N2POWER XL160 SERIES N2POWER XL160 AC-DC SERIES 160 Watt Open Frame Power Supply POWER SOLUTIONS ULTRA SMALL, HIGH EFFICIENCY POWER SUPPLIES Measures: 5.00 x 3.00 x 1.25” POWER SUPPLY DESIGN LEADER N2Power continues to lead the power density race with its new small, high efficiency XL160 Series AC-DC power supplies. Our patented technology yields a very small footprint, reduces wasted power, and offers the highest power density in the marketin the 160 watt range. This unique design means reduced energy costs, a greater return on your investment, higher reliability and longer product life. HIGHLIGHTS • 160 W AC-DC • Up to 90% Efficiency Typical Mechanical Drawing: • Inches (millimeters), connectors and pinouts may vary with model. High Power Density: 8.5 W / in3 Refer to XL160 Product Specification for complete information. • Universal AC input • Active PFC (90-264 VAC) .225 5.00 (5.7) (127.0) Built in OR-ing Diodes for N+1 (Optional) • 4.55 .225 (115.6) (5.7) 3” X 5” Small Footprint • • <1U High: 1.25" • No Load Operation XL160 AC - DC 3.00 2.55 Height = 1.25 (31.8) RoHS Compliant • (76.2) (64.8) Safety ground connection point at plated through hole PFC READY, SAVE ENERGY All XL160 products incorporate active PFC Lock Screws shown for reference washer only technology with universal input to provide 1.25 0.19 1.00 0.06 superior efficiency in each supply. (31.8) (25.4) (1.5) (4.8) Comparisons of power loading show that our supplies can reduce consumption up to Printed Circuit Board 50%. HIGH EFFICIENCY IN A SMALL PACKAGE UNMATCHED POWER DENSITY With an overall height of 1.25" and a 3" x 5" The XL160 Series provides up to 90% efficiency in an AC-DC footprint, the XL160 Series boasts a power power supply. Our unique design reduces energy consumption density of 8.5 watts per cubic inch. It is ideally and generates less wasted heat. It requires little forced air suited for OEMs using industry standard 1U cooling, decreases AC loads, increases reliability and chassis. economy of operation Contact us regarding custom and modified standard supplies for unique applications. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/n2power-XL160-power-supply.html h t t p: / / pow e r. sa ge r. c om 1 1 1 N2POWER XL160 SERIES N2POWER XL160 AC-DC SERIES 160 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.25” POWER SOLUTIONS ULTRA SMALL, HIGH EFFICIENCY POWER SUPPLIES INPUT SPECIFICATIONS PART REGULATION MAXIMUM RIPPLE & MODEL OUTPUT VOLTAGE NUMBER (%) CURRENT (A) NOISE (P-P) Nominal Input Voltage: 100 – 240 VAC Maximum AC Input: 90 – 264 VAC XL160-05 400012-12-6 V1 5 ±3 32.0 50 mV XL160-05 CS 400012-01-9 V2 12 ±5 1.0 120 mV Input Frequency Range: 47 – 63 Hz V1 7 ±3 22.9 70 mV Input Current: 2.2 A @ 100 VAC XL160-07 CS 400012-05-0 V2 12 ±5 1.0 120 mV Input Protection: 3.15 A fuse V1 8 ±3 20.0 80 mV Safety Isolation: 3000 VAC input to output XL160-08 CS 400012-10-0 1500 VAC input to ground V2 12 ±5 1.0 120 mV Inrush Current: 33 A @ 115 VAC V1 5 ±4 20.0 50 mV < Leakage Current: 0.75 mA XL160-11* 400060-01-8 V2 12 ±5 6.0 120 mV Power Factor Active PFC circuitry, meets V3 –12 ±5 1.0 120 mV Correction: or exceeds EN61000-3-2 XL160-12 400013-12-4 V1 12 ±3 13.3 120 mV OUTPUT SPECIFICATIONS XL160-12 CS 400013-01-7 V2 12 ±5 1.0 120 mV Total Power: 160 W XL160-15 400014-03-1 V1 15 ±3 10.7 150 mV Hold-up Time: Minimum 22 mS XL160-15 CS 400014-01-5 V2 12 ±5 1.0 120 mV at all input voltages V1 19 ±3 8.4 190 mV † XL160-19 CS 400015-04-6 Efficiency: Up to 90% V2 12 ±5 1.0 120 mV † Minimum Load: No load XL160-24 400015-07-9 V1 24 ±3 6.7 240 mV Over / Under Shoot: Maximum 10% at turn-on XL160-24 CS 400015-01-2 V2 12 ±5 1.0 120 mV PROTECTION V1 30 ±3 5.3 300 mV XL160-30 CS 400015-08-7 V2 12 ±5 1.0 120 mV Overvoltage Protection: On all main outputs XL160-48 400016-07-7 V1 48 ±3 3.3 480 mV Overpower Protection: Protected / Auto-recovery XL160-48 CS 400016-01-0 V2 12 ±5 1.0 120 mV Short Circuit Protection: All outputs protected against short circuit XL160-51 400016-08-5 V1 51 ±3 3.1 510 mV Thermal Shutdown: Protected against XL160-51 CS 400016-03-6 V2 12 ±5 1.0 120 mV overtemperature conditions XL160-54 400033-02-3 V1 54 ±3 2.9 540 mV OPERATING SPECIFICATIONS XL160-54 CS 400033-01-5 V2 12 ±5 1.0 120 mV Operating Temperature: –25 to +50 C XL160-56 400032-02-1 V1 56 ±3 2.8 560 mV ˚ Temperature Derating: 2.5% / degree C to 70 C XL160-56 CS 400034-01-3 V2 12 ±5 1.0 120 mV ˚ Storage Temperature: –40 to +85 C V1 3.3 ±3 15.0 50 mV ˚ Forced Air Cooling: 10 CFM V2 5 ±5 20.0 50 mV XL160-1 400011-01-1 Convection Cooling: See Product V3 12 ±5 6.0 120 mV Specification V4 –12 ±5 1.0 120 mV MTBF: 675,333 hours @ 25 C* ˚ V1 2.5 ±3 15.0 50 mV SIGNALS V2 5 ±4 20.0 50 mV XL160-7 4000017-01-8 †Δ V3 12 ±5 6.0 120 mV Remote Sense: On main output V4 1 ±5 1.0 120 mV Current Sharing: Active current sharing V1 5 ±4 20.0 50 mV with OR-ing diode †Δ or MOSFETs XL160-8 400018-01-6 V2 12 ±5 6.0 120 mV † Power Good: Provided V3 1 ±5 1.0 120 mV † PS_OK: Output V1 5.6 ±3 24.0 56 mV XL160-10 400028-01-5 † LED: Some models V2 –5.8 ±5 1.5 58 mV CS = Current Sharing *OR-ing diode on V1 / V2 output † See Product Specification Δ Some Models * See MTBF Report for additional temperature values 1 Compliance: USA/Canada: Europe: International: Safety: Underwriters Laboratories: UL 60950-1:2007 (2nd Edition) / 2006/95/EC - “Low Voltage (Safety) Directive” IEC 60950-1:2005 (2nd Edition) Safety of Information Technology C22.2 No. 60950-1-07 Safety of Information Technology Demko: EN 60950-1:2006+A11:2009 Equipment Equipment (ITE) nd (2 Edition) EMC: FCC part 15, subpartB 2004/108/EC “Electromagnetic Compatibility (EMC) Directive” IEC 61204-3 Class B 1 EN 61204-3 Class B See Product Specification for additional information For complete specifications on all models, please visit our website at: www.qualstar.com All information and specifications are based on our Qualstar and the Qualstar logo are registered knowledge of the products at the time of printing. trademarks of Qualstar Corporation. N2Power N2Power reserves the right to change specifications and the N2Power logo are trademarks of Qualstar without notice. Corporation. All other trademarks are the property of their respective owners. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 QUALSTAR CORPORATION power@sager .com http://power.sager.com/n2power-XL160-power-supply.html 3990-B Heritage Oak Court Simi Valley, CA 93063 h t t p: / / pow e r. sa ge r. c om NASDAQ: QBAK www.qualstar.com Tel: 805-583-7744 Fax: 805-583-7749 2– 2–