 Class II Configuration  Efficiency Level VI  Interchangeable Plugs for Worldwide Use  Optional USB (5V only) or Cable Output  Short Circuit Protection  Overload Protection  No Load Operation Electrical Specifications Input Environmental & Operating 0ºC to +60ºC (Derate output power linearly Operating Temperature from 100% at 40°C to 50% at 60°C) Input Voltage 90-264VAC Storage Temperature -20ºC to +85ºC Input Frequency 47-63 Hz Operating Altitude <5000m Input Current <0.6A, 115VAC– 230VAC Operating Humidity 10% - 90% non-condensing Safety Isolation 3.0kVAC Input to Output Storage Humidity 5% - 90% non-condensing MTBF: >100,000 hours per MIL-HDBK-217F at Inrush Current <30A peak @ 115VAC, cold start at 25ºC full load and 25ºC ambient <60A peak @ 230VAC, cold start at 25ºC Compliance No Load Power < 100mW Safety Approvals USA UL60950-1 Output Canada cUL60950-1 Europe TUV EN60950-1/A12: 2011 CB Report Total Output 6W EMC: FCC Class B Radiated & Conducted Output Voltage See table CISPR22 Class B Radiated & Conducted Hold Up Time >8.3 msec @ full load and 115VAC/60Hz EN55022 Class B Radiated & Conducted input Turn On Time <3 seconds Harmonic Currents IEC 61000-3-2 Efficiency DOE Level VI Compliant Voltage Flicker IEC 61000-3-3 Minimum Load No minimum load Electrostatic Discharge IEC 61000-4-2: 8kV Air, 6kV contact Switching Frequency 50 kHz typical Radiated Immunity IEC 61000-4-3: 3V/m Line Regulation <± 1% of rated output voltage at full load EFT/Burst IEC 61000-4-4: +/-1kV Surge Immunity IEC 61000-4-5: 2005 1kV diff, 2kV com Conducted Immunity IEC 61000-4-6: 3Vrms Magnetic Field IEC 61000-4-8: 1A/m Protection Dips / Interruptions IEC 61000-4-11: 30% reduction for 500ms, >95% reduction for 10ms. Overvoltage 150% Max. of rated voltage. Latching mode. Cycle AC for recovery General Short Circuit Hiccup mode. Auto recovery. 2.20”(56.0mm)L x 1.46”(37.0mm)W x 1.26”’(32.0mm)H Dimensions Overcurrent 150% Max. of rated current. Auto- Interchangeable Plugs restart when fault removed. AC Input Ingress Output Plug Barrel Type: 5.5mm x 2.1mm x 9.5mm IP22 Compliant Center positive (others upon request) Optional USB output for 5V models Weight 0.3 pounds Your Partners in Power……... Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Tel: (978)567-9600 | Fax: (978)567-9601 Specifications subject to change. Website: www.powerpartners-inc.com PEAW6I: April 3, 2018 Wallmount AC/DC Power Models and Ratings Chart Model No. Output Current Total Power Output Ripple & Efficiency voltage Regulation Noise (Vp-p) Level PEAW6I-10-B1 5VDC 1.20A 6W ± 5% 100mV VI PEAW6I-10-USB 5VDC 1.20A 6W ± 5% 100mV VI PEAW6I-11-B1 9VDC 0.66A 6W ± 5% 180mV VI PEAW6I-12-B1 12VDC 0.50A 6W ± 5% 180mV VI Notes:  Ripple & Noise is measured using a 20MHz bandwidth oscilloscope with a 0.1uf ceramic capacitor and 4.7uf electrolytic capacitor in parallel across the output at full load and nominal line voltage.  PEAW6I-10-USB has a standard USB A output port. All other models have at 4ft cable terminated with a 5.5 x 2.1mm barrel connect-or. Consult PPI for custom connectors. Mechanical Outline Your Partners in Power……... Power Partners, Inc. | 43 Broad Street | Hudson, MA 01749 Specifications subject to Tel: (978)567-9600 | Fax: (978)567-9601 change. PEAW6I: April 3, 2018 Website: www.powerpartners-inc.com Wallmount AC/DC Power