Fuseholder Blocks & Clips OGD-SMD https://www.schurter.com /PG02b Fuseholder Open Design, 5 x 20 / 6.3 x 32 mm, SMD, VDE: 250/500 VAC, UL/CSA: 600 V, Cover, IEC 60355-1 See below: 250/500 VAC · 4 W / 10 A (VDE) · 600 V · 16 A (UL/CSA) Approvals and Compliances Description Applications - Fuseholder for 500 VAC (according to IEC) or 600 V (according to UL / - Equipment with three-phase supply (400 VAC) CSA) applications References - Suitable for use in devices according to IEC 60335-1 Ed. 4.0 for appli- Phase-Out: 0031.8241.F1, 0031.8242.F1 ances in unattended use (clause 30.2.3). This includes the enhanced Last order possibility: 30.09.2017 requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Or- Last delivery date: 31.12.2017 der number: 0031.8242 or 0031.8242.F1 Weblinks - Fuse block accepts 5x20 or 6.3x32 fuse-links pdf datasheet, html-datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Accessories, Detailed request for product, Microsite Technical Data Shock-Safe Category PC1 Soldering Methods Reflow (lead-free) Soldering Profile Fuse-Link 5 x 20 or 6.3 x 32 mm Solderability 245-260 °C / max. 30 sec acc. to JE- Mounting PCB DEC J-STD-020D Attachment Screw or Rivet Contact Resistance ≤ 10 mΩ at 20 mV acc. to IEC 60127-6 Terminal Solder SMT Dielectric Strength > 3 kV between life parts Rated Voltage 250/500 VAC (VDE), 600 V (UL/CSA) (50 Hz: 1 min) Rated current 10 A (VDE), 16 A (UL/CSA) Impulse Withstand Voltage > 6 kV between life parts Rated Power Acceptance IEC 4 W / 10 A @ Ta 23 °C Insulation Resistance > 10 MΩ between life parts 2.5 W / 10 A with transparant cover (500 VDC: 1 min) Degree of Protection IP 20 (with cover) Overvoltage Category III acc. to IEC 60664-1 Protection Class Suitable for appliances with protection Pollution Degree 3 acc. to IEC 60664-1 class I acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Cover Thermoplastic black UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight 3.7 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Rated Voltage, Power Acc./ Current Rating, Approvals Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: OGD-SMD Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40008993 VDE Approvals VDE VDE Certificate Number: 40018378 UL Approvals UL UL File Number: E39328 Fuses 1 Fuseholder Blocks & Clips OGD-SMD https://www.schurter.com /PG02b Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Fuseholder general requirements Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Dimension [mm] 35.4 mm ø 4.8 1.1 ø 2.7 4.6 16 4 20 9.7 10.9 35.4 Solder pads 2 Fuses 13.4 12.7 0.7 12 Fuseholder Blocks & Clips OGD-SMD https://www.schurter.com /PG02b Derating Curves 4.0 3.5 3.0 I = 1.0 I n 2.5 I = 0.7 I n 2.0 I = << I n 1.5 1.0 0.5 0.0 020406080 100 Ambient Air Temperature Ta °C All Variants Holder Material Reflow Condition Remark Order Number l Thermoplastic acc. to JEDEC J-STD-020D, Tp=245 +0/-5 °C, tp = max. 30 s - 0031.8241 █ l Thermoplastic acc. to JEDEC J-STD-020D, Tp=245 +0/-5 °C, tp = max. 30 s - 0031.8241.F1 l Spec. Thermoplastic 2 acc. to JEDEC J-STD-020D, Tp=260 +0/-5 °C, tp = max. 30 s - 0031.8242 l Spec. Thermoplastic 2 acc. to JEDEC J-STD-020D, Tp=260 +0/-5 °C, tp = max. 30 s - 0031.8242.F1 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Spec. thermoplastic is suitable for use in devices according to IEC 60335-1 for appliances in unattended use (clause 30.2.3). This standard includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Packaging Unit xxxx.xxxx Bulk 178 x 91 x 71 mm (100 pcs.) xxxx.xxxx.F1 Bar Packaging (20x50 pcs.) Accessories Description Cover for OGD, OGD-SMD Cover for Holder OGD, OGD-SMD The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Fuses 3 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Admissible Power Acceptance in Watt 04.06.2018