Safety Network Controller NE1A-SCPU Series F44I-E-01 Achieve Safety Control through Programming. • Compact Safety Controller. The NE1A-SCPU01-V1 provides 16 built-in safety inpu ts and 8 built-in safety outputs. The NE1A-SCPU02 provides 40 built-in safety inputs and 8 built-in safety outputs. Reduced wiring with safety networks. Connect up to 32 Safety Terminals. Monitor the safety system from Standard Controllers across the network. ISO13849-1 (PLe) and IEC 61508 SIL3 certification. Ordering Information List of Models No. of I/O points Name Model Unit version Safety inputs Test outputs Safety outputs 16 4 8 NE1A-SCPU01-V1 2.0 Safety Network Controllers 40 8 8 NE1A-SCPU02 2.0 Note: The standard NE1A Controllers are equipped with spring-cage terminal blocks, but other screw terminal blocks are available if desired, e.g., to replace previous terminals. Refer to CIP Safety on DeviceNet Accessories. Specifications Certified Standards Specifications Certification body Standard Item Model NE1A-SCPU01-V1 NE1A-SCPU02 NFPA 79-2012 Communications power sup- 11 to 25 VDC supplied via communications EN ISO13849-1: 2008 ply voltage connector IEC61508 part 1-7: 2010 Internal circuit power supply IEC61131-2: 2007 voltage (V0) *1 EN ISO13849-2: 2012 20.4 to 26.4 VDC (24 VDC −15%/+10%) I/O power supply voltage (V1, TÜV Rheinland EN61000-6-4: 2007 V2) *1 EN61000-6-2: 2005 EN60204-1: 2006 Communications 24 VDC, 15 mA EN ISO13850: 2006(EN418: 1992) power supply ANSI RIA15.06-1999 Current Internal circuit ANSI B11.19-2010 con- 24 VDC, 230 mA 24 VDC, 280 mA power supply sumption UL508 I/O power supply 24 VDC, 40 mA (Input) 24 VDC, 80 mA (Input) ANSI/ISA 12.12.01 *2 120 mA (Output) 150 mA (Output) UL1998 UL NFPA79 Overvoltage category II IEC61508 Noise immunity Conforms to IEC61131-2. CSA22.2 No.142 2 CSA22.2 No.213 Vibration resistance 10 to 57 Hz: 0.35 mm, 57 to 150 Hz: 50 m/s 2 Shock resistance 150 m/s : 11 ms Mounting method DIN Track (IEC 60715 TH35-7.5/TH35-15) Ambient operating temperature −10 to 55°C Ambient operating humidity 10% to 95% (with no condensation) Ambient storage temperature −40 to 70°C Degree of protection IP20 Serial interface USB version 1.1 Weight 460 g max. 690 g max. *1. V0-G0: Internal control circuit V1-G1 (G): For external input device, test output V2-G2 (G): For external output device The two ground terminals on the NE1A-SCPU02 are internally connected. *2. Not including power consumption for external devices. 1 NE1A-SCPU Series Safety Input Specifications Test Output Specifications Input type Sinking inputs (PNP) Output type Sourcing outputs (PNP) 11 VDC min. between each terminal and Rated output ON voltage 0.7 A max./output * ground current 5 VDC min. between each terminal and ON residual 1.2 V max. between each output terminal and OFF voltage ground voltage V1 OFF current 1 mA max. Leakage current 0.1 mA max. Input current 4.5 mA *The maximum current for simultaneously ON outputs is 1.4 A. (T0 to T3: NE1A-SCPU01-V1, T0 to T7: NE1A-SCPU02) A 15 to 400-mA, 24-VDC external indicator can be connected to T3 Safety Output Specifications and T7. Output type Sourcing outputs (PNP) Rated output 0.5 A max./output current ON residual 1.2 V max. between each output terminal and voltage V2 Leakage current 0.1 mA max. DeviceNet Communications Specifications Communications protocol DeviceNet compliant Connection form Multi-drop system and T-branch system can be combined (for trunk line and branch lines) Communications speed 500/250/125 kbps Communications media Special cable, 5 conductors (2 for communications, 2 for power supply, 1 for shielding) Communications speed Max. network length Branch length Total branch length 500 kbps 100 m max. (100 m max.) 39 m max. Communications distance 250 kbps 250 m max. (100 m max.) 6 m max. 78 m max. 125 kbps 500 m max. (100 m max.) 156 m max. Note: Figures in parentheses ( ) indicate values when a thin cable is used. Communications power supply 11 to 25 VDC No. of connectable nodes 63 Safety Master function • Max. no. of connections: 16 • Max. data size: Input 16 bytes or output 16 bytes (per connection) Safety I/O communications • Connection type: Single-cast, multi-cast (Pre-Ver. 1.0) Safety Slave function • Max. no. of connections: 4 • Max. data size: Input 16 bytes or output 16 bytes (per connection) • Connection type: Single-cast, multi-cast Safety Master function • Max. no. of connections: 32 • Max. data size: Input 16 bytes or output 16 bytes (per connection) • Connection type: Single-cast, multi-cast Safety I/O communications (unit version 1.0 or later) Safety Slave function • Max. no. of connections: 4 • Max. data size: Input 16 bytes or output 16 bytes (per connection) • Connection type: Single-cast, multi-cast Standard Slave function • Max. no. of connections: 2 Standard I/O communications (all unit versions) • Max. data size: Input 16 bytes or output 16 bytes (per connection) • Connection type: Poll, bit-strobe, COS, cyclic Message communications Max. message length: 552 bytes 2 NE1A-SCPU Series Functions Function Blocks NE1A-SCPU-series Controller support the following logic functions and function blocks. Support depends on the unit version. Logic Functions Function Blocks Supporting unit Supporting unit Name Function list entry Name Function list entry versions versions NOT NOT Reset Reset AND AND Restart Restart OR OR All Emergency Stop E-STOP Monitoring Exclusive OR EXOR Light Curtain Exclusive NOR EXNOR Light Curtain Monitoring Monitoring RS Flip-flop RS-FF Safety Gate 1.0 or later Safety Gate Monitoring Comparator Comparator Monitoring All Two-hand Controller Two Hand Controller Off-Delay Timer Off-Delay Timer On-Delay Timer On-Delay Timer User Mode Switch User Mode Switch Monitoring External Device EDM Monitoring Routing Routing Muting Muting Enable Switch Enable Switch Monitoring 1.0 or later Pulse Generator Pulse Generator Counter Counter Multiconnector Multi Connector 3 NE1A-SCPU Series Internal Circuit Diagrams NE1A-SCPU01-V1 V0 NC G0 Terminal name Description NC V0 Power supply terminal for internal circuit V0 24 VDC G0 The two V0 terminals are internally connected. Power supply terminal for internal circuit G0 The two G0 terminals are internally connected. V1 V+ Power supply terminal for external input device V1 24 VDC CAN H G1 and test output Shield T0 Power supply terminal for external input device CAN L G1 and test output V− T3 V2 Power supply terminal for external output device IN0 G2 Power supply terminal for external output device IN0 to IN15 Safety input terminal IN15 Test output terminal V2 Connected to IN0 to IN15 safety inputs. 24 VDC Each test output terminal outputs a different test G2 T0 to T3 pulse pattern. Terminal T3 also supports a current monitoring function for the output signal. D+ USB Example: Muting lamp D− L OUT0 OUT0 to OUT7 Safety output terminals L OUT7 NE1A-SCPU02 Terminal name Description V0 Power supply terminal for internal circuit 24 VDC G0 V0 The two V0 terminals are internally connected. Power supply terminal for internal circuit G0 The two G0 terminals are internally connected. V1 V+ Power supply terminal for external input device 24 VDC CAN H G V1 and test output Shield T0 CAN L Power supply terminal for external input device V− G and test output T7 V2 Power supply terminal for external output device IN0 G Power supply terminal for external output device IN39 IN0 to IN39 Safety input terminal Test output terminal V2 Connected to IN0 to IN19 safety inputs. 24 VDC G Each test output terminal outputs a different test T0 to T3 pulse pattern. Terminal T3 also supports a current monitoring D+ function for the output signal. USB D− Example: Muting lamp L OUT0 Test output terminal L OUT7 Connected to IN20 to IN39 safety inputs. Each test output terminal outputs a different test T4 to T7 pulse pattern. Terminal T7 also supports a current monitoring function for the output signal. Example: Muting lamp OUT0 to OUT7 Safety output terminals Refer to the CIP Safety on DeviceNet Safety Network Controllers Operation Manual (Cat. No. Z906) for wiring examples. 4 DC-DC Converter DeviceNet DC-DC Converter DeviceNet (Non-insulated) (Non-insulated) Physical Layer Physical Layer Internal Circuit Internal Circuit Safety Input Circuit DC-DC Converter Safety Input Circuit DC-DC Converter Safety Output Circuit Safety Output Circuit Test Output Circuit (Insulated) Test Output Circuit (Insulated) NE1A-SCPU Series Dimensions (Unit: mm) NE1A-SCPU01-V1 MS NS LOCK COMM 0 2 4 6 8 10 12 14 NE1A-SCPU01-V1 1 3 5 7 9 11 13 15 SAFETY NETWORK CONTROLLER USB NODE ADR IN 0 0 ×10 ×1 0 2 4 6 8 10 12 14 1 O 1 3 5 7 9 11 13 15 2 N 3 4 (99) 111.1 0 2 4 6 ON V1 G1 T0 T2 BAUD RATE 1 3 5 7 V2 G2 T1 T3 OUT 24VDC V1 G1 T0 T2 0 2 4 6 V2 G2 T1 T3 1 3 5 7 24VDC V0 G0 V0 G0 90.4 (114.1) 131.4 NE1A-SCPU02 MS NS LOCK COMM 0 2 4 6 8 10 12 14 20 22 24 26 28 30 32 34 NE1A-SCPU02 1 3 5 7 9 11 13 15 21 23 25 27 29 31 33 35 SAFETY NETWORK CONTROLLER USB NODE ADR IN 00 0 2 4 6 8 10 12 14 20 22 24 26 28 30 32 34 ×10 ×1 1 O 2 N 1 3 5 7 9 11 13 15 21 23 25 27 29 31 33 35 3 4 (99) 111.1 16 18 0 2 36 38 4 6 ON BAUD RATE 17 19 1 3 37 39 5 7 IN OUT IN OUT 24VDC V1G 16 18 T0 T2 0 2 NC NC 36 38 T4 T6 4 6 V2G 17 19 T1 T3 1 3 NC NC 37 39 T5 T7 5 7 24VDC V0G0 V0G0 135.6 (114.1) 131.4 5 NE1A-SCPU Series Safety Precautions Refer to the "Safety Precautions for All CIP Safety on DeviceNet Systems" for precautions. Be sure to read the following user's manual for other details required for correct use of the Safety Network Controller. CIP Safety on DeviceNet Safety Network Controller User's Manual (Cat. No. Z916) Functions Supported According to Unit Version ❍: Supported, ---: Not supported Model NE1ASCPU01 NE1ASCPU01-V1 NE1ASCPU02 Unit version Unit version Unit version Pre-Ver. 1.0 Function 1.0/2.0 1.0/2.0 Logic processing functions Maximum program size (total number of function 128 254 254 blocks) New Function Blocks • RS flip-flop • Multiconnector • Muting --- ❍❍ • Enable Switch Monitoring • Pulse Generator • Counter • Comparator Selecting a rising edge as the reset condition for --- ❍❍ Reset and Restart function blocks Using local I/O status in logic programming --- ❍❍ Using overall Unit status in logic programming --- ❍❍ ❍ ❍ Program execution wait functions --- (Unit version 2.0 or higher) (Unit version 2.0 or higher) I/O control functions Monitoring contact operation counter --- ❍❍ Mounting total ON time monitor --- ❍❍ DeviceNet communications functions Number of safety I/O connections for Safety Master 16 32 32 Selecting operating mode for safety I/O communications when communications errors --- ❍❍ occur Attaching local output data to send data during --- ❍❍ slave operation Attaching local I/O monitor data to send data during --- ❍❍ slave operation Functions to communicate with devices existing on ❍ ❍ other networks --- (Unit version 2.0 or higher) (Unit version 2.0 or higher) (Off-Link connection) System startup and error recovery functions Storing log of nonfatal errors in nonvolatile memory --- ❍❍ --- ❍❍ Adding function block errors to error log Ethernet/IP communications functions I/O communications --- --- --- Message communications --- --- --- Read/write of target I/O area --- --- --- Routing between DeviceNet and EtherNet/IP --- --- --- I/O routing Message routing --- --- --- UDP/IP message communications functions Message communications by UDP/IP --- --- --- 6 NE1A-SCPU Series Unit Versions and Network Configurator Versions Network Configurator version 2.0@ or higher must be used when using a NE1A-SCPU01-V1 or NE1A-SCPU02 Safety Logic Controller with unit version 2.0. : Applicable, ×: Not applicable ❍ Network Configurator Model Ver. 1.3@ Ver. 1.5@ Ver. 1.6@ Ver. 2.0@/2.1@ Ver.2.2@ Ver.3.3@ NE1A-SCPU01 ❍❍❍ ❍❍❍ Pre-Ver. 1.0 NE1A-SCPU01-V1 ×× ❍❍ ❍ ❍ Unit version 1.0 NE1A-SCPU02 ×× ❍❍ ❍ ❍ Unit version 1.0 NE1A-SCPU01-V1 ×× ❍ (*1) ❍❍❍ Unit version 2.0 NE1A-SCPU02 ×× ❍ (*1) ❍❍❍ Unit version 2.0 *1: It can be used as unit version 1.0. Note: 1. Users who use Network Configurator version 1.5@ or earlier can upgrade to version 1.6@ at no charge. 2. When using Network Configurator version 1.6@, there are no operational differences in the NE1A-SCPU01-V1 and NE1A-SCPU02. 7 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. part of all quotes, agreements, purchase orders, acknowledgments, price lists, BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE catalogs, manuals, brochures and other documents, whether electronic or in PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR writing, relating to the sale of products or services (collectively, the "Products") INTENDED USE. Omron further disclaims all warranties and responsibility of by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron any type for claims or expenses based on infringement by the Products or oth- objects to any terms or conditions proposed in Buyer’s purchase order or other erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli- documents which are inconsistent with, or in addition to, these Terms. gation hereunder shall be, at Omron’s election, to (i) replace (in the form 2. Prices; Payment Terms. All prices stated are current, subject to change with- originally shipped with Buyer responsible for labor charges for removal or out notice by Omron. Omron reserves the right to increase or decrease prices replacement thereof) the non-complying Product, (ii) repair the non-complying on any unshipped portions of outstanding orders. Payments for Products are Product, or (iii) repay or credit Buyer an amount equal to the purchase price of due net 30 days unless otherwise stated in the invoice. the non-complying Product; provided that in no event shall Omron be responsi- 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices ble for warranty, repair, indemnity or any other claims or expenses regarding sent to Buyer after deducting transportation charges, taxes and duties, and will the Products unless Omron’s analysis confirms that the Products were prop- be allowed only if (i) the invoice is paid according to Omron’s payment terms erly handled, stored, installed and maintained and not subject to contamina- and (ii) Buyer has no past due amounts. tion, abuse, misuse or inappropriate modification. Return of any Products by 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or Buyer must be approved in writing by Omron before shipment. Omron Compa- the maximum legal rate, whichever is less, on any balance not paid within the nies shall not be liable for the suitability or unsuitability or the results from the stated terms. use of Products in combination with any electrical or electronic components, 5. Orders. Omron will accept no order less than $200 net billing. circuits, system assemblies or any other materials or substances or environ- 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all ments. Any advice, recommendations or information given orally or in writing, costs involved in, obtaining any government approvals required for the impor- are not to be construed as an amendment or addition to the above warranty. tation or sale of the Products. See http://www.omron247.com or contact your Omron representative for pub- 7. Taxes. All taxes, duties and other governmental charges (other than general lished information. real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE imposed directly or indirectly on Omron or required to be collected directly or FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, indirectly by Omron for the manufacture, production, sale, delivery, importa- LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY tion, consumption or use of the Products sold hereunder (including customs WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS duties and sales, excise, use, turnover and license taxes) shall be charged to BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. and remitted by Buyer to Omron. Further, in no event shall liability of Omron Companies exceed the individual 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory price of the Product on which liability is asserted. to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and security or payment in advance. If Buyer fails to make payment or otherwise their employees from and against all liabilities, losses, claims, costs and comply with these Terms or any related agreement, Omron may (without liabil- expenses (including attorney's fees and expenses) related to any claim, inves- ity and in addition to other remedies) cancel any unshipped portion of Prod- tigation, litigation or proceeding (whether or not Omron is a party) which arises ucts sold hereunder and stop any Products in transit until Buyer pays all or is alleged to arise from Buyer's acts or omissions under these Terms or in amounts, including amounts payable hereunder, whether or not then due, any way with respect to the Products. Without limiting the foregoing, Buyer (at which are owing to it by Buyer. Buyer shall in any event remain liable for all its own expense) shall indemnify and hold harmless Omron and defend or set- unpaid accounts. tle any action brought against such Companies to the extent based on a claim 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation that any Product made to Buyer specifications infringed intellectual property unless Buyer indemnifies Omron against all related costs or expenses. rights of another party. . Omron shall not be liable for any delay or failure in delivery Any intellectual property in the Products is the exclu- 10. Force Majeure 16. Property; Confidentiality. resulting from causes beyond its control, including earthquakes, fires, floods, sive property of Omron Companies and Buyer shall not attempt to duplicate it strikes or other labor disputes, shortage of labor or materials, accidents to in any way without the written permission of Omron. Notwithstanding any machinery, acts of sabotage, riots, delay in or lack of transportation or the charges to Buyer for engineering or tooling, all engineering and tooling shall requirements of any government authority. remain the exclusive property of Omron. All information and materials supplied 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: by Omron to Buyer relating to the Products are confidential and proprietary, a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship and Buyer shall limit distribution thereof to its trusted employees and strictly except in “break down” situations. prevent disclosure to any third party. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and constitute delivery to Buyer; licenses regarding (i) export of products or information; (iii) sale of products to c. All sales and shipments of Products shall be FOB shipping point (unless oth- “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of erwise stated in writing by Omron), at which point title and risk of loss shall regulated technology or information. pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right est in the Products until the full purchase price is paid; and no course of dealing between Buyer and Omron shall operate as a waiver d. Delivery and shipping dates are estimates only; and of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder e.Omron will package Products as it deems proper for protection against nor- without Omron's written consent. (c) Law. These Terms are governed by the mal handling and extra charges apply to special conditions. law of the jurisdiction of the home office of the Omron company from which 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Buyer is purchasing the Products (without regard to conflict of law princi- Products occurring before delivery to the carrier must be presented in writing ples). (d) Amendment. These Terms constitute the entire agreement between to Omron within 30 days of receipt of shipment and include the original trans- Buyer and Omron relating to the Products, and no provision may be changed . If any provi- portation bill signed by the carrier noting that the carrier received the Products or waived unless in writing signed by the parties. (e) Severability from Omron in the condition claimed. sion hereof is rendered ineffective or invalid, such provision shall not invalidate 13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the any other provision. (f) Setoff. Buyer shall have no right to set off any amounts Products will be free from defects in materials and workmanship for a period of against the amount owing in respect of this invoice. (g) Definitions. As used twelve months from the date of sale by Omron (or such other period expressed herein, “including” means “including without limitation”; and “Omron Compa- in writing by Omron). Omron disclaims all other warranties, express or implied. nies” (or similar words) mean Omron Corporation and any direct or indirect (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, subsidiary or affiliate thereof. EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP- with any standards, codes or regulations which apply to the combination of the ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE Product in the Buyer’s application or use of the Product. At Buyer’s request, OVERALL EQUIPMENT OR SYSTEM. Omron will provide applicable third party certification documents identifying 2. Programmable Products. Omron Companies shall not be responsible for the ratings and limitations of use which apply to the Product. This information by user’s programming of a programmable Product, or any consequence thereof. itself is not sufficient for a complete determination of the suitability of the Prod- 3. Performance Data. Data presented in Omron Company websites, catalogs uct in combination with the end product, machine, system, or other application and other materials is provided as a guide for the user in determining suitabil- or use. Buyer shall be solely responsible for determining appropriateness of ity and does not constitute a warranty. It may represent the result of Omron’s the particular Product with respect to Buyer’s application, product or system. test conditions, and the user must correlate it to actual application require- Buyer shall take application responsibility in all cases but the following is a ments. Actual performance is subject to the Omron’s Warranty and Limitations non-exhaustive list of applications for which particular attention must be given: of Liability. (i) Outdoor use, uses involving potential chemical contamination or electrical 4. Change in Specifications. Product specifications and accessories may be interference, or conditions or uses not described in this document. changed at any time based on improvements and other reasons. It is our prac- (ii) Use in consumer products or any use in significant quantities. tice to change part numbers when published ratings or features are changed, (iii) Energy control systems, combustion systems, railroad systems, aviation or when significant construction changes are made. However, some specifica- systems, medical equipment, amusement machines, vehicles, safety equip- tions of the Product may be changed without any notice. When in doubt, spe- ment, and installations subject to separate industry or government regulations. cial part numbers may be assigned to fix or establish key specifications for (iv) Systems, machines and equipment that could present a risk to life or prop- your application. Please consult with your Omron’s representative at any time erty. Please know and observe all prohibitions of use applicable to this Prod- to confirm actual specifications of purchased Product. uct. 5. Errors and Omissions. Information presented by Omron Companies has been NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS checked and is believed to be accurate; however, no responsibility is assumed RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT for clerical, typographical or proofreading errors or omissions. ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE OMRON ARGENTINA • SALES OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE OMRON CHILE • SALES OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE OTHER OMRON LATIN AMERICA SALES Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu Authorized Distributor: Automation Control Systems • Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders Temperature & Process Controllers • Single and Multi-loop Controllers Sensors & Vision • Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors • Amplified Photomicrosensors • Measurement Sensors • Ultrasonic Sensors • Vision Sensors Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators • Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches F44I-E-01 12/14 Note: Specifications are subject to change. © 2014 Omron Electronics LLC Printed in U.S.A. Printed on recycled paper.