G6DN PCB Power Relay SPST Slim Power Relay for 5 A switching • Slim 5-mm width and miniature size. (20 × 5.08 × 12.5 mm) High switching capability 5 A (250 VAC and 30 VDC), and high contact reliability by crossbar-twin contact. Low power consumption 110 mW. Meets application standards EN61010-1 and EN61010-2-201 for reinforced insulation (CTI 600 V min. and Rated insulation voltage 300 V). Actualize electrical durability 100 Kops (-L type) ■Model Number Legend ■Application Examples Programmable Controller output G6DN-@@@-@ —— — — Temperature Controller 123 4 Building Automation 1. Number of Poles 3. Enclosure Rating G 1: 1-pole None: Fully sealedOutput of control system 6 D 2. Contact Form 4. Classification N A: SPST-NO (1a) None: Standard (E-LIFE 80 Kops) L: High durability type (E-LIFE 100 Kops) ■Ordering Information Classification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard G6DN-1A SPST-NO (1a) Fully sealed PCB terminal 25 pcs/ tube High durability G6DN-1A-L Note. When ordering, add the rated coil voltage to the model number. Example: G6DN-1A DC5 Rated coil voltage However, the notation of the coil voltage on the product case as well as on the packaging will be marked as @@ VDC. Example: G6DN-1A 5VDC ■Ratings ●Coil Must operate voltage (V) Must release voltage (V) Max. voltage (V) Rated current Coil resistance Power consumption (mA) (Ω) (mW) Classification Rated voltage % of rated voltage 4.5 VDC 24.4 184 5 VDC 22.0 227 Standard Approx. 110 12 VDC 9.2 1,309 24 VDC 4.6 5,236 70% max. * 5% min. 160% 5 VDC 36.0 139 High durability 12 VDC 15.0 800 Approx. 180 24 VDC 7.5 3,200 Note. The rated current and resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. * Operating voltage is less than 72% when the relay is sideways and the marking is right way. ●Contacts Resistive load Inductive load (cos φ = 0.4, L/R = 7 ms) Contact Type Cross bar twin Contact material Ag-Alloy and Au plating * 5 A at 250 VAC 2 A at 250 VAC Rated load 5 A at 30 VDC 2 A at 30 VDC Rated carry current 5 A Max. switching voltage 277 VAC, 125 VDC Max. switching current 5 A * Au plating is applied to stationary contact. 1 G6DN PCB Power Relay ■Characteristics Standard High durability Contact resistance 100 mΩ max. Operate time 10 ms max. Release time 5 ms max. Insulation resistance 1,000 MΩ min. (at 500 VDC) Between coil and 3,000 VAC, 50/60 Hz for 1 min contacts Dielectric strength Between contacts of 750 VAC, 50/60 Hz for 1 min the same polarity Surge withstand Between coil and 6 kV (1.2 ✕ 50 μs) voltage contacts Destruction 10 to 55 to 10 Hz, 2.5 mm single amplitude (5.0 mm double amplitude) Vibration resistance Malfunction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) 2 Destruction 1,000 m/s Shock resistance 2 Malfunction 100 m/s Mechanical 20,000,000 operations min. (at 18,000 operations/hr) 100,000 operations min. (3 A at 250 VAC, 3 A at 30 VDC Resistive load) 100,000 operations min. (5 A at 250 VAC, Resistive load) Durability 80,000 operations min. 100,000 operations min. (5 A at 30 VDC, Resistive load) Electrical (5 A at 250 VAC, 5 A at 30 VDC Resistive load) 200,000 operations min. (2 A at 250 VAC, Inductive load) 100,000 operations min. 200,000 operations min. (2 A at 30 VDC, Inductive load) (2 A at 250 VAC, 2 A at 30 VDC Inductive load) G Failure rate (P level) (reference value) * 0.1 mA at 0.1 VDC 6 D Ambient temperature Operating -40°C to +90°C (with no icing or condensation) N Humidity 5% RH to 85% RH Weight Approx. 3 g Note 1. Values in the above table are initial values. Note 2. The contact resistance is measured with 1 A applied at 5 VDC using a fall-of-potential method. Note 3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 500 VDC. * This value was measured at a switching frequency of 120 operations/min. 2 G6DN PCB Power Relay ■Engineering Data ●Maximum Switching Capacity ●Durability ●Ambient Temperature vs. Maximum Coil Voltage G6DN-1A, G6DN-1A-L G6DN-1A G6DN-1A, G6DN-1A-L 500 50 200 300 30 180 100 10 160 AC resistive load 50 5 250 VAC/30 VDC 140 30 3 Resistive load 25 2.5 126 120 DC resistive load 10 1 250 VAC/30 VDC 100 5 0.5 Inductive load 0.4 3 0.3 80 0.1 60 0 1 2 3 4 5 6 7 8 9 10 13510 30 100 125 277 500 1,000 0 2330 405060 70 80 90 100 Switching current (A) Switching voltage (V) Ambient temperature (°C) Note. The maximum coil voltage refers to the maximum voltage in a varying range of operating power voltage, not a continuous voltage. ●Ambient Temperature vs. Must ●Shock Malfunction G Operate and Must Release Voltages 6 G6DN-1A, G6DN-1A-L D N Y 90 1,000 Energized 80 Sample: G6DN-1A 800 1,000 1,000 Number of Relays: 5 pcs 600 70 X Z De-energized max. Test conditions: Impose a shock in the ±X, 400 X ±Y, and ±Z directions three times each with 60 min. 200 the Relay energized to check the shock values that cause the Relay to malfunction. 50 2 Standard:100 m/s 40 30 X' Z' 1,000 1,000 max. 20 X min. 2 Unit: m/s 1,000 10 Y' Shock direction X X' Y 0 −60 −40 −20 0 20 40 60 80 100 Z Ambient temperature (°C) Z' Y' Coil terminals ■Dimensions PCB Mounting Holes Terminal Arrangement/ G6DN-1A(-L) 5.08 max. (Bottom View) Internal Connections (5.05)* 20 max. (Bottom View) (19.97)* 0.1 7.62± 0.1 7.62± 12.5 max. Four, 1.1-dia. holes (12.45)* 2.54±0.1 1 2 5 8 3.3 (No coil polarity) (1.32) Two, 0.4-dia. t 0.2 t 0.26 (1.28) 2-0.8 1.28 7.62 7.62 2.54 1.32 * Average value 3 Must operate and must release voltage (ratio of rated voltage) (%) Switching current (A) 4 Durability (x10 operations) Maximum coil voltage (%) G6DN PCB Power Relay ■Approved Standards ●The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this datasheet. UL/C-UL-approved models (File No. E41515) Model Contact form Coil ratings Contact ratings Operations 5 A at 277 VAC (Resistive) 95°C 6,000 5 A at 30 VDC (Resistive) 90°C 6,000 1/10 hp 125 VAC 95°C 1,000 G6DN-1A SPST-NO 4.5 to 24 VDC 1/10 hp 277 VAC 95°C 1,000 D300 120 VAC/240 VAC 95°C 6,000 C300 120 VAC/240 VAC 95°C 6,000 R300 125 VDC/250 VDC 95°C 6,000 5 A 250 VAC (Resistive) 95°C 100,000 2 A 250 VAC (General Use) 95°C 100,000 2 A 30 VDC (General Use) 95°C 100,000 G6DN-1A-L SPST-NO 5 to 24 VDC 1/10 hp 120 VAC 40°C 6,000 C300 120 VAC/240 VAC 95°C 6,000 D150 120 VAC 95°C 6,000 R150 125 VDC 95°C 6,000 Note. CSA certification CSA 22.2 No.14 can be recognized by C-UL. G VDE (EN61810-1) (Certificate No. 40042696) 6 D Model Contact form Coil ratings Contact ratings Operations N 5 A at 250 VAC (cosφ= 1.0) 90°C 10,000 G6DN-1A SPST-NO 4.5 to 24 VDC 5 A at 30 VDC (L/R = 0 ms) 90°C 10,000 5 A 250 VAC (cosφ= 1.0) 90°C 100,000 2 A 250 VAC (cosφ= 0.4) 90°C 100,000 G6DN-1A-L SPST-NO 5 to 24 VDC 2 A 250 VAC (cosφ= 0.6) 90°C 100,000 5 A 30 VDC (L/R = 0 ms) 90°C 100,000 2 A 30 VDC (L/R = 7 ms) 90°C 100,000 Clearance distance 3.5 mm min. Creepage distance 3.6 mm min. Basic (PD.2) Type of insulation coil-contact circuit open contact circuit Micro disconnection Rated Insulation voltage 300 V Pollution degree 2 Rated voltage system 250 V Over voltage category II Category of protection according to IEC 61810-1 RT III (Sealed) Insulation material group I Tracking resistance according to IEC 60112 CTI 600 V min. Flammability class according to UL94 V-0 Coil insulation system according to UL Class B ■Precautions ●Please refer to “PCB Relays Common Precautions” for correct use. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. K276-E1-07 0817(1115)(O) 4