Multi-Output Switch Mode Power Supply S82R (30/50/75-W Models) Economical, Easy-to-use Multi-Output Power Supply • 30 W, 50 W, and 75 W, two-channel multi-output power supply. • Unified depths and mounting dimensions. Three mounting methods, including front mounting. • ±12-V or ±15-V output; ideal for operational amplifiers. • UL and CSA approved. • RoHS-compliant Note: Refer to Safety Precautions on page 8. Model Number Structure ■ Model Number Legend Note: Not all combinations are possible. Please refer to List of Models in Ordering Information, below. S82R-@@@@ 13 2 4 1. Input Voltage/Configuration 2. Power Rating 3. Number of Outputs 4. Output Voltage Number Input Configura- Number Power ratings Number Number of outputs Number Output voltage voltage tion 330 W 22 V V 1 2 0 100 VAC Open-frame 550 W 15 V 12 V 2 200 VAC Open-frame 775 W 25 V 24 V 5 100 VAC Covered 712 V 12 V 6 200 VAC Covered 815 V 15V Ordering Information ■ List of Models Note: For details on normal stock models, contact your nearest OMRON representative. Type Capacity Output voltage/current Model V V 100 VAC input type 200 VAC input type 1 2 Open-frame 30 W 5V, 2A 12V, 2A S82R-0321 S82R-2321 type 5V, 2A 24V, 1A S82R-0322 S82R-2322 30 W 12V, 1.7A 12V, 0.8A S82R-0327 S82R-2327 15V, 1A 15V, 1A S82R-0328 S82R-2328 50 W 5V, 3A 12V, 3A S82R-0521 S82R-2521 5V, 2A 24V, 2A S82R-0522 S82R-2522 50 W 12V, 3A 12V, 1.2A S82R-0527 S82R-2527 15V, 1.7A 15V, 1.7A S82R-0528 S82R-2528 75 W 5V, 5A 24V, 2A S82R-0722 S82R-2722 Covered type 30 W 5V, 2A 12V, 2A S82R-5321 S82R-6321 5V, 2A 24V, 1A S82R-5322 S82R-6322 30 W 12V, 1.7A 12V, 0.8A S82R-5327 S82R-6327 15V, 1A 15V, 1A S82R-5328 S82R-6328 50 W 5V, 3A 12V, 3A S82R-5521 S82R-6521 5V, 2A 24V, 2A S82R-5522 S82R-6522 50 W 12V, 3A 12V, 1.2A S82R-5527 S82R-6527 15V, 1.7A 15V, 1.7A S82R-5528 S82R-6528 75 W 5V, 5A 24V, 2A S82R-5722 S82R-6722 http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 1 S82R Specifications ■ Characteristics Input 100 V input 200 V input Power rating 30 W 50 W 75 W 30 W 50 W 75 W Efficiency (typ.) 68% min. (depending on model) Input Voltage AC 85 to 132 V 170 to 264 V (See note 1.) DC 110 to 170 V (See note 2.) Not available Frequency (See note 1.) 50/60 Hz (47 to 450 Hz) Current (See note 3.) 1.1 A max. 1.4 A max. 2 A max. 0.7 A max. 0.8 A max. 1.1 A max. Leakage current 0.5 mA max. 1 mA max. (See note 3.) Inrush current (See note 3.) 30 A max. (for a cold start at 25°C) 60 A max. (for a cold start at 25°C) Noise filter Yes Output Voltage accuracy V : 3.5% max. V : 5% max. (with input, load, and temperature within permissible fluctuation ranges) 1 2 Voltage adjustment range Fixed except for 5-V output which can be adjusted by ±5% (with V. ADJ) (See note 4.) Ripple (See note 3.) 2% (p-p) max. Input variation influence 0.4% max. (at 85 to 132 V input, 100% load) 0.4% max. (at 170 to 264 V input, 100% load) Load variation influence V : 0.8% max. (at rated input, 10% to 100% load) V : 2% max. 1 2 Temperature variation 0.05%/°C max. (at rated input/output) influence Startup time 200 ms max. (Up to 90% of output voltage at rated input and output) Hold up time (See note 3.) 20 ms min. Ancillary Overload protection 105% min. of rated current, voltage drop, automatic reset function (See note 5.) Overvoltage protection No Others Operating temperature Refer to the derating curve in Engineering Data (with no icing or condensation). Storage temperature −25°C to 65°C Operating humidity 25% to 85% (storage humidity: 20% to 90%) Dielectric strength 2.0 kVAC, 50/60 Hz, for 1 minute (between input terminals and output terminals/PE terminal) Insulation resistance 100 MΩ min. (between output terminals and input terminals/PE terminal at 500 VDC) Vibration resistance 10 to 55 Hz, 0.75 mm single amplitude for 2 hours each in X, Y, and Z directions 2 Shock resistance 294 m/s , 3 times each in ±X, ±Y, ±Z directions Output indicator V1 output indicator only (color: red) Approved UL UL1012 standards CSA E.B.1402C Weight (See note 6.) 400 g max. 500 g max. 550 g max. 400 g max. 500 g max. 550 g max. Note: 1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal temperature of the Power Supply may result in ignition or burning. 2. These Power Supplies do not comply with safety standards if a DC power supply is used. 3. Defined with a 100% load at the rated input voltage (100 or 200 VAC). 4. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than 5% of the voltage adjustment range. When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged. 5. Refer to Overload Protection on page 4 for details. 6. Weights are given for the covered type. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 2 S82R Connections ■ Block Diagrams S82R-@@21 S82R-@@22 Rectifier Fuse Noise filter Drive overload protection circuit Rectifier Inrush current prevention Detection Photocoupler Fuse Capacity: Drive overload 30-W, 50-W models: 3 A protection circuit 75-W models: 4 A Rectifier Detection Photocoupler Inrush S82R-@@27 current S82R-@@28 prevention Fuse Noise filter Rectifier Rectifier 3-terminal regulator Drive overload protection circuit Rectifier Detection Fuse Capacity: Photocoupler 30-W, 50-W models: 3 A Construction and Nomenclature ■ Nomenclature S82R-@@21 S82R-@@27 S82R-@@22 S82R-@@28 ½ 1. V (+), G (−) 1 1 7 ¾ DC output terminals: Connect load lines. 7 2. V (+), G (−) 2 2 ¿ 8 3. Short bar: Provided to make + outputs. Without it V and V 1 2 V1 V1 outputs can be used as independent outputs. (Supplied 1 1 only for S82R-@@27 and S82R-@@28 as an accessory.) G1 G1 3 4. Protective Earthing terminal ( ): This terminal is short V2 V2 circuited to the frame and must be connected to a ground 2 2 line. G2 G2 5. Input terminal: Connect the input lines to these terminals V3 V3 6 6 Note: A fuse is located on the AC(L) side. It is NOT user 4 replaceable. 4 AC (L) AC (L) 6. V3 terminal: Vacant terminal 5 5 7. Output indicator: Lights while V DC voltage is being output. AC (N) AC (N) 1 8. Output voltage adjuster (V.ADJ): Adjusts the output voltage (provided only for 5-V output type). (S82R-@@21 and S82R-@@22) http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 3 S82R Engineering Data ■ Derating Curve (Standard Installation) Open-frame Type Covered Type Mounting View Forced air cooling Forced air cooling Natural air cooling Natural air cooling Note: The values here apply to standard installation conditions. Derating curves vary according to installation conditions. Ambient temperature (°C) Ambient temperature (°C) ■ Overload Protection This function protects the load and the Power Supply from possible damage by overcurrent. Overload detection and reset are as shown below. S82R-@@21 and @@22 S82R-@@27 and @@28 Rated voltage Rated voltage Rated voltage 0 50 100 Output current (%) Output current (%) The values shown in the above diagram are for reference only. The values shown in the above diagram are for reference only. Note: Internal parts may occasionally deteriorate or be damaged if a Output Operation Detection Reset short-circuited or other overcurrent state continues during V Voltage drop 105% of rated load Automatically reset 1 operation. current or higher by overload reset function. Output Operation Detection Reset V , V Short-circuit --- Automatically reset 2 3 V Voltage drop 105% of rated load Automatically reset 1 protection by overload reset current or higher by overload reset function. function. Note: 1. When an overload is detected for V , both outputs (V and 1 1 Note: V and V are independent, and they are detected (output shut 1 2 V ) are shut OFF. Both outputs are reset automatically. 2 OFF) and reset separately. Overload detection for the V output uses the sum of the 1 output voltages of the V and V outputs. Overload detection 1 2 thus depends on the output current (output power) of the V 2 output. 2. V is independent, and it is detected (output shut OFF) and 2 reset separately. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 4 Load (%) Output voltage (V) Load (%) Output voltage (V) S82R ■ Current, Startup Time, Output Hold Time Input ON Input OFF AC Input voltage Inrush current on input application AC Input current 90% V1: 96.5% V2: 95% Output voltage Hold time Startup time 20 ms min. 200 ms max. Dimensions Note: All units are in millimeters unless otherwise specified. Mounting Holes S82R-@3@@ (30W) 3.5 dia. 161±1 5 153±0.5 Side View Two, M3 8.2 9.5 78±0.5 97±1 78 Eight, M3.5 3.5 153 12 17.5 140.5±0.5 Bottom View Two, M3 20±0.5 40±1 28±0.5 3.5 20 10 140.5 22 127±0.5 3.5 dia. Three, M3 (depth: 6 max.) Mounting Holes S82R-@5@@ (50W) 161±1 5 153±0.5 Side View 3.5 dia. Tw Two o,, M M3 3 8.2 112±1 78 78 9.5 78±0.5 Eight, M3.5 3.5 153 153 12 Bo Botto ttom Vie m View w 17.5 140.5±0.5 Two, M3 20±0.5 40±1 3.5 28±0.5 20 10 140.5 22 127±0.5 3.5 dia. Three, M3 (depth: 6 max.) http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 5 S82R Mounting Holes S82R-@7@@ (75W) 161±1 5 153±0.5 Side View 3.5 dia. Two, M3 78 123±1 8.2 9.5 78±0.5 Eight, M3.5 153 3.5 12 Bottom View 17.5 140.5±0.5 Two, M3 44±1 20±0.5 140.5 28±0.5 3.5 20 10 22 127±0.5 3.5 dia. Three, M3 (depth: 6 max.) http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 6 S82R Installation Front Mounting ■ Front Mounting Bracket Attach the enclosed Mounting Bracket temporarily to the mounting Note: The Mounting Bracket is supplied with the Power Supply. surface, the hook the rectangular holes on the Power Supply (a) on Dimensions Mounting holes the hooks on the Bracket (b), and then tighten the two mounting screws. 55 Note: The mounting screws are not included. 51 11 4.6 75 W 50 W 30 W 1.5 Power supply 15±0.2 chassis 9 Two, M3 60 Two, 74 60 3.5 dia. 4.6 20 11 20 5 31.5 Mounting bracket 4.7 Materials: 15 Stainless steel 20.5 ■ DIN Rail Mounting Bracket (Order Separately) To mount the Power Supply to DIN Rail, use the DIN Rail Mounting Bracket. S82Y-05N Mounting Unit Bracket PFP-100N or PFP-100N2 104 47 DIN Rail Two, 4.5-dia holes 163 164.8 47 4.9 (See note 2.) 58 (Sliding: 7 max.) Thickness t = 1.6 mm Note: 1. All units are in millimeters unless otherwise indicated. 2. Add 10.5 mm to length in the diagram if the PFP-100N2 is used. ■ DIN Rail (Order Separately) Mounting Rail (Material: Alminum) PFP-100N PFP-100N2 PFP-50N 16 7.3±0.15 4.5 4.5 35±0.3 27±0.15 35±0.3 27 24 29.2 15 (5) 15 25 25 25 25 1 15 25 25 25 25 15 11.5 10 10 10 10 (See note.) 1,000 (500) 1,000 (See note.) Note: The values shown in parentheses are for the PFP-50N. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 7 S82R Safety Precautions Mounting Method !CAUTION The Power Supply can be mounted in three different mounting styles, Minor electric shock, fire, or Product failure may as follows: occasionally occur. Do not disassemble, modify, or repair (A) Side mounting the Product or touch the interior of the Product. (B) Bottom mounting Minor burns may occasionally occur. Do not touch the Product while power is being supplied or immediately (C) Front mounting after power is turned OFF. For details, refer to Front Mounting Bracket on page 7. Fire may occasionally occur. Tighten terminal screws to the specified torque 0.74 N·m (M3.5). (B) (A) Minor injury due to electric shock may occasionally occur. Do not touch the terminals while power is being supplied. Minor electric shock, fire, or Product failure may occasionally occur. Do not allow any pieces of metal or conductors or any clippings or cuttings resulting from installation work to enter the Product. ■ Precautions for Safe Use ■ Serial Operation Mounting The V output and V output cannot be operated in series. 1 2 The V or V output and other power supplies cannot be operated in Install the power supply so that heat is effectively dissipated, to 1 2 extend the life expectancy and improve the reliability of the power series. supply. Incorrect Install the power supply so that air convection takes place around the +V power supply as the power supply is designed for natural convection. Input INPUT Provide a distance of at least 20 mm between the power supplies. −V When installing two or more power supplies side-by-side, note the following points. +V INPUT −V ■ Parallel Operation The V output and V output cannot be operated in parallel. 1 2 Furthermore, the V or V output and other power supplies cannot be 1 2 operated in parallel. 20 mm min. Incorrect Provide a distance of at least 20 mm between the power supplies. +V Input INPUT Forced air cooling is strongly recommended. −V +V INPUT −V Air ■ Generating Output Voltages (±) Metal plate (S82R-@@27 and S82R-@@28) ± outputs can be made with V and V outputs by attaching the 1 2 supplied short bar. Correct V1 G1 Input INPUT V2 G2 http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 8 Load Load Load Load S82R ■ Output Voltage Adjustment (S82R-@@21 and S82R-@@22) Only the 5-V output can be adjusted. (Other outputs are fixed.) The output voltage is factory set within ±1% of the rated voltage. It can be adjusted to a desired level within ±5% of the rated output voltage by using the output voltage adjuster (V. ADJ). Note: Although it is possible to adjust the output voltage in a wider range than ±5%, do not adjust the voltage to a level exceeding or falling below the ±5% range; otherwise, the output power may exceed the rated capacity. ■ Minimum Output Current The minimum output current is restricted by the output voltage and control method. Model V output V output 1 2 S82R-@@21 No limitation No limitation S82R-@@22 S82R-@@27 With limitation No limitation S82R-@@28 (See note.) Note: S82R-@@27 and S82R-@@28 control V output directly and V 1 2 indirectly. Therefore, if V output current falls to 10% or less of 1 rated output current, V output voltage may drop. 2 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved. 9 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if speciŢ ed) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the product. At the customer's request, OMRON will provide applicable third party certiŢ cation documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufŢ cient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: • Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. • Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. • Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Disclaimers CHANGE IN SPECIFICATIONS Product speciŢ cations and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when signiŢ cant construction changes are made. However, some speciŢ cations of the product may be changed without any notice. When in doubt, special model numbers may be assigned to Ţ x or establish key speciŢ cations for your application on your request. Please consult with your OMRON representative at any time to conŢ rm actual speciŢ cations of purchased product. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This catalog shall not be copied for sales or promotions without permission. This catalog is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this catalog in any manner, for any other purpose. If copying or transmitting this catalog to another, please copy or transmit it in its entirety. 2007.3 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.