F-218 (Rev 15FEB18) ET60S–D04–3–08–A04–L–V1–S ™ EXTreme Ten60Power SOCKET Mates with: POWER SIGNAL POSITIONS ET60T ROWS ET60S OPTION (RIGHT) PER ROW SPECIFICATIONS For complete specifications and recommended PCB layouts see –0 –00 www.samtec.com?ET60S = No Signal = No Signal –AXX Insulator Material: = AC Power Positions Black LCP –3 –08 (–02, –03, –04, –05, –06 positions only) Terminal Material: = 3 Rows = 3 Row only Signal: Copper Alloy Power: Copper Alloy –DXX –5 –01, –02, –03, –04, Plating: = DC Power Positions = 5 Rows Au or Sn over ( –02, –03, –04, –05, –06, –07, –05, –06, –07, –08 50 µ" (1.27 µm) Ni –08, –09, –10 positions only) = 5 Row only Current Rating: Power: 60 A max per blade (2 pins powered) –SXX* Signal: 2.8 A max = Split Power (6 pins powered) Operating Temp Range: –000 -40 °C to +105 °C Note: = No Power RoHS Compliant: –SXX* –T* are Preliminary Yes PROCESSING A B C (2.54) (7.50) (5.50) POWER POWER A C .100 Lead-Free Solderable: .295 .217 POSITIONS POSITIONS AC DC Yes (LEFT) (RIGHT) POWER POWER (18.00) (7.50) (5.50) .709 –02 –02 RECOGNITIONS .295 .217 (15.00) (11.00) For complete scope of –03 –03 .591 .433 recognitions see (22.50) (16.50) www.samtec.com/quality –04 –04 .886 .650 A + C + B + (33.98) 1.338 (30.00) (22.50) –05 –05 FILE NO. E111594 1.181 .886 (37.50) (27.50) –06 –06 1.476 1.083 CREEPAGE (33.00) (2.60) N/A –07 –07 .102 1.299 AND CLEARANCE (38.50) –08 –08 N/A 1.516 (0.64) (3.00) .025 .118 (44.00) (4.81) (5.17) –09 –09 N/A SQ .189 1.732 .204 (49.50) N/A –10 –10 1.949 ET60S–D03–3–08–A03–X–V1–S Selectively loading contacts achieves customer D (2.00) .079 specific creepage and C A clearance requirements. 3 ROWS 5 ROWS TAIL Contact asp@samtec.com E F E F (2.83) (2.83) (2.50) –VP .111 .111 .098 (3.28) .129 (2.60) N/A –V1 .102 A + C + D + (34.21) 1.347 (2.83) Notes: .111 Some lengths, styles and E F options are non-standard, (8.82) non-returnable. (2.00) (5.32) (0.93) (9.18) .347 .079 (5.28) .209 .037 .361 ™ .208 EXTreme Ten60Power (6.60) .260 (1.65) .065 is a trademark of Molex ET60S–D04–5–03–A04–X–VP–S Incorporated and is dual ® sourced by Molex Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. ET60S–A04–5–03–D04–L–VP–S ET60S–D04–5–03–A04–S–R1–S ET60S–D04–3–08–A04–L–R1–S ET60S SERIES ™ EXTreme Ten60Power SOCKET POWER GUIDE PLATING TAIL OPTION (LEFT) POST (Required callout) –L –AXX –VP = 10 µ" (0.25 µm) Gold on contact, = AC Power Positions = Vertical Press-fit –S Matte Tin on tail (–02, –03, –04, –05, –06 positions only) = Side (Not available for 5 rows) –V1 Guide Post –DXX = Vertical through-hole –S = DC Power Positions (Use with (1.60 mm) .062" thick card) –T* = 30 µ" (0.76 µm) Gold on contact, (–02, –03, –04, –05, –06, –07, (–0 and –3 Row only) = Top Matte Tin on tail –08, –09, –10 positions only) Guide Post –R1 –SXX* = Right-angle through-hole = Split Power (Use with (1.60 mm) .062" thick card) D –000 (2.00) A C .079 = No Power Note: –SXX* –T* are Preliminary (0.64) .025 SQ A + D + C + (27.21) 1.071 F A + D + C + (34.21) 1.347 SIGNAL SIGNAL (3.33) POSITIONS POSITIONS B D (25.22) .131 PER ROW PER ROW DIA .993 (3 Row) (5 Row) N/A –01 (2.00) –02 .079 (5.50) (5.50) (4.94) .194 (5.27) E (4.00) .217 (4.48) –03 .217 .207 .157 .176 ET60S–D04–5–03–A04–X–R1–S (6.00) (14.48) –04 .236 .570 (17.78) –08 .700 (8.00) –05 .315 C A (10.00) (7.50) B (5.50) –06 .295 (2.54) .100 .394 .217 (12.00) –07 (10.00) .472 .394 (14.00) –08 .551 (0.64) .025 SQ A + B + C + (26.98) 1.062 A + B + C + (33.98) 1.338 TAIL E F (2.50) .098 (2.84) –R1 .112 (5.00) .197 (5.60) .220 (4.81) (5.17) (5.50) (5.50) (5.50) .189 .217 .217 .204 (7.50) .217 (3.00) (3.00) .118 .295 .118 ET60S–D03–3–08–A03–X–R1–S Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.