MEAN WELL SD-1000 SERIES 1000 Watt Chassis Mount DC-DC Converter 1000W Single Output DC-DC Converter SD-1000 series Measures: 11.61 x 5 x 1.61” ■“ ‰ �›‚  ˆ �­„ƒ‚ ‡‚˜ ƒ �
•˜• �š ‰œƒ ˜’˜’’„˜’  �  ž„  �Ÿ † †““  �Ÿ †    �“ „ †  ‚ƒ   �

 Œ   �ˆ‚  SPECIFICATION MODEL SD-1000L-12 SD-1000L-24 SD-1000L-48 SD-1000H-12 SD-1000H-24 SD-1000H-48 DC VOLTAGE 12V 24V 48V 12V 24V 48V RATED CURRENT 60A 40A 21A 60A 40A 21A CURRENT RANGE 0 ~ 60A 0 ~ 40A 0 ~ 21A 0 ~ 60A 0 ~ 40A 0 ~ 21A RATED POWER 720W 960W 1008W 720W 960W 1008W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 11 ~ 15V 23 ~ 30V 46 ~ 60V 11 ~ 15V 23 ~ 30V 46 ~ 60V VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION SETUP, RISE TIME 500ms, 50ms at full load 72 ~ 144VDC VOLTAGE RANGE Note.5 19 ~ 72VDC EFFICIENCY (Typ.) 84% 88% 90% 85% 89% 92% INPUT DC CURRENT (Typ.) 11.6A/96VDC 23.5A/48VDC INRUSH CURRENT (Typ.) ----- 100A/96VDC 105 ~ 125% rated output power OVERLOAD Protection type : Constant current limiting, unit will shut down o/p voltage after about 5sec. Re-power on to recover 16 ~ 19V 30.8 ~ 35.2V 62 ~ 68V 16 ~ 19V 30.8 ~ 35.2V 62 ~ 68V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down Please refer to function manual REMOTE ON/OFF CONTROL FUNCTION OUTPUT OK SIGNAL Open collector signal low when PSU turns on, maximum, sink current :10mA -20 ~ +60℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ±℃ 0.02%/ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS IEC60950-1 CB approved by TUV WITHSTAND VOLTAGE I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 4) Compliance to EN55022 (CISPR22) EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A MTBF 106.7K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 295*127*41mm (L*W*H) 1.94Kg; 6pcs/12.6Kg/1.15CUFT PACKING        
℃   NOTE
  
 ­€ ‚ƒ  „
… ‚†‚ ‚ƒ   ‡   ˆ ‰     „   „   ƒ‚    ‚ƒƒ‚    Š  ƒ‹  Œ   „ƒ   ‡
ˆ Ž ‚ƒƒ‘ ƒ Š   † ƒ‹ ’ “„   ƒ‚ ƒ‹ ”‹ • „  ‚ –—’ ƒ‰˜˜‚‚‚ ‚™  „  ‚  ’„šƒ‘ƒ „ ’ File Name:SD-1000-SPEC 2015-07-27 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SD-1000-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om MEAN WELL SD-1000 SERIES 1000 Watt Chassis Mount DC-DC Converter 1000W Single Output DC-DC Converter SD-1000 series Measures: 11.61 x 5 x 1.61” Mechanical Specification Case No. 952B Unit:mm 277.7 6 3-M4 L=6 41 295 23 21 34.5 15.5 +V -V Air flow CN51 direction 10 2 SVR51 9 1 TB1 3 2 3-M4 L=4 1 3-M4 L=6 6 277.7 DC Input Terminal Pin No. Assignment Control pin number assignment (CN51) : HRS DF11-10DP-2DS or equivalent Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 DC INPUT V+ 159 +S AUX RCG 2 DC INPUT V- 2 -S 6 AUXG 10 NC HRS DF11-10DS JST SPHD-002T-P0.5 3 FG or equivalent or equivalent 3 OUTPUT OK 7 RC1 4 8 RC2 GND Block Diagram BOOST fosc : 70KHz +S PWM fosc : 90KHz ACTIVE POWER RECTIFIERS EMI +V INRUSH I/P SWITCH- & BOOST CURRENT FILTER -V ING FILTER LIMITING -S BOOST O.V.P. CONTROL O.L.P. PWM DETECTION O.T.P. CONTROL CIRCUIT OUTPUT REMOTE ON/OFF CONTROL AUX FAN POWER Derating Curve Static Characteristics 100 100 90 for SD-1000L for SD-1000H 80 80 60 70 60 40 50 20 40 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) 19 24 36 48 72 96 144 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VDC) File Name:SD-1000-SPEC 2015-07-27 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SD-1000-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om LOAD (%) 127 18.5 27.5 86.5 20.5 12.7 10.16 20.5 DC O/P 18.5 90 LOAD (%) 59 7.8 25.4 25.4 7.8 MEAN WELL SD-1000 SERIES 1000 Watt Chassis Mount DC-DC Converter 1000W Single Output DC-DC Converter SD-1000 series Measures: 11.61 x 5 x 1.61” Function Description of CN51 Pin No. Function Description Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to 1 +S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to 2 -S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Open collector signal, referenced to pin4(GND). Low when PSU turns on. The maximum sink current is 10mA and the maximum 3 O/P OK external voltage is 13V. 4 GND These pins connect to the negative terminal (-V). 5 AUX Auxiliary voltage output, 10.8~13.2V referenced to pin6(AUXG).The maximum load current is 0.25A. 6 AUXG Auxiliary voltage output ground. The signal return is isolated from the output terminals(+V & -V). 7 RC1 Remote ON/OFF 8 RC2 Remote ON/OFF 9 RCG Remote ON/OFF ground 10 NC No connection Function Manual 1.Remote ON/OFF (1)Remote ON/OFF control becomes available by applying voltage in CN51 (2)Table 1.1 shows the specification of Remote ON/OFF function (3)Fig.1.2 shows the example to connect Remote ON/OFF control function Table 1.1 Specification of Remote ON/OFF Connection Method Fig. 1.2(A) Fig. 1.2(B) Fig. 1.2(C) Output on SW Open SW Open SW Close SW Logic Output off SW Close SW Close SW Open Fig.1.2 Examples of connecting remote ON/OFF (A)Using external voltage source (B)Using internal 12V auxiliary output AUX AUX 2.2KΩ 2.2KΩ RC1 RC1 5V 150Ω 150Ω RC2 RC2 12V typ. 12V typ. 620Ω SW RCG RCG SW AUXG AUXG (C)Using internal 12V auxiliary output AUX 2.2KΩ RC1 150Ω RC2 12V typ. SW RCG AUXG File Name:SD-1000-SPEC 2015-07-27 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SD-1000-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om MEAN WELL SD-1000 SERIES 1000 Watt Chassis Mount DC-DC Converter 1000W Single Output DC-DC Converter SD-1000 series Measures: 11.61 x 5 x 1.61” 2.Output OK signal "Output OK" is an open collector signal. It indicates the output status of the PSU. It can operate in two ways : One is sinking current from external signal ; the other is sending out a voltage signal. 2-1 Sink current : The maximum sink current is 10mA and the maximum external voltage is 13V. 2-2 Voltage signal : Between O/P OK(pin3) and GND(pin4) Output Status +V -V TB1 0 ~ 0.5V ON SVR51 12 ~ 13V OFF CN51 1 2 CN51 -S +S 2 1 GND O/P OK 10 9 CN51 AUXG AUX RC2 RC1 Fig 2.1 NC RCG 10 9 3.Remote Sense The remote sensing compensates voltage drop on the load wiring up to 0.5V. +V -V TB1 SVR51 CN51 2 1 -S +S GND O/P OK 2 1 CN51 10 9 CN51 AUXG AUX RC2 RC1 NC RCG 9 10 Sense lines should LOAD be twisted in pairs +S -S (pin1) (pin2) - + Fig 3.1 File Name:SD-1000-SPEC 2015-07-27 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SD-1000-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om