and polarised retroreflex versions, or decimillimetric for the diffuse proximity and background suppression. The polarised retroreflex model is available also in the coaxial optic version that, with the emitter optic axis coinciding with the receiver one, offers a better detection axis precision and the elimination of the blind zone near to the sensor. 32 TECHNOLOGY ADVANTAGES The coaxial optics is present also in the polarised retroreflex model for the detection of transparent objects, notably increasing the performances of this optic function and its immunity to object movements inside the detection area. The contrast sensor with white LED emission has an operating distance ranging from 17 to 21 mm and detects coloured or grey-scale marks, with a minimum dimension of 0.5 mm and an operating frequency reaching 5 kHz. The luminescence sensor with UV LED emission has an operating distance ranging from 0 to 40 mm and detects fluorescent or luminescent targets, with a minimum dimension of 0.5 mm and an operating frequency reaching 2 kHz. The setting of these sensors is extremely rapid and easy, thanks to the patent-covered EASYtouch™ system that alllows to automatically fix the object detection threshold, with a single pressure of the teach-in push-button. It is possibile to set the sensor to detect more critical differences between the mark and the background, or invert the dark or light operating mode, by pressing twice the push-button. The EASYtouch™ system allows to select the ‘Remote’ function for the remote sensor setting through the cable or connector, the ‘Keylock’ function to block the keyboard, ‘Delay OFF’ function for the 20 ms timing of the output deactivation. The sensor technology with background and/or foreground suppression of the S60 series has allowed to develop also a cost-effective distance sensor with a double output: a 0 - 10 V analogue output and a digital NPN or PNP switching output. The measurement range and the switching threshold output can be selected in the 50 - 150 mm range, with a ± 1 mm precision; the direct or inverse proportionality and the light or dark operating mode can be selected. SMT chip-size for the electronic miniaturisation and more space for the optics COAXIAL OPTICS BIAXIAL OPTICS Complete external shield for high electromagnetic compatibility 33 DIMENSIONS ACCESSORIES JOINT-60 ST-504 ST-5018 ST-5019 ST-5020 ST-5021 34 ACCESSORIES The series is compatible with the following Datasensor accessories (refer General Catalogue) - CS connectors - R reflectors New accessories dedicated to the S60 series have been developed to cover all the fixing requirements and improve functioning. SELECTION TABLE AND ORDER INFORMATION ACCESSORIES MODEL DESCRIPTION ORDER N° ST-5018 protection bracket 95ACC5310 ST-5019 protection bracket 95ACC5320 ST-5020 fixing bracket 95ACC5330 ST-5021 fixing bracket 95ACC5340 JOINT-60 protection bracket with jointed support 95ACC5350 ST-504 S6/S60 fixing bracket 95ACC1320 MODEL CODING TABLE S60-PA-2-B01-NN HOUSING OPTICS OPTIC FUNCTION P = plastic flat A = normal refer to INDEX L = laser ALPHABETICAL SETTING MODELINDEX 0 = fixed 1 = trimmer CONNECTION 3 = tteach-in push-button 2 = cable 8 = teach-in push-button with 5 = M12 connection delay-OFF function INPUTS / OUTPUTS NH = NPN NO output with REMOTE SET input PH = PNP NO with REMOTE SET input NN = NPN NO-NC output PP = PNP NO-NC output NV = NPN NO output with 0-10 V output PV = PNP NO output with 0-10 V output XG = no output - test input Note: Not all code combinations are available. Please refer to alphabetical model index for the list of available models. 35 ALPHABETICAL MODEL INDEX MODEL FUNCTION CONNECTION OUTPUT N ORDER PAGE S60-PA-2-B01-NN polarised retroreflex cable NPN 956201460 6 S60-PA-2-B01-PP polarised retroreflex cable PNP 956201300 6 S60-PA-2-B51-NN coaxial polarised retroreflex cable NPN 956201610 8 S60-PA-2-B51-PP coaxial polarised retroreflex cable PNP 956201600 8 S60-PA-2-C01-NN diffuse proximity cable NPN 956201470 14 S60-PA-2-C01-PP diffuse proximity cable PNP 956201310 14 S60-PA-2-C11-NN long diffuse proximity cable NPN 956201480 16 S60-PA-2-C11-PP long diffuse proximity cable PNP 956201320 16 S60-PA-2-F01-NNrecevier cable NPN9562014902 S60-PA-2-F01-PP recevier cable PNP 956201330 2 S60-PA-2-G00-XG emitter cable - 956201340 2 S60-PA-2-M08-NH background suppression cable NPN 956201500 20 S60-PA-2-M08-PH background suppression cable PNP 956201350 20 S60-PA-2-N03-NH fore-background suppression cable NPN 956201520 24 S60-PA-2-N03-PH fore-background suppression cable PNP 956201370 24 S60-PA-2-T51-NN retroreflex for transparents cable NPN 956201530 12 S60-PA-2-T51-PP retroreflex for transparents cable PNP 956201380 12 S60-PA-2-U08-NH luminescence sensor cable NPN 956201540 28 S60-PA-2-U08-PH luminescence sensor cable PNP 956201390 28 S60-PA-2-W08-NH contrast sensor cable NPN 956201550 26 S60-PA-2-W08-PH contrast sensor cable PNP 956201400 26 S60-PA-2-Y03-NV distance sensor cable NPN 956201680 30 S60-PA-2-Y03-PV distance sensor cable PNP 956201690 30 S60-PA-5-B01-NN polarised retroreflex M12 connector NPN 956201180 6 S60-PA-5-B01-PP polarised retroreflex M12 connector PNP 956201040 6 S60-PA-5-B51-NN coaxial polarised retroreflex M12 connector NPN 956201630 8 S60-PA-5-B51-PP coaxial polarised retroreflex M12 connector PNP 956201620 8 S60-PA-5-C01-NN diffuse proximity M12 connector NPN 956201190 14 S60-PA-5-C01-PP diffuse proximity M12 connector PNP 956201050 14 S60-PA-5-C11-NN long diffuse proximity M12 connector NPN 956201200 16 S60-PA-5-C11-PP long diffuse proximity M12 connector PNP 956201110 16 S60-PA-5-F01-NNrecevier M12 connectorNPN9562012102 S50-PA-5-F01-PPrecevier M12 connectorPNP9562010602 S60-PA-5-G00-XG emitter M12 connector - 956201070 2 S60-PA-5-M08-NH background suppression M12 connector NPN 956201220 20 S60-PA-5-M08-PH background suppression M12 connector PNP 956201080 20 S60-PA-5-N03-NH fore-background suppression M12 connector NPN 956201240 24 S60-PA-5-N03-PH fore-background suppression M12 connector PNP 956201090 24 S60-PA-5-T51-NN retroreflex for transparents M12 connector NPN 956201250 12 S60-PA-5-T51-PP retroreflex for transparents M12 connector PNP 956201100 12 S60-PA-5-U08-NH luminescence sensor M12 connector NPN 956201010 28 S60-PA-5-U08-PH luminescence sensor M12 connector PNP 956201000 28 S60-PA-5-W08-NH contrast sensor M12 connector NPN 956201030 26 S60-PA-5-W08-PH contrast sensor M12 connector PNP 956201020 26 S60-PA-5-Y03-NV distance sensor M12 connector NPN 956201700 30 S60-PA-5-Y03-PV distance sensor M12 connector PNP 956201710 30 S60-PL-2-B01-NN laser polarised retroreflex cable NPN 956201560 10 S60-PL-2-B01-PP laser polarised retroreflex cable PNP 956201410 10 S60-PL-2-C01-NN laser diffuse proximity cable NPN 956201640 18 S60-PL-2-C01-PP laser diffuse proximity cable PNP 956201650 18 S60-PL-2-F01-NN laser receiver cable NPN 956201570 4 S60-PL-2-F01-PP laser receiver cable PNP 956201420 4 S60-PL-2-G00-XG laser emitter cable - 956201430 4 S60-PL-2-M08-NH laser background suppression cable NPN 956201580 22 S60-PL-2-M08-PH laser background suppression cable PNP 956201440 22 S60-PL-5-B01-NN laser polarised retroreflex M12 connector NPN 956201260 10 S60-PL-5-B01-PP laser polarised retroreflex M12 connector PNP 956201120 10 S60-PL-5-C01-NN laser diffuse proximity M12 connector NPN 956201660 18 S60-PL-5-C01-PP laser diffuse proximity M12 connector PNP 956201670 18 S60-PL-5-F01-NN laser receiver M12 connector NPN 956201270 4 S50-PL-5-F01-PP laser receiver M12 connector PNP 956201140 4 S60-PL-5-G00-XG laser emitter M12 connector - 956201150 4 S60-PL-5-M08-NH laser background suppression M12 connector NPN 956201280 22 S60-PL-5-M08-PH laser background suppression M12 connector PNP 956201160 22 UNI EN ISO9001 UNI EN ISO14000 Distributed by: HEADQUARTERS DATASENSOR SpA via Lavino, 265 - 40050 Monte San Pietro, BO - Italy Tel. +39 051/6765611 • Fax +39 051/6759324 www.datasensor.com • e-mail info@datasensor.com Datasensor SpA endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct installation and use Datasensor SpA can guarantee only the data indicated in the instruction manual supplied with the products. Printed in Italy in January 2005 Rev. 01 UNIVERSAL COMPACT SENSORS