PDAM500-14C - POWER PARTNERS - Electronics Finder

Description

500 W, Single Output, 24 VDC@20.8 A Industrial/Medical Enclosed with Fan AC-DC Power Supply

Part Number

PDAM500-14C

Price

Request Quote

Manufacturer

POWER PARTNERS

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

Power Partners

Manufacturers Part #

PDAM500-14C

Industry Aliases

PDAM500-14C

Series

PDAM500

Factory Pack Quantity

Application

General Purpose

Connection Type

Terminal

Cooling Method

Air-Cooled

Dimensions

5.50 x 3.25 x 2.48"

Efficiency

90.0%

Environmental Conditions

General Purpose

Industry

Industrial, Medical

Input Type

AC - Class I

Input Voltage Nominal

100-240 VAC

Isolation

4000 VAC

Mechanical Style

Open / Enclosed Frame

Mounting

Chassis Mount

Number of Outputs

Operating Temperature

-40 to +70°C (see derating)

Output Amps 1

20.8 A

Output Voltage V1 Nominal

24 VDC

Package Type

Enclosed with Fan

PFC

Yes

Power

500 W

Protection Level

2xMOPP

Standard Packaging Size

3 x 5

Subcategory

AC-DC Power Supply

Datasheet

PDAM500.pdf

1759 KiB

Download

Extracted Text

PDAM500 Series 500W Power Supply • UL / IEC / EN 60601 3.1 Edition & UL / IEC / EN 60950 AM2 Safety Approvals • High power density: 500W in 3” x 5” footprint • Open Frame or Enclosed Versions Available • Remote ON/OFF Function • Built-in 12V/0.3A Auxiliary Output • Standby 5V @ 1A with Fan, @ 0.6A without Fan • High Efficiency up to 92% • P.F.C. Function >0.95 Environmental & Operating Input Input Voltage: 90-264 VAC or 120-370 VDC Operating Temperature: -40ºC to +70ºC (with derating) Input Frequency: 47-63 Hz Storage Temperature: -40ºC to +85ºC Input Current (RMS): <6.0A @ 115 VAC; <3.0A @ 230 VAC Humidity: 95% RH Power Factor: >0.95 @ full load (230 VAC) Operating Altitude <5000m for medical use Inrush Current (<2ms): <35A @ 115 VAC; <70A @ 230 VAC MTBF: >160K hours per MIL-HDBK-217F at full Earth Leakage Current: <100 uA max. load and 25ºC ambient Compliance Safety Approvals: nd Output USA/Canada: UL60601-1 3.1 Ed, UL/cUL60950-1 2 Amdt. Europe: IEC/EN60601-1 3.1 Ed, TUV EN60950-1 Total Output: 500W max. See table for details. nd CB Report 2 Amdt. Output Voltage: See table. Isoluation: 4000VAC input to output 2x MOPP Hold Up Time: 8ms typical at 115VAC nominal line. (Note 4) 1500VAC input to ground 1x MOPP 1500VAC output to ground 1x MOPP Efficiency: Up to 92%. See table for details. EMC (IEC50501-1-2:2014): FCC Class B Radiated & Conducted EN55011/55022 Class B Radiated & Minimum Load: 0% Conducted Harmonic Currents: IEC 61000-3-2 Voltage Flicker: IEC 61000-3-3 Electrostatic Discharge: IEC 61000-4-2: 15kV air, 8kV contact Radiated Immunity: IEC 61000-4-3: 10V/m EFT/Burst: IEC 61000-4-4: +/-2kV Protection Surge Immunity: IEC 61000-4-5: 2005 1kV diff, 2kV com Conducted Immunity: IEC 61000-4-6: 10Vms Overvoltage: 110-132%, Auto Recovery Magnetic Field: IEC 61000-4-8: 30A/m Dips / Interruptions: IEC 61000-4-11: 30% reduction for Overcurrent: 145-170%, Auto Recovery 500ms, 100% reduction for 10 ms. Short Circuit: Auto Recovery General Dimensions: 3.0”W x 5.03”L x 1.38”H Weight: 450 g Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Your Partners in Power……... Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PDAM500: March 2, 2017 Medical AC/DC Power PDAM500 Series 500W Power Supply Models and Ratings Output Max Load Max Load 30CFM Output Ripple & Efficiency Fan 1 +5VSB Model 2 7 6 Output Voltage Convection Forced Air Regulation Noise (230 VAC) Output PDAM500-12A 12V 20A 41.5A +/-1.2% 160mV 90.5% 12V/0.3A 5V/1A PDAM500-13A 15V 14.66A 33.3A +/-1.0% 160mV 90.5% 12V/0.3A 5V/1A PDAM500-14A 24V 10A 20.8A +/-1.0% 240mV 92% 12V/0.3A 5V/1A PDAM500-18A 48V 5A 10.41A +/-1.0% 480mV 93% 12V/0.3A 5V/1A Note: 1. All models are available in an enclosed version (e.g. PDAM500-12A would be PDAM500-12C) 2. Listed values are taken at 230VAC. At 115VAC, 19.16A, 9.58A, and 4.8A for the models listed as shown. 3. Recommended to add Varistor 14S471K at L/N input side in parallel. 4. Hold-up Time measured at 90% Vout 5. Main Vout >3% Load, 12V (Aux) / 0.3A. 6. Measured at 20MHz bandwidth with a 47uF electrolytic capacitor and 0.1uF ceramic capacitor in parallel at the output connector. 7. With convection cooling, 0.6A Block Diagram Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Your Partners in Power……... Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PDAM500: March 2, 2017 Medical AC/DC Power PDAM500 Series 500W Power Supply Mechanical Outline (Open Frame) PIN # Signal 1 FG 2 AC IN (N) 3 AC IN (L) 4-6 +DC OUT 7-9 -DC OUT Connector Pin (FAN) PIN # Signal F1 +12V F2 GND Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Your Partners in Power……... Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PDAM500: March 2, 2017 Medical AC/DC Power PDAM500 Series 500W Power Supply Mechanical Outline (Enclosed) Connector Pin (CN1) PIN # Signal C1 -5VSB C2 +5VSB C3 GND C4 DC OK C5 -RC C6 +RC C7 -S C8 +S Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Your Partners in Power……... Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PDAM500: March 2, 2017 Medical AC/DC Power PDAM500 Series 500W Power Supply Function Description of CN1 Pin No. Function Description C1 -5VSB This pin connects to the negative terminal (-V). Return for DC-OK and –RC signal out- put. C2 +5VSB Stand by voltage output ground 3.7~6V, referenced to pin C8 (+5VSB). The maximum load current is 0.6A. C3 GND This pin connects to the negative terminal (-V). Return for DC-OK and –RC signal out- put. C4 DC OK DC-OK signal is a DC output, referenced to pin C6 (DC-OK GND). C5 -RC This pin connects to the negative terminal (-V). Return for DC-OK and –RC signal out- put. C6 +RC Turns the output on and off by electrical or dry contact between pin C4 (-RC), Short: Power OFF, Open: Power ON. C7 -S Negative sensing. The –S Signal should be connected to the negative terminal of the load. The –S and +S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.3V. C8 +S Positive sensing. The +S Signal should be connected to the negative terminal of the load. The +S and –S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.3V. Function Manual & Application 1. DC-OK Signal Between DC-OK and Output GND Status 3.7~6V ON 0~1V OFF 2. Remote Control The unit can be turned ON/OFF by using the “Remote Control” function. Between +RC and Output -RC Status SW ON (Short) OFF SW OFF (Open) ON Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Your Partners in Power……... Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PDAM500: March 2, 2017 Medical AC/DC Power PDAM500 Series 500W Power Supply Power Derating 500W with 25 CFM FAN Power Derating Curve 240W Air Convection at 230 VAC 230W Air Convection at 115 VAC (Operating Temperature °C) Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Your Partners in Power……... Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PDAM500: March 2, 2017 Medical AC/DC Power PDAM500 Series 500W Power Supply Efficiency Versus Load PDAM500-12 VIN VS Efficiency LOAD VS Efficiency Input Voltage (V) 90 115 180 230 264 Load (%) 10 20 30 40 50 Efficiency (%) 85.78 86.58 89.21 90.01 90.34 115V (%) 86.67 89.20 89.80 90.06 89.87 230V (%) 88.19 90.82 91.00 91.71 91.86 Load (%) 60 70 80 90 100 115V (%) 89.30 88.77 88.18 87.27 86.58 230V (%) 91.77 91.40 90.79 90.44 90.01 PDAM500-14 VIN VS Efficiency LOAD VS Efficiency Input Voltage (V) 90 115 180 230 264 Load (%) 10 20 30 40 50 Efficiency (%) 87.99 88.84 91.29 92.13 92.48 115V (%) 86.38 90.14 91.42 91.48 91.52 230V (%) 87.90 91.79 93.12 93.40 93.58 Load (%) 60 70 80 90 100 115V (%) 91.12 90.61 90.20 89.35 88.84 230V (%) 93.39 93.27 92.72 92.47 92.13 Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Your Partners in Power……... Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PDAM500: March 2, 2017 Medical AC/DC Power PDAM500 Series 500W Power Supply Efficiency Versus Load PDAM500-18 VIN VS Efficiency LOAD VS Efficiency Input Voltage (V) 90 115 180 230 264 Load (%) 10 20 30 40 50 Efficiency (%) 87.36 89.18 92.88 93.89 94.33 115V (%) 86.60 90.27 91.54 91.83 91.84 230V (%) 89.45 93.31 94.10 94.45 94.66 Load (%) 60 70 80 90 100 115V (%) 91.67 91.33 90.72 90.14 89.47 230V (%) 94.65 94.47 94.22 94.29 93.96 Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Your Partners in Power……... Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PDAM500: March 2, 2017 Medical AC/DC Power

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products